Simota CBII-658 CEL error
Hi guys, anyone here have like me CAI Simota Intake model CBII-658 for Mazda 3, 2.5l...
My car is exact : M3, no speed, Gs, 2010, 5 doors, 2.5l...
I just install my CAI april 2014, no problem no CEL.. but since few weeks... i have CEL light up ... someday CEL is ON, and some is OFF...
I try many things Clean MAF and TBody with CRC product... but still the same... i can go 5 days without CEL... but after that CEL back ON.. 2-3 days... and goes OFF... and again, and again..
So im asking you guys, if someone here have this type of product with this Simota Intake CBII-658... i love it... but since CEL flash ON/Off depend on wich day... it's turn me crazy...
Thanks for your time and help i really appreciate...
.
see-a
Re: Simota CBII-658 CEL error
oups! think post in wrong section... admin! move-it if you can ... thanks.. (sorry!)
Re: Simota CBII-658 CEL error
have you tried to use a obd2 reader to read the code? it could have nothing to do with the intake you never know
Re: Simota CBII-658 CEL error
Quote:
Originally Posted by
Girds
have you tried to use a obd2 reader to read the code? it could have nothing to do with the intake you never know
Thanks @Girds fastreply ;-)... yep i just order my OBDScan/ELM327 but still not receive it... but friend of my have is Scanner and i run it to my car and get P0171 (only this code, no other, no more)
Re: Simota CBII-658 CEL error
Quote:
Originally Posted by
Girds
have you tried to use a obd2 reader to read the code? it could have nothing to do with the intake you never know
Thanks @Girds fastreply ;-)... yep i just order my OBDScan/ELM327 but still not receive it... but friend of my have is Scanner and i run it to my car and get P0171 (only this code, no other, no more)
Re: Simota CBII-658 CEL error
Thanks @Girds fastreply ;-)... yep i just order my OBDScan/ELM327 but still not receive it... but friend of my have is Scanner and i run it to my car and get P0171 (only this code, no other, no more)
Re: Simota CBII-658 CEL error
i dont have the same brand of cai but i am experiencing the same p0171 as you . i got it after i cleaned the filter , maf sensor , and the tb. it means you are getting un metered air into your engine somewhere after the maf sensor or ur not getting enough fuel . i have been trying to track down and fix the problem or a few weeks. most likely causes are a vacuum leak (a small hole somewhere or bad connection) , a bad or dirty maf sensor , a bad o2 sensor , faulty pcv valve, improperly installed aftermarket air intake,dirty fuel filter or bad fuel pump. i ending up replacing maf o rings and then later maf sensor itself that didnot fix the problem . make sure you inspect everything you touched carefully, maybe even take cai apart and reassemble. do you notice any performance issues with the car (jerky accel or decel? or rough idle?)