2.5L foglight housings retrofit to HID round's

[js593]

I'm looking at replacing the entire plastic part that has the foglight installed (currently the rectangular one) with a round one. Other then a custom build project on this, is there any other option?

i would like to upgrade to HID Fog's, but unsure of where to look for a new backing plate for the round units.

Any suggestions?

[yearoftherat]

Unless you go oem round ones from a MS, I don't think there are any aftermarket fog kits for the 2011s that use a round housing.

[js593]

Unless you go oem round ones from a MS, I don't think there are any aftermarket fog kits for the 2011s that use a round housing.

I was going to adapt a custom plate and hook up a set of OEM MS3 housings into a new plate with the preexisting triantgular holes..... or just upgrade the bumper to the MS3, but i dont think that the bumper will fit without the hood, fenders, and adaption kit.

[PR3Y11]

if you find a way to do it to your car and a speed, i'll trade you my round fog housing for your rectangular =]

[yearoftherat]

So something like this....

http://img861.imageshack.us/img861/4519/41397803.jpg (http://imageshack.us/photo/my-images/861/41397803.jpg/)


Did they redesign the 2012 from the 2011?