Dyno day results

[dredd2099]

haven scanned mine yet
but here\'s the overall results for everyone
listing their best run

Temp: 23 degrees

P5Dude (03/5spd/Mazda Protege 5)
not too happy either
hp: 111.8
tq: 121.6
mods: Injen CAI, exhaust, header, 1 Cat Conv taken out

http://img59.photobucket.com/albums/v179/Carish_02/110_1016.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1022.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1018.jpg

Tekkie (03/5spd/Mazdaspeed Protege)
disappointed as well (hello new exhaust and piggyback ecu)
hp: 148.3
tq: 176.8
mods: ION FMIC, Injen CAI, AWR motor mounts, Apexi AVC-R, Blitz DTT

http://img59.photobucket.com/albums/v179/Carish_02/110_1006.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1010.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1004.jpg

Xenon (05/Auto/Mazda 3 sport GT)
hp: 128.8
tq: 127.4
mods: stock

http://img59.photobucket.com/albums/v179/Carish_02/110_1050.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1051.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1065.jpg

Suds (03/Auto/Matrix XRS)
oh f@#$%g auto...
hp: 144.8
tq: 104.7
mods: Injen CAI, ground wires
*cover in valance to get more air in for the intake taken out

http://img59.photobucket.com/albums/v179/Carish_02/110_1044.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1045.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1047.jpg

Dredd2099 (03/6spd/Matrix)
oh wtf...somewhat disappointed, somethings wrong (check Evilthornes and Badmanas run)
hp: 164.9
tq: 120.0
mods: Injen CAI, Borla exhaust, ground wires

Badmana (03/6spd/Matrix)
yay, stock exhaust is good...
hp: 165.4
tq: 119.8
mods: Injen CAI

http://img59.photobucket.com/albums/v179/Carish_02/110_1031.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1033.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1030.jpg

Evilthorne (04/6spd/Matrix)
all grins after
hp: 166.8
tq: 122.0
mods: Injen CAI
*cover in valance to get more air in for the intake taken out

http://img59.photobucket.com/albums/v179/Carish_02/110_1041.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1040.jpg

http://img59.photobucket.com/albums/v179/Carish_02/110_1039.jpg



pixies will be upped later on
thanks to every1 that went
and to Mel at TAG racecraft

[Xenon]

I got a 20 second video of my tach and speedo going up during the dyno test... I\'ll try to upload it somewhere... it\'s fun to watch. My car apprently maxes out at 188, as stated in the handbook.

[MZ3_GS]

Hey Xenon, when did you hang with the Trix Krew? :p

[profusion]

Hey thats cool.. were did you dyno? how much was it? I wouldnt mind seeing what mine can do.. :p

[Xenon]

Originally posted by MZ3_GS


Hey Xenon, when did you hang with the Trix Krew? :p

dredd actually called me. And the dyno facility was literally a block from my house... so I figured why not?

[david3]

Was that at TAG?

[Xenon]

Yes, it was at TAG

[profusion]

Originally posted by profusion


Hey thats cool.. were did you dyno? how much was it? I wouldnt mind seeing what mine can do.. :p

Can someone answer my question please =)

[david3]

Check this out http://www.tagracecraft.com/Tag_services.html that\'s where they got it done..

I think it\'s like $75 for 3 pulls or $130 for a full hour unlimited pulls.

[dredd2099]

we might do another run at the dyno
lemme know if ur interested mr profusion
no exact date and times yet
its just being floated around
:)

[///M]

I\'m interested in doing a dyno.

[MazdaTree]

are there any dynos in brampton or mississauga?
and yes all mazda have a speed limiter that doesnt make it fo further than 188 i hit it on the 403

[firstmazda]

What happens at 188km/h?
does the engine cut out?
does it just stop accellerating but the enging keeps revving?

and is it true you can stall the engine if you go too far past redline?
(in manual mode on the AT)


Ray

[MazdaTree]

well wit me i felt the kick almost wit the car then i noticed i was goin 188 so i slowed down and i was in auto not auto manual

[MajesticBlueNTO]

Originally posted by firstmazda


What happens at 188km/h?
does the engine cut out?
does it just stop accellerating but the enging keeps revving?

and is it true you can stall the engine if you go too far past redline?
(in manual mode on the AT)


Ray

fuel cut...the ecu stops the flow of fuel to the engine so it will \"die\" for a split second and the rpms and speed will drop. once the speed falls below 188km/h, the fuel will kick back in and the car will accelerate again.

if you keep your foot planted while doing this, your car will jolt as it \"dies\" and comes back.

i\'ve never driven an AT 3 but i do know in other cars that if you hit redline while holding the shifter in a lower gear other than D (i.e. 2 in the P-R-N-D-2-1 pattern) the \"rev limiter\" will kick in. with all the computers in an automatic tranny these days, you can\'t over rev the engine while downshifting...the computer will only shift into the gear when it is safe to do so (i.e. going into 1 from D at 120km/h).

[MAZDA3_MIKE]

its sucks when you hit 188 which usally = being passed . yeah the car shuts down , but you can keep it around 185-188 if your light on the gas . not that i would know i never driven that fast :sarc Come on cosworth racing i want my d power kits now i cant wait .