Factory rim size

[Kager]

i did some search on this topic and found nothing, so here it goes

I want to know what\'s the factory rim size? offset?
and I have a set of 19\" wheels from my previous car, they are RO_JA Montegi FF5 wheels, the size is 5x100, 5x4.5 37mm offset, just wondering if this set of wheels will fit on M3? any help is appreciated~

[majic]

RedRaptor mentioned it here (http://www.msprotege.com/forum/showthread.php?t=91568)



Stock 17\" Mazda3 Wheels-
Specifications:
Diameter: 17\"
Width: 6 1/2\"
Offset: 52.5 millimeters
Bolt pattern: 5 x 114.3
Finish: Silver


37mm is almost 2cm of difference especially with them being 19s and i hope what you listed was a dual bolt pattern 5x114.3mm = 5x4.5\"

[Kager]

the sheet says 5x100&5x4.5, I don\'t really know what that means~

so the stock rims are 52.5mm offset? then i don\'t think my wheels will fit on M3 eh?

[majic]

do you see 10 different bolt holes?

4.5\" x 2.54 = 114.3mm so yah.. they should fit but talking about offset in the linq someone said u shouldn\'t use < 45 offset.. then again, you may try and see for yourslef (i dunno how wide the rim is - that\'s another factor)

[Kager]

the sheet says \"backside setting\" and I am assuming that\'s the width?
it says 5 5/8.

[majic]

can\'t be.. on a 19\"!!!???

our stock rims are 6.5\" and 18s and 19s are ususally 7-8\"

[Kager]

mmm..i don\'t know~ but it says 5 5/8 on the sheet...lol
nevermind...i will go to a shop and give it a try..thanks Majic