Random MS3 Chat Thread

Printable View

Show 40 post(s) from this thread on one page

02-21-2013, 11:47 PM
rzapata

Re: Random MS3 Chat Thread

Quote:

Originally Posted by pwdunmore

No way I'm selling that car unless I have to. I have been thinking of upgrading to AWD in the future though. FWD in the winter is good but AWD would be awesome for when the snow banks are 2 ft high. Good news is my project is suppose to end April so snow will be gone and I can rip it in the speed again with summer tires :)

How you liking the land of ice and snow (although there's not much snow)? :chuckle

What project is this if you don't mind me asking?
02-22-2013, 10:36 AM
pwdunmore

Re: Random MS3 Chat Thread

I work for Hatch and right now I am working on a CNRL project designing a process plant. The site is about an hour past fort mcmurray so thats gonna be a fun site visit... lol
02-22-2013, 02:45 PM
rzapata

Re: Random MS3 Chat Thread

Quote:

Originally Posted by pwdunmore

I work for Hatch and right now I am working on a CNRL project designing a process plant. The site is about an hour past fort mcmurray so thats gonna be a fun site visit... lol

Nice, Fort McMurray is the real land of ice and snow. :chuckle

I know a few guys who work at Hatch in GTA. They're in the transportation division.

Should have brought the speed with you. Would have been fun to test it out in this craziness. :chuckle
02-22-2013, 03:45 PM
Lockdown

Re: Random MS3 Chat Thread

I don't envy you out there. Plug the rental car in when/where you can.

I have to go back out there in a month or so for a few dozen installs and I'm not looking forward to it or the rental.
02-22-2013, 04:43 PM
rzapata

Re: Random MS3 Chat Thread

Quote:

Originally Posted by Lockdown

I don't envy you out there. Plug the rental car in when/where you can.

I have to go back out there in a month or so for a few dozen installs and I'm not looking forward to it or the rental.

You got connections here? Where abouts?
02-22-2013, 04:53 PM
Lockdown

Re: Random MS3 Chat Thread

Quote:

Originally Posted by rzapata

You got connections here? Where abouts?

Connections? What is it that you need? I haven't checked what company the installs will be for but it's usually an on site job, sleep, back on site, etc until it's done then off to Edmonton and home. Don't really hang out, just work and sleep
02-22-2013, 06:04 PM
pwdunmore

Re: Random MS3 Chat Thread

Quote:

Originally Posted by rzapata

Nice, Fort McMurray is the real land of ice and snow. :chuckle

I know a few guys who work at Hatch in GTA. They're in the transportation division.

Should have brought the speed with you. Would have been fun to test it out in this craziness. :chuckle

Ya that would have been fun bringing the car out but I didn't have the time to drive it out all the way out here cuz I had to start ASAP... I got connections out here but one the good kind :cool lmao

I was told last weeks that I was to be on a plane by tuesday lol... would have had to started driving the moment I knew
02-22-2013, 06:13 PM
rzapata

Re: Random MS3 Chat Thread

Quote:

Originally Posted by Lockdown

Connections? What is it that you need? I haven't checked what company the installs will be for but it's usually an on site job, sleep, back on site, etc until it's done then off to Edmonton and home. Don't really hang out, just work and sleep

I don't know yet. But if you're headed this way, I might as well get some stuff. I'll let you know before you head down if that's ok.
02-22-2013, 09:00 PM
Elusivellama

Re: Random MS3 Chat Thread

http://i853.photobucket.com/albums/a...ps22381940.jpg

McCafe double double anyone?

http://i853.photobucket.com/albums/a...ps77f63f3b.jpg

Only the freshest OCC beans are roasted and ground for this delicious treat.
02-27-2013, 04:34 PM
Jsquared

Re: Random MS3 Chat Thread

Quote:

Originally Posted by pwdunmore

I work for Hatch and right now I am working on a CNRL project designing a process plant. The site is about an hour past fort mcmurray so thats gonna be a fun site visit... lol

Thread crap for one second....

Do you happen to know Betty Lin? I use to work with her and she is also at Hatch these days. Sry guys. carry on.
02-28-2013, 05:38 AM
boyracer

Re: Random MS3 Chat Thread

@ 5_Alive, I would at least change the RMM. Yesterday Sure was dropped as a Vendor on MSF (Mazdaspeed Forums). It was believed they were knowingly selling unsafe products (with very little R&D), they will not replace those products, & they stopped responding to people. Ive seen a picture of a sure RRM and it looked like Godzilla chewed it up and spat it out.

remember this http://www.torontomazda3.ca/forum/sh...-your-own-risk

Here is the MSF thread regarding all the known problems http://www.mazdaspeedforums.org/foru...enises-137822/
02-28-2013, 01:18 PM
5_Alive

Re: Random MS3 Chat Thread

I have nothing except the RMM I may worry about.
The rest of the stuff I have installed is completely copy catted from everyone else. Can they F up the sts that bad???

I dont see any damage to it or around the rmm..
02-28-2013, 02:53 PM
boyracer

Re: Random MS3 Chat Thread

Quote:

Originally Posted by 5_Alive

I have nothing except the RMM I may worry about.
The rest of the stuff I have installed is completely copy catted from everyone else. Can they F up the sts that bad???

I dont see any damage to it or around the rmm..

How long have you had it on? When the warmer weather comes (sometime in spring) take it out & have a look at it.
02-28-2013, 04:13 PM
standsideways

Re: Random MS3 Chat Thread

Quote:

Originally Posted by 5_Alive

I have nothing except the RMM I may worry about.
The rest of the stuff I have installed is completely copy catted from everyone else. Can they F up the sts that bad???

I dont see any damage to it or around the rmm..

watch the bushing, listen for knocking. there have been multiple failed SURE RMM's, along with everything else they make that fails.
02-28-2013, 07:00 PM
5_Alive

Re: Random MS3 Chat Thread

Sounds like another medieval parts company.

I've had the mount installed for around 3-4 months.

I'm not positive the ssp and counter weight eill fail to be completely honest..
But I'll keep my eyes on the rmm..
02-28-2013, 07:23 PM
Mr Wilson

Re: Random MS3 Chat Thread

I'm running their ssp and weight too. Not too worried about them (actually quite like them).

Just happy I didn't buy some of their other stuff.
02-28-2013, 07:58 PM
Fack_Dude

Re: Random MS3 Chat Thread

Quote:

Originally Posted by Mr Wilson

I'm running their ssp and weight too. Not too worried about them (actually quite like them).

Just happy I didn't buy some of their other stuff.

Ninja edit.
02-28-2013, 08:28 PM
Mr Wilson

Re: Random MS3 Chat Thread

Small turbo bro, 260 wheel horsepower

hahaha ;)
02-28-2013, 08:35 PM
CelestSpeed3

Re: Random MS3 Chat Thread

Happy you didn't buy there camber arms . . . .
02-28-2013, 09:49 PM
loki

Re: Random MS3 Chat Thread

Or their seals
02-28-2013, 09:50 PM
loki

Re: Random MS3 Chat Thread

In fact, just sell your speed
02-28-2013, 11:34 PM
5_Alive

Re: Random MS3 Chat Thread

Quote:

Originally Posted by loki

In fact, just sell your speed

And replace it with a....

Smart car.. :chuckle
03-01-2013, 12:20 AM
Fack_Dude

Re: Random MS3 Chat Thread

Quote:

Originally Posted by 5_Alive

And replace it with a....

Smart car.. :chuckle

Fack that. buy a bus pass.
03-01-2013, 11:23 AM
pwdunmore

Re: Random MS3 Chat Thread

Quote:

Originally Posted by Jsquared

Thread crap for one second....

Do you happen to know Betty Lin? I use to work with her and she is also at Hatch these days. Sry guys. carry on.

Haven't met her yet but the company is huge so maybe one day I will run into her if she is still with Hatch.
03-08-2013, 07:50 AM
loki

Re: Random MS3 Chat Thread

Pulled up behind a beige corolla last night heading up Pape on the way home.

Was only behind the corolla for 20 seconds when they pulled off to the side of the road to let me pass.

Jokes

Show 40 post(s) from this thread on one page