View Full Version : Have you ever seen 17x10 on a mazda3?
Have you ever seen 17x10 on a mazda3?
why 17?
But in short, 10" has been done before. I've seen 11" on a mazda over at MF I believe
why 17?
But in short, 10" has been done before. I've seen 11" on a mazda over at MF I believe
you thinck i should put 18?
loosecannon
10-12-2012, 12:16 PM
What are you trying to achieve here? Mexiflush? Demon camber?
What are you trying to achieve here? Mexiflush? Demon camber?
Just a sick stance
The Wolf
10-12-2012, 07:46 PM
10's on the rear is fairly easy. The front is tricky
Jackal
10-12-2012, 08:53 PM
Go 10s rear and 9s front.
i thinck it will be 18x9.5 +25 front and +19 rear with 225s or 215/40s
Dave_The_BMXER
10-13-2012, 11:21 AM
Not sure that will fit. But I am too lazy currently to look.
Aitch
10-13-2012, 01:44 PM
18x9.5 +25 will need a lot of camber on the front to fit.
I have 18x9 +25s for sale though if you're set on going in this direction.
Kiyomi
10-13-2012, 07:05 PM
i thinck it will be 18x9.5 +25 front and +19 rear with 225s or 215/40s
i think this is a cool setup, but imo. you might wanna go with x9 and save yourself having to pull/roll to get that hellaflush look. and in the front, even 35, ull be pushing out quite a bit to mexi. its when people go overboard with the hellaflush/camber stuff that it just looks silly. just 2 cents. keep updated when u get the setup :D
schmat66
10-13-2012, 07:09 PM
18 x 10 all around i believe
http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/292854_547124705312104_2046554990_n.jpg
Impressive
10-13-2012, 07:15 PM
18 x 10 all around i believe
http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/292854_547124705312104_2046554990_n.jpg
Looks stupid as ****.
schmat66
10-14-2012, 03:12 AM
Looks stupid as ****.
actually its beautiful.. but to each is own
silverstarmazda
10-14-2012, 04:38 AM
i like it, maybe less camber for function and more for show. i think op wants a dragster look, even though were FWD
Dave_The_BMXER
10-14-2012, 09:38 AM
Wouldn't fit with less camber. Also with that being a speed fitting that size up front on a normal 3 will be work.
silverstarmazda
10-14-2012, 09:42 AM
there was a mazda with cut and flared fenders... he's a member on M3F
CelestSpeed3
10-14-2012, 10:37 AM
Tigermack I think is who you are referring to.
Dave_The_BMXER
10-14-2012, 12:16 PM
Tigermack is a G I want his 18x9 rpf1 setup.
Rob23
10-14-2012, 12:29 PM
Looks stupid as ****.
lol +1
Impressive
10-14-2012, 02:08 PM
actually its beautiful.. but to each is own
Maybe on your car it would, but some idiot just wasted a perfectly good speed. I hope his axle breaks.
schmat66
10-14-2012, 02:35 PM
Wouldn't fit with less camber. Also with that being a speed fitting that size up front on a normal 3 will be work.
Maybe on your car it would, but some idiot just wasted a perfectly good speed. I hope his axle breaks.
not a speed, bam
http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash4/308055_474946635861845_1614464471_n.jpg
silverstarmazda
10-14-2012, 02:51 PM
not a speed, bam
http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash4/308055_474946635861845_1614464471_n.jpg
i wanted to do that to my grill too! i see he has a lip under his lip
Impressive
10-14-2012, 03:49 PM
In that case, it's alright. Ridiculous for a DD tho.
i think this is a cool setup, but imo. you might wanna go with x9 and save yourself having to pull/roll to get that hellaflush look. and in the front, even 35, ull be pushing out quite a bit to mexi. its when people go overboard with the hellaflush/camber stuff that it just looks silly. just 2 cents. keep updated when u get the setup :D
I don't care if i need to pull! So i think it will be perfect!
18 x 10 all around i believe
http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/292854_547124705312104_2046554990_n.jpg -15
I talked with him, 18x10 +25 in front, 18x10 -15 in the back. -10 degree camber. 215/35/18
i wanted to do that to my grill too! i see he has a lip under his lip
Its a 06 subaru sti front lip, i order it yesterday with add-on side skirt!
This is my car
http://i894.photobucket.com/albums/ac146/mazdab7/sml23.jpg
http://i894.photobucket.com/albums/ac146/mazdab7/sml25.jpg
http://i894.photobucket.com/albums/ac146/mazdab7/SMLFOLLE.jpg
It was 17x9 +25 all around with 205/50r17... It's decided, my next setup will be 18x9.5 +25 front +19 rear with 215/40r18
silverstarmazda
10-14-2012, 08:06 PM
that is a ridiculously nice car, jealous lol
that is a ridiculously nice car, jealous lol
haha thanks! but wait to see next summer :)
Dave_The_BMXER
10-14-2012, 08:29 PM
not a speed, bam
Any close up front fender shots?
schmat66
10-14-2012, 10:23 PM
Any close up front fender shots?
front or rear?
The Wolf
10-14-2012, 10:26 PM
Close up:
http://loyalkng.com/wp-content/uploads/2009/04/smashed-car.jpg
Dave_The_BMXER
10-15-2012, 08:51 AM
front or rear?
front
http://www.youtube.com/watch?v=QfkPQNg6vMc&feature=autoplay&list=PLA6C6859530BA00AA&playnext=2
schmat66
10-15-2012, 01:53 PM
this work
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/530437_3325754935517_1859825861_n.jpg
Dave_The_BMXER
10-15-2012, 02:58 PM
Damn, I was assuming a massacre on the fenders, actually not bad.
schmat66
10-15-2012, 03:40 PM
i love his car
The Wolf
10-15-2012, 04:43 PM
The rear is/was caved in at one point
rl777
10-15-2012, 10:00 PM
I love every single part of this thread. :)
Powered by vBulletin® Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.