I am thinking the HTP 1 peice 3inch...but...dont want to go with a 51R battery, or a smaller tray.
Printable View
I am thinking the HTP 1 peice 3inch...but...dont want to go with a 51R battery, or a smaller tray.
Corksport fits without modification...just remove ECU cover.
I talked with HTP and they said you could run their 3.5" intake on the Gen 2 speed3 by just relocating the ECU on top of the fuse box. Easy shit and now you'll have a SICK intake.Quote:
Originally Posted by starscream
I plan on running the JBR or HTP 3.5" intake if I get the GT2871 turbo I have my sights on.
Corksport intake is tinyQuote:
Originally Posted by SomeGuy
So if yours...Quote:
Originally Posted by loki
that makes no sense...Quote:
Originally Posted by SomeGuy
so is yours*
its 3.5" vs. 2" which is the corksportQuote:
Originally Posted by SomeGuy
let me rephrase, the corksport is not tiny, but is too small for an upgraded turbo application
for the K04, the corksport is probably the better intake out there, at least I found it had less issues with leaks
Corksport has a true 3" ID intake for the MS3...I was not referring to their standard size intakes.Quote:
Originally Posted by loki
http://www.corksport.com/corksport-p...-3-intake.html
well it does not look like they offer it with the step-up silicone piece for the 4inch turbo intake side, only a step down to 1.75" for the stock K04Quote:
Originally Posted by SomeGuy
SU all the way
Because a $10 coupler is hard to find? He was looking for an intake that doesn't need a 51r or relocated ECU, so it is an option.Quote:
Originally Posted by loki
Also, he said Beaner...so the S3, what's the inlet size on it? Isn't it stock size?
You dont need to get so worked up if I am giving my opinion on corksport
If you want to offer a larger intake with the modded speed in mind there should be an option for larger coupler when you purchase. Not whether or not a coupler is hard to find or not.
For what its worth, my intake fits with the stock battery in place with the ecu moved. I believe @fywdyl kept the stock battery. I think on the corksport website it said you had to move the ecu...but I could be wrong/misread
Bnr I believe uses all the original k04 housing
Polish Eagle mentioned gt2871 which had 4 inch intake
No dice if you have gen1
** 07-09 Mazdaspeed 3 and Mazdaspeed 6 must make ecu or battery modifications for fitment.
** Does not fit with CorkSport cold air box.
** This system is not CARB approved..
Not getting worked up at all lol relax grumpy cat.
2nd gen we get lucky but ya, ECU relocate is the easy option.
Corksport blows goats.Quote:
Originally Posted by loki
JBR WP aluminum one, stock battery, ECU moved.Quote:
Originally Posted by loki
The newer S3v2 is 2.5 inches from what I gather, and the housings are all done up inhouse, compressor and exhaust. No more reusing the stock stuff at all.Quote:
Originally Posted by SomeGuy
When ordering HTP, one of the options they give you is the coupler size for the BNR.
By the way, any one want my BNR?
What plans now @boyracer?
Or just going back k04?
Hell NoQuote:
Originally Posted by boyracer
GTX2867Quote:
Originally Posted by loki
Fer serious?
Not everyone is a bitch like youQuote:
Originally Posted by Mr Wilson