Krown & Sound deadining

[genericmoniker]

Tried searching, couldn't really find anything with any solid information.

Just wondering how dynamat/secondskin stuff holds up to krown? Aside from obviously having the thoroughly clean the application area, if there anything else I should be concerned about?

[Default User]

You should be good

Unless you JUST did the dynomat.

[M3_Bernard]

So you have anti rust already and plan on putting sound insulation? I'm planning the same thing and thinking of doing anti grease on the portions I'm gonna install the mat but not sure if that's enough.

Oh and tons of towels!:P

[genericmoniker]

Yeah, I've had the car rust proofed the past two years, probably going to be hitting my trunk and doors with some dynamat, was just wondering if there was any negatives to it.

[M3_Bernard]

If they sprayed on the inside of the doors then you will probably have to clean it off before you can stick the sound deadening.
Otherwise it will peel off.

[Lumberjack]

If there is Krown on the metal now and you clean it off how are they going to apply it again? Kinda defeats the purpose of getting it spayed... I would check if it will void the Krown warranty too. I used to be heavily into car audio years ago. Curious as to why you are sound deadening it? Are you hearing "resonance" (pieces rattling) from inside the car?




Tried searching, couldn't really find anything with any solid information.

Just wondering how dynamat/secondskin stuff holds up to krown? Aside from obviously having the thoroughly clean the application area, if there anything else I should be concerned about?