Great Fn work.. Mine next? if so how much? :D
I just wanna blue or black out the chrome in the housings
Maybe white out your fog ring covers to go with the look of these bad boys and white rims
Printable View
Great Fn work.. Mine next? if so how much? :D
I just wanna blue or black out the chrome in the housings
Maybe white out your fog ring covers to go with the look of these bad boys and white rims
I've got a spare set of headlights sitting at home, We should f*ck around with them.Quote:
Originally Posted by CH0SiiN1
I'd probably bake them open, install angel eyes or leds or whatever and paint them for 250 plus expenses. I posted in my FS thread I'm selling headlights with AE installed and they are currently baked open. If you're interested in a fun set of headlights just let me know and I'll help ya out. If you just want to do it yourself feel free to ask for help or any questions. It didn't go perfectly but its gotten a lot better. Learned a lot. I've baked 4 sets of headlights now. All success woo. And restored two sets of headlights fairly well.
Thanks for all the compliments I plan on doing the fog light rings white! :) As well as some other random things :)
-D
Some Night Pics. I'll post some evening pics later when I get the eyelids and everything on. :)
The three rings, on the left like it should be vs. the two on the right where the one isn't working...
2x2
http://i1241.photobucket.com/albums/...ps6693ca2f.jpg
3x2
http://i1241.photobucket.com/albums/...psffc7316f.jpg
Now the good photos!! I'm running the inside and outside ring and the projector and fogs.
Just the rings...
http://i1241.photobucket.com/albums/...psd6fc98db.jpg
http://i1241.photobucket.com/albums/...ps3cdf94a2.jpg
http://i1241.photobucket.com/albums/...ps692111ae.jpg
Rings, Days, and Fogs
http://i1241.photobucket.com/albums/...psa3c19c31.jpg
http://i1241.photobucket.com/albums/...psf9efe79c.jpg
http://i1241.photobucket.com/albums/...psd36d2c3a.jpg
http://i1241.photobucket.com/albums/...ps7464998e.jpg
Close Up
http://i1241.photobucket.com/albums/...psc3e13298.jpg
http://i1241.photobucket.com/albums/...ps01f60a8e.jpg
Just Projector and Parking Light
http://i1241.photobucket.com/albums/...pse43f859a.jpg
Output Line Now that I have The Clear Lenses (Shitty Pic)
http://i1241.photobucket.com/albums/...pscd502906.jpg
DRL Setup, Outside Rings, and Projector... you can also see in this photo the blue behind the projector that I painted~!! :)
http://i1241.photobucket.com/albums/...ps9040d799.jpg
That's it for now! Hope ya like it. Cars being lowered next week another half inch ! Spacers, and extended lugs too.
-D
wow... :thumbsup
Great work man.
I approve.
+1Quote:
Originally Posted by JrCanuck
Looks like you did some nice work!! love the look of white housing on there own but find it really hard to like when they are installed. Might just be too far from the norm for me.
Ya I can understand that. I thought about doing body colour (winning blue mica) housing to make it smoother and more oem. It was a tough decision but in the end I wanted something a little more daring. :) I appreciate the feedback! :)Quote:
Originally Posted by JBale
-D
Thanks Guys!Quote:
Originally Posted by CH0SiiN1
Thanks !Quote:
Originally Posted by FD22
Thanks Rob! :) I hope so. At least I hope it's for the right reasons :)Quote:
Originally Posted by Rob23
Thanks ToM!!Quote:
Originally Posted by -ToM-
Thanks Jackal! I did! and I will take some more (late evening) pics when all 6 are functional :rantQuote:
Originally Posted by Jackal
Quote:
Originally Posted by Rob23
Thanks guys I appreciate the feedback and excitement. Hopefully the all 6 angel eyes will be up and running so you can see how it looks!!Quote:
Originally Posted by JrCanuck
Thanks for all the wonderful positive feedback everyone makes it exciting to post pics and do mods when people are excited with you!
That looks awesome. Great job. I wouldn't have the courage to do anything like this.
Great night shots! Really shows how bright the angel eyes are and how unique this setup is. Hope you can get that other one going soon.
Thanks! Well if you ever want to attempt it let me know and if I can help in any way I will!Quote:
Originally Posted by 6strings
Ya they are! I bought the ebay ones that are supposed to be identical to the orion V2's but contain the relay and the turnsignal light. The output is great. Actually makes a big difference. I appreciate the kind words :) and I hope so too.Quote:
Originally Posted by Jackal
Looks F*cking awesome dude. The white housing goes so nicely with the winning blue.
Do you remember how much the spray can was from Paint Circuit Autobody Supply?
I got Winning Blue, CWP, Clear Coat, and Adhesion Promoter for like 70 dollars from Kris. It was just a deal he was doing before he moved though I'm not sure what the price is normally. I ended up just using a plastic primer for the base coats though, 5 bucks at CT.Quote:
Originally Posted by EastYork3
Thanks! :)
can't wait for springs and spacers and next weeks install!! Pumppppped
What paint did you use on your interior headlights?
Winning Blue And Pearl White with clear on top
Sorry, meant what brand and what not.
What prep steps did you take?
Du Pont. I took a picture of the can on the first page of this thread.
I scuffed them, all of them including the chrome rings and then took them outside to my little corner that I seal as best I can to prevent things like wind/dust./dirt from affecting it. I then applied a thin coat of adhesion promoter (Spray can), waited an hour and then scuffed again lightly and applied another layer of adhesion promoter.Always cleaning with rubbing alcohol before spraying. At this point it was late in the day so I let them dry all night. I then scuffed just very lightly with 2000 grit the next day and applied a cheap CT primer to all of the objects... super light coats, 4 I think, only waiting 10-15 between coats. At this point it became very clear that without the adhesion promoter the paint wouldn't have stuck. Certain spots where the adhesion promoter hadn't reached did not hold paint well. Unless it was applied extremely lightly it would run. And badly. Twice I had to sand and apply extra layers of primer super thin to make it even.
I then scuffed again with 2000 to get rid of any dust/dirt/what not that was stuck, cleaned with Rubbing Alcohol and applied one coat of pearl white to all the pieces (Just incase the primer didn't get it all and because I wanted a bit of white sparkle. Then for the pieces that were getting blue mica I sprayed 5 very light coats of winning blue and for the white ones I sprayed 5 very light coats of pearl on top of the one I already did. I know some people will think it's too much paint but I do very light coats to maintain an even dispersal and prevent running. Also between each coat I would scuff with 2000 very lightly (probably in vain mostly) to eliminate particles that would get trapped during the drying process (shit still got in there). Then 3 coats of clear coat applied a little heavier and I let it dry for another full day.
That was about it... and when I painted the projector housing I just used painters tape and a used microfiber cloth to keep the area I didn't want sprayed free from paint.
Sorry for the detailed reply. Hope it's helpful! I found what made the biggest difference was having an even coat of primer and making sure to apply light quick moving even coats (more rather than less). TBH I still messed up a lot but I'm getting much better.
Cheers
That's great thanks
Just Some CellPhone Snaps and some pics of the Eonon D5151 Head Unit still haven't figured out what I'm doing with the space where the led's normally go... I have some ideas we shall see... also threw in a picture of my rearview camera working on the unit!
Different Colours With the Colours in my Car
http://i1241.photobucket.com/albums/...psd545ccbb.jpg
http://i1241.photobucket.com/albums/...ps6286d2b6.jpg
http://i1241.photobucket.com/albums/...ps1f231a13.jpg
http://i1241.photobucket.com/albums/...ps733a662f.jpg
http://i1241.photobucket.com/albums/...psbf8fa457.jpg
http://i1241.photobucket.com/albums/...psbf04aa28.jpg
http://i1241.photobucket.com/albums/...ps9837358d.jpg
http://i1241.photobucket.com/albums/...psf0b7d654.jpg
NAV
http://i1241.photobucket.com/albums/...pseaa3ccc0.jpg
Backup Camera vs. What It's Like Trying to Look Backwards
http://i1241.photobucket.com/albums/...ps7fea14a3.jpg
http://i1241.photobucket.com/albums/...ps270f4529.jpg
http://i1241.photobucket.com/albums/...ps5efd27c9.jpg
Other Colours of the Eonon Unit
http://i1241.photobucket.com/albums/...ps4e04a91f.jpg
http://i1241.photobucket.com/albums/...ps33a3a1e5.jpg
Stock Look
http://i1241.photobucket.com/albums/...psdb82da04.jpg
Sorry for the shitty cell pics!
Looking forward to seeing the car with spacers on. Looks great as it is though. Loving the vibrant colours!
Thanks josh! Means a lot coming from you!Quote:
Originally Posted by Josh84