-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
shift8
Anything pending? Get a cheap ODBII dongle and install Torque (or other ODB readers). Totally worth it.
Already got me self an OBD2 scanner. No dice, o2 sensor may be pooched.
I did flash a map, but I left the stock cel codes checked off, could that be it? Just wanted to make sure before ordering the parts.
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
fywdyl
Already got me self an OBD2 scanner. No dice, o2 sensor may be pooched.
I did flash a map, but I left the stock cel codes checked off, could that be it? Just wanted to make sure before ordering the parts.
Just go for a drive and it'll come back. When I was debugging mine I could clear the CEL and it'd come back within 30km.
Edit: also the car was kinda bogging down and just generally not running right.
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
shift8
Just go for a drive and it'll come back. When I was debugging mine I could clear the CEL and it'd come back within 30km.
Edit: also the car was kinda bogging down and just generally not running right.
Sorry, that's not what I meant. I don't have any CELs right now, but in ATR these codes are unchecked by default:
P0030, P0420, P0456, P0607, P260F, U0101
My question is, would any of those impact the readiness monitors for O2 or EVAP?
-
Re: Random MS3 Chat Thread
I had no issues
Sent from my iPhone using Tapatalk
-
Re: Random MS3 Chat Thread
My Mazda 3 was able to pass emissions with the evap system not ready. Was ok providing I wasn't selling the car. Evap is temperature based. When it's colder out your evap recirc system isn't normally being used.
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
Como
My Mazda 3 was able to pass emissions with the evap system not ready. Was ok providing I wasn't selling the car. Evap is temperature based. When it's colder out your evap recirc system isn't normally being used.
1 not ready is OK, 2 not ready is a fail.
-
Re: Random MS3 Chat Thread
Mines getting the test on Saturday.
We'll see how it goes with no butterflies in the intake and the EGR blocked off.
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
Mr Wilson
Mines getting the test on Saturday.
We'll see how it goes with no butterflies in the intake and the EGR blocked off.
Oh you're screwed lol
-
Re: Random MS3 Chat Thread
Hahaha just don't care at this point. Give me a conditional and I'll deal with it later in the year.
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
Mr Wilson
Hahaha just don't care at this point. Give me a conditional and I'll deal with it later in the year.
EGR block off can pass. Have mine disabled via tune (CEL delete :)). No idea about butterfly valve.
Sent from my A0001 using Tapatalk
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
Mr Wilson
Hahaha just don't care at this point. Give me a conditional and I'll deal with it later in the year.
I like your thinking.
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
Mr Wilson
Mines getting the test on Saturday.
We'll see how it goes with no butterflies in the intake and the EGR blocked off.
you'll pass, just make sure the code for no butterflies is blocked from causing a CEL....same with the EGR.
you will get an EGR Not Ready but are fine if that's the only Not Ready
Sent from my Nexus 6P using Tapatalk
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
MajesticBlueNTO
you'll pass, just make sure the code for no butterflies is blocked from causing a CEL....same with the EGR.
you will get an EGR Not Ready but are fine if that's the only Not Ready
Sent from my Nexus 6P using Tapatalk
This is good to know. I'll be in the same boat
Sent from my D6503 using Tapatalk
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
ricola
This is good to know. I'll be in the same boat
Sent from my D6503 using Tapatalk
Boats don't get etested
Sent from my iPhone using Tapatalk
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
loki
Boats don't get etested
Sent from my iPhone using Tapatalk
They just cost a lot more in gas than the MS3 :)
Sent from my A0001 using Tapatalk
-
Re: Random MS3 Chat Thread
Anyone have a brand new downpipe gasket lying around before I go buy one from the dealership?
I've had a CeL for like 1yr now with running rich at idle
Sent from my iPhone using Tapatalk
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
MajesticBlueNTO
you'll pass, just make sure the code for no butterflies is blocked from causing a CEL....same with the EGR.
you will get an EGR Not Ready but are fine if that's the only Not Ready
Sent from my Nexus 6P using Tapatalk
Giggity
-
Re: Random MS3 Chat Thread
Some kids in a GTi just tried to get me to race them in the city
It's winter, winter tires and it's raining buckets
What's wrong with these people?
Sent from my iPhone using Tapatalk
-
Re: Random MS3 Chat Thread
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
loki
Anyone have a brand new downpipe gasket lying around before I go buy one from the dealership?
I've had a CeL for like 1yr now with running rich at idle
Sent from my iPhone using Tapatalk
I'm guessing P0172?
-
Re: Random MS3 Chat Thread
Jimmy's got the touch. He got my car to pass :headbang
-
Re: Random MS3 Chat Thread
I'm so glad I don't have to worry about this shit any more. lol
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
boyracer
I'm so glad I don't have to worry about this shit any more. lol
And changing gears yourself.
Sent from my iPhone using Tapatalk
-
Re: Random MS3 Chat Thread
@boyracer
Sent from my iPhone using Tapatalk
-
Re: Random MS3 Chat Thread
MajesticBlue was correct. Passed the etest zero issues.