link the GB here
Printable View
link the GB here
GB thread posted here: http://www.torontomazda3.ca/forum/sh...-DIY-Tow-Plate
Ah S.F.W. just mentioned on the GB that you have a gen1 so the M20 won't fit. Not sure if you'll have any luck at a local hardware store finding M16 (I think that's what EastYork3 said his '09 is).Quote:
Originally Posted by cSPEED
Iv been sitting here at work making a jig to easly bend out the material. But I have yet to get the nice bend you have going on. I feel like I have to much time on my hands to be doing this at work lol.
Btw, all you GTA guys, if you want to get a bolt either for gen1 or gen2, there is one place I know of, it's Brafasco on Jane and Langstaff in Vaughan. That's where I got mine from. Home Hardware has the size but only Imperial. Home depot doesn't have shit.
To warm you, I bought a 6 inch M16 bolt and it cost me $20. But it's coated in yellow zinc so it won't rust. $20 isn't so bad considering rhoplate and the like charge around 80
Are you still able to make these plates??