PDA

View Full Version : Fog lights where to buy



Carnage
10-21-2012, 04:26 PM
I'm driving a 2008.5 Mazda 3 GS so I don't have fog lights just the plastic piece where the fogs should be. Do I have any other options then online only for where I can buy the entire kit for fogs?

I'm afraid if I buy them off ebay they will end up being crap. Is the installation process hard?

http://www.ebay.ca/itm/JDM-YELLOW-07-09-MAZDA-3-SEDAN-4-DOOR-BUMPER-FOG-LIGHTS-REPLACEMENT-LAMP-SWITCH-/370670556497?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AMazda|Year%3A2008|Model%3A3&hash=item564dafd551

Impressive
10-21-2012, 05:31 PM
Install is plug and play apparently.

Visit NextMod or G16 for a set but try to get glass lenses instead of plastic as they hold up much better!

07carbon3
10-21-2012, 05:45 PM
you are correct but unless the op has plans to put hid's in the fogs there no real need to spend the extra at the dealership for glass lenses the plastics will be fine with halogen/led bulbs they won't melt the leneses

DarkKilla
10-21-2012, 11:13 PM
I bought mine off of ebay couple months ago for somewhere around $60-$70 including shipping. I knew it was the cheaper ones and they were plastic. I was concerned that they were plastic since I put HIDs in them, but so far they have not melted. I would definetly prefer the glass ones but they would be about $100. Installation is quite easy, especially if you are not putting in HIDs. However, I did have to spend about $50 to buy two harnesses from the dealership to convert the plugs in to bumper to 9006/H11. On pre-2007 models, 9006 plugs were in the bumper, after 2007, they included the same plugs as the airbag plugs in the bumper and they aren't compatible with the bulbs. I guess you could cut them off and splice into it to get it working but I wanted to keep it as clean, waterproof and oem looking as possible.