PARTS DEPARTMENT

:)Hello to all the TM3 members from the Parts Department @ 401 Dixie Mazda!:D

My name is Tony (401DIXIETONY), Parts Manager, and I have 2 other members that's part of the team and they're Jim and Marvin. We're happy to be part of the TM3 and it's always exciting creating new relationships, new families, and of course new faces! Whether it's a part or an accessory or even a simple question, we'll try our BEST to assist you in anyway possible! I'll be looking forward to see some of the members at the 3 MEET SHOW AND SHINE on August 15th at 401 DIXIE MAZDA!

Is Dixie Mazda offering any TM3 member discounts ?

Hey mazdaagain,

To your question, we are offering discounts for all TM3 members with a 20% off all parts when purchased through the parts retail counter (except tires which is 10% off.) Come on in and try us out! We're open to offer outstanding service and to better your overall dealership experience!

@401DIXIETONY it was nice meeting you in person this past Saturday.didnt realize you were so much into bikes as well.look forward to chatting with you at future events.you should come out to the monthly monday meets since they are held just down the street from you by dixie and eglington.

@Shizuka_Osamu I appreciate you making it out for the 3 Meet and definitely looking forward to future chats during your dealer visits or even future meets. Yeah, I like 2 wheels as much as 4 wheels haha the adrenaline is there! Tell me more about the monthly Monday meets at Dixie and eglinton... What time is that and dates? Is It every Monday?

They're monthly meets called 'massiv' Mondays held and the Timmies/Staples plaza over at aimco drive/street. Usually when a meet is going to happen and thread will be created a couple weeks before the date.

Just picked up rain visors and oem oil filters, even though dealership is 35-40 minutes away i will always go here for parts thanks again

@401DIXIETONY as jay93 mentioned its pretty close by to you.location is the parking lot area to the left of staples just down the street from you towards eglington.it happens once a month.normally pogi or one of the other moderators will post up the thread a week before hand.its not just for mazda3s to attend but of course the majority will be mazda.the thread is always posted in the mini meet section under masiv monday.

Quote:

---

Originally Posted by 401DIXIETONY

@Shizuka_Osamu I appreciate you making it out for the 3 Meet and definitely looking forward to future chats during your dealer visits or even future meets. Yeah, I like 2 wheels as much as 4 wheels haha the adrenaline is there! Tell me more about the monthly Monday meets at Dixie and eglinton... What time is that and dates? Is It every Monday?

---

Quote:

---

Originally Posted by jay93

They're monthly meets called 'massiv' Mondays held and the Timmies/Staples plaza over at aimco drive/street. Usually when a meet is going to happen and thread will be created a couple weeks before the date.

---

@401DIXIETONY I'm looking to get window visors for my wife's 2012 Mazda5. The JDM style (slim version) if possible.
Is this something you are able to obtain? @FLIPDADY use to get these before through MoT, but I don't know the backend logistics.

Went by on Monday to pickup a Thermostat and Fluid...
Just make sure you can prove you're an active member by showing them you have a TM3 plate or apparel...
Nice meeting Tony from parts dept!

Picked up an oil filter today from Tony. Good experience and will continue to go to him for my parts needs.

@401DIXIETONY

Hey buddy. Can you please provide me a quote for the driver's side sideview mirror cover/cap?
It got cracked. The assembly is fine; it's just that plastic cover that got cracked.

2012 Mazda5 GT

@401DIXIETONY

I have the blank key with transponder chip, just need it cut and coded. Could i please get a quote for that? I only have 1 key. Will it be a clone of that? or will it be a unique 2nd key allowing me to code my own third key if need be. reason asking is per the instructions with coding a 3rd key here. I have no problem paying for the first key to be cut and coded, but if possible, it'd be beneficial to be able to make more as my wife has already lost a key.

dealerships local to me were either unhelpful or confused about the process so i'd rather not deal with them and would rather drive back to Toronto and deal with a TM3 affiliate

Quote:

---

Originally Posted by ryan2.3

@401DIXIETONY

I have the blank key with transponder chip, just need it cut and coded. Could i please get a quote for that? I only have 1 key. Will it be a clone of that? or will it be a unique 2nd key allowing me to code my own third key if need be. reason asking is per the instructions with coding a 3rd key here. I have no problem paying for the first key to be cut and coded, but if possible, it'd be beneficial to be able to make more as my wife has already lost a key.

dealerships local to me were either unhelpful or confused about the process so i'd rather not deal with them and would rather drive back to Toronto and deal with a TM3 affiliate

---

@ryan2.3
I was at the dealership last week and speaking with Tony he hasn't been online as much as he would like to (a few internal changes at their dealership). For a quicker response probably best to call the Parts Department and ask for him directly.

Quote:

---

Originally Posted by p-o-g-i

@ryan2.3
I was at the dealership last week and speaking with Tony he hasn't been online as much as he would like to (a few internal changes at their dealership). For a quicker response probably best to call the Parts Department and ask for him directly.

---

Thanks, will do

Sent from my One+ X