PDA

View Full Version : Klutch SL5 Wheels 18x9.5 et 20



MissJaeeee
12-07-2014, 06:26 PM
Hey Everyone,

just want to say I'm new to the forum.

I just picked up new wheels for next year Klutch SL5 wheels they are 18x9.5 and have a et 20 offset.

My Question is I already know parts of it, I know I'll need to roll my fenders to make these fit, I'm not super low just on lowering springs. Just want to know what size tires I should put on them 225/40/18 ? shouldn't have to aggressive stretch. Any other advice would be great.

Here are also pictures of the car and the wheels.

https://farm6.staticflickr.com/5615/15682015586_6113b68d3a_b.jpg (https://flic.kr/p/pTLqT5)IMG_9563 (https://flic.kr/p/pTLqT5) by R32_Danny (https://www.flickr.com/people/78139571@N04/), on Flickr

https://farm8.staticflickr.com/7542/15705719595_d68f777cc3_b.jpg (https://flic.kr/p/pVRVfT)IMG_9582 (https://flic.kr/p/pVRVfT) by R32_Danny (https://www.flickr.com/people/78139571@N04/), on Flickr

https://farm8.staticflickr.com/7475/15086361033_6ce61a692d_b.jpg (https://flic.kr/p/oZ8xwZ)IMG_9585 (https://flic.kr/p/oZ8xwZ) by R32_Danny (https://www.flickr.com/people/78139571@N04/), on Flickr


The wheels :)

https://farm6.staticflickr.com/5569/14721891210_5d2e327d65_b.jpg

https://farm6.staticflickr.com/5562/14908207662_d37b3e9baf_b.jpg

https://farm4.staticflickr.com/3842/14722004557_6eaf0fc8cb_b.jpg

S.F.W.
12-07-2014, 06:56 PM
9.5" Wide +20 offset, wow..you are going to need a full roll, and significant camber to make that fit.

FD22
12-07-2014, 06:59 PM
Hmm I totally know you from IG ;) haha welcome to the boards finally!

Like S.F.W. mentioned, you'll definitely need some fender work, and although you may not want too much of a stretch, you're likely going to need it to make those fit/look nice. I had similar specs (except +25 offset) this past summer and had to stretch 215/35/18 onto them to make the whole setup work.

Dave_The_BMXER
12-07-2014, 10:37 PM
Yeah, those won't really fit with 225s.

These are 215

http://i967.photobucket.com/albums/ae152/blkimmell/jepg3noedit_zpsb2f3077a.jpg
http://i967.photobucket.com/albums/ae152/blkimmell/DSC00381_zpsabd6df0c.jpg

Hyperion
12-07-2014, 11:04 PM
215/35/18 is going to be needed. -4 camber in the rear, max possible out of a set of bc coils in the front. Fairly large roll in both the front and back. Going to need camber arms for the rear.
I'm sure someone will pop up sooner or later who is able to help you fit it all on your car who also has a fender roller.

schmat66
12-07-2014, 11:55 PM
Yeah I have a roller on route should be arriving this week :)

Welcome to the board finally haha,

Like everyone above has said,

planning on going coils?

that will depend on a 215/35 or 215/40 or 205/40

Dave_The_BMXER
12-08-2014, 08:23 AM
215/35/18 is going to be needed. -4 camber in the rear, max possible out of a set of bc coils in the front. Fairly large roll in both the front and back. Going to need camber arms for the rear.
I'm sure someone will pop up sooner or later who is able to help you fit it all on your car who also has a fender roller.

Dude with car I posted claims his front fenders were untouched.

Hyperion
12-08-2014, 08:24 AM
Dude with car I posted claims his front fenders were untouched.
Maybe, but his liners were either removed or torn to shreds.

FD22
12-08-2014, 11:13 AM
Dude with car I posted claims his front fenders were untouched.


Maybe, but his liners were either removed or torn to shreds.
It's also a Speed, thus tiny more room to work with, with those front fenders. As opposed to OP's sedan.

Dave_The_BMXER
12-08-2014, 11:21 AM
I plan to exploit that little bit of fender excess.

schmat66
12-08-2014, 12:59 PM
I plan to exploit that little bit of fender excess.

i like your train of thought