Which one?

[loosecannon]

I did one rim as a test and now I'm stuck. I like both but I can't decide...

Any inputs?

Left: black face, white lip. All plastidip.
Right: original hypersilver finish.

http://i1046.photobucket.com/albums/b466/kalfun/Cars/Mazda%203/IMG_20120317_144959.jpg

[Kiyomi]

i like the left one cause its something different.

[rzapata]

Hmm, the one to the left looks ok. Although, I'd keep the silver lip. :)

[Mazdy]

A. Left because its something diff.

B. because Right is getting over played

[Jackal]

Both look great. I'd go with the hypersilver finish. Set up a poll!

[guzman]

I pick the left one seeing as you have CWP I think it'll look great...great job on it as well :thumbsup

[Shinglez]

Exactly what's been said before...the one on the left! :thumbsup Style points ftw!

[DumpInfo]

Out of the two without knowing how it will look on your car I'd say hypersilver as the black ones look cheap.

[stevenma188]

Another vote for black face and silver lip.

[Shinglez]

Another vote for black face and silver lip.

It's white...even better ;)

[stevenma188]

Hmm, the one to the left looks ok. Although, I'd keep the silver lip. :)


Another vote for black face and silver lip.

That's what I was referring to.

[against the grain]

hyper silver...

[Soyabean]

Hands down stick with hyper silver

[loosecannon]

Thanks for the input. I continued onto another rim and I'm getting this...

http://i1046.photobucket.com/albums/b466/kalfun/Cars/Mazda%203/IMG_20120317_174817.jpg

Random orange specks. I have used a wheel cleaner on all of them but only two rims are showing these symptoms. So it can't be the wheel cleaner... wtf could this be?

[bluemazda3]

I like hyper silver,,, but nice job nonetheless :thumbsup

[Eddie81]

I like silver even tough the black is not bad but the white lip is toooo big and not foun of white it will be dirty all the time. Try different lip colour on top of black :)

[loosecannon]

My project has turned into a nightmare. I got a power washer to remove the plastidip and now there's some left on the wheel and I can't seem to get it off, even with a brush....

...halp!

http://img.tapatalk.com/4ac609d5-1b3b-8d87.jpg
http://img.tapatalk.com/4ac609d5-1b75-6199.jpg
http://img.tapatalk.com/4ac609d5-1b82-1184.jpg
http://img.tapatalk.com/4ac609d5-1ba6-b5a9.jpg

FML.

[Juank]

My project has turned into a nightmare. I got a power washer to remove the plastidip and now there's some left on the wheel and I can't seem to get it off, even with a brush....

...halp!

http://img.tapatalk.com/4ac609d5-1b3b-8d87.jpg
http://img.tapatalk.com/4ac609d5-1b75-6199.jpg
http://img.tapatalk.com/4ac609d5-1b82-1184.jpg
http://img.tapatalk.com/4ac609d5-1ba6-b5a9.jpg

FML.
how many coats did u apply?

[Jackal]

In the last pic, it looks like some of the hyper silver paint came off. Or is that just the lighting?

[The Wolf]

This is why I now hate plastidip. I had the same problem and had to sand it off...

[loosecannon]

how many coats did u apply?

It was the third coat when I realized something was wrong and washing it off and starting over was the only option.


In the last pic, it looks like some of the hyper silver paint came off. Or is that just the lighting?

It's just the florescent lighting in my garage.


This is why I now hate plastidip. I had the same problem and had to sand it off...

I read that Goo-gone should be able to get the remaining bit off. I'm going to try it on my next day off...

[Hyperion]

I had that.
I applied more so that it could peel off like a bandage.