Fog lights into a GX

[CyclopsFuzzBall]

I did a search and didn't find what I needed. So the question, I have a 2010 Mazda3 GX and am interested in installing the Mazda3 foglights into the front. I have found a couple half decent deals aroundthe web, however, does anyone know if the 2010s come pre wired for putting fog lights in? I know that I would need to get a switch but the main concern is if the wiring is already there.
Cheers

[Booter22]

you need to switch, more so the arm for the lights by the steering wheel to turn the oem lights on, then of course the wiring harness and assembly themselves. put fogs in both mine and the gfs car. totally worth the cost.

[CyclopsFuzzBall]

you need to switch, more so the arm for the lights by the steering wheel to turn the oem lights on, then of course the wiring harness and assembly themselves. put fogs in both mine and the gfs car. totally worth the cost.

how much did the set up run you? and how much of a pain in the ass was it to replace the switch?

[Akiba48]

I did a search and didn't find what I needed. So the question, I have a 2010 Mazda3 GX and am interested in installing the Mazda3 foglights into the front. I have found a couple half decent deals aroundthe web, however, does anyone know if the 2010s come pre wired for putting fog lights in? I know that I would need to get a switch but the main concern is if the wiring is already there.
Cheers

It depends on your manufacturing date. Just PM FLIPDADY aka Joe @ MoT your VIN and he can look it up on which specific part you need.
I just got mine installed by Hyperion a couple of days ago. The wiring is already there, all you need to do is plug the wires.

The whole kit which includes the fog lights, the silver trim pieces, harness, screws and signal stalk will run you approximately $400 tax incl. However, your model may vary of course :P