What Did You Do To Your Car Today?

Quote:

---

Originally Posted by matty3

Just replaced my stock rear motor mount with a corksport one. Easy install, I was surprised by how crappy the stock one looks.

With the new Ventus evo 2s I put on yesterday and the new motor mound the car feels awesome. I get the new rmm vibrations now.. but other then that night and day difference.

---

From econobox to racecar!!

Seriously though, it doesn't take much to give it a sportier feel.

Quote:

---

Originally Posted by natspriceless

Today I learned a very valuable lesson in what effort is required to put Ichiba spacers on a gen3. Long story short: the hardware that comes with them needs to be modified to be compatible. While I’m not sure if the difference it made was worth it, the whole experience confirmed for me that impulsive modding always leads to trouble.

Also…loving the Corksport SRI. I abandoned my plan to install it myself…Evolution (in the Keele & Lawerence area) took care of it for me.

---

The CS sri is a nice mod to do. I have the 10mm ichiba spacers and I needed the extra long bolts. Fortunately the shop had them.

http://uploads.tapatalk-cdn.com/2016...1f6b79097a.jpg

http://uploads.tapatalk-cdn.com/2016...c3a5979e43.jpg

Engine and drivetrain swap happened today. Running and no more grinding in the transmission.

https://vimeo.com/159659104

Quote:

---

Originally Posted by natspriceless

Today I learned a very valuable lesson in what effort is required to put Ichiba spacers on a gen3. Long story short: the hardware that comes with them needs to be modified to be compatible. While I’m not sure if the difference it made was worth it, the whole experience confirmed for me that impulsive modding always leads to trouble.

Also…loving the Corksport SRI. I abandoned my plan to install it myself…Evolution (in the Keele & Lawerence area) took care of it for me.

---

Evolution is a good place to have work done!

Was at Altech yesterday for an alignment. Today I had a leak sealed on my exhaust.

Quote:

---

Originally Posted by jonjon72

Was at Altech yesterday for an alignment. Today I had a leak sealed on my exhaust.

---

Where did you get your leak sealed? I think I need to do the same.

10fintec in Thornhill. Anthony is a master welder and fabricator.

I had 3 tickets dropped due to cop not showing up because of my car...does that count?

I recently did ra mud flaps cat back custom exhaust and forge bohttps://scontent-ord1-1.xx.fbcdn.net/hphotosv loving the sound just need to be a bit lower now

Well, in a strange turn of events I ended up having my rear stock springs put back on. Anyone who wants to hear the highly entertaining story, I’ll be telling it tomorrow at Picker Pub Night

Side note: If it wasn’t for @S.F.W. & @thirdgen being supportive and helping me become better educated I don’t think I would have survived the last 4 days. Kudos to you guys; Much appreciated!

http://uploads.tapatalk-cdn.com/2016...fe08b302ed.jpg

Installed the solid RMM from JBR ( holy vibes paired with the 80 PMM )

Also will be doing the BSD this week and TMM will be ordered soon

Quote:

---

Originally Posted by paulabreu

http://uploads.tapatalk-cdn.com/2016...fe08b302ed.jpg

Installed the solid RMM from JBR ( holy vibes paired with the 80 PMM )

Also will be doing the BSD this week and TMM will be ordered soon

---

Whoa! Enjoy.
Solid! A rating of what? 100?[emoji1]
Write up a mini review, when all is done!

Most likely dropping my BNR S4 into my car soon.. weather permitting of course. Will most likely create a "My Ride" thread :D

Quote:

---

Originally Posted by paulabreu

http://uploads.tapatalk-cdn.com/2016...fe08b302ed.jpg

Installed the solid RMM from JBR ( holy vibes paired with the 80 PMM )

Also will be doing the BSD this week and TMM will be ordered soon

---

you will hate your car with the BSD and all those mounts.

rearview mirror becomes useless from all the vibes and be prepared for headaches with all the reverberation inside the cabin.

BSD isn't needed, unless you're also adding an oil pan baffle.

Quote:

---

Originally Posted by MajesticBlueNTO

you will hate your car with the BSD and all those mounts.

rearview mirror becomes useless from all the vibes and be prepared for headaches with all the reverberation inside the cabin.

BSD isn't needed, unless you're also adding an oil pan baffle.

---

Vibes don't bother me at all really, for sure this isn't a mount for everybody as the vibes are insane.

Quote:

---

Originally Posted by paulabreu

Vibes don't bother me at all really, for sure this isn't a mount for everybody as the vibes are insane.

---

PMM gives the worst vibes with the BSD so you should be good, not sure why you went with a solid mount like that through. It may cause the vibrations to loosen up some bolts and panels.

Be careful and make sure your chassis bolts that attached by the RMM do not get loose. You may want to loctite everything now lol...

Summers are going on tomorrow.. snow but oh well

Quote:

---

Originally Posted by paulabreu

Vibes don't bother me at all really, for sure this isn't a mount for everybody as the vibes are insane.

---

you say that now... there is no benefit to the BSD unless you're running an oil pan baffle and you don't need an oil pan baffle unless you're pulling more than 1+G in a long corner

Try the TMM first before the BSD.

Ask @loki and @ryan2.3 what a ms3 with full mounts + BSD sounds and feels like

Quote:

---

Originally Posted by paulabreu

Vibes don't bother me at all really, for sure this isn't a mount for everybody as the vibes are insane.

---

you don't want the balance shaft delete. The car become unbearable.

I can tell you this from driving the track in MBNTO's car. It's not about the vibrations, but rather there is a loud buzz as a result of the deletion.

I had a helmet on the entire time and my head still hurt from being in the the car for a few laps.

@paulabreu

what Loki said, we were only on the track for 15 minutes in that car, and it was really disorienting and hurt my head as well. I can't imagine being in the vehicle longer than that, especially if you plan on driving it day to day

edit
this was an interesting read
http://www.jackstransmissions.com/pa...balance-shafts

msf thread where someone did it and gave his tale of caution after a week of use
http://www.mazdaspeedforums.org/foru...en-2-a-100943/

But don't take our word for it

Mbnto only did it because Trini head no good

Quote:

---

Originally Posted by loki

But don't take our word for it

---

So I understand the part of added noise/vibration into the cabin, but beside that, any problems or issues from doing this?

Quote:

---

Originally Posted by paulabreu

So I understand the part of added noise/vibration into the cabin, but beside that, any problems or issues from doing this?

---

what are you trying to achieve by doing this is the real question

Quote:

---

Originally Posted by loki

what are you trying to achieve by doing this is the real question

---

So I guess there's no other problems/issues

Quote:

---

Originally Posted by paulabreu

So I guess there's no other problems/issues

---

Read the 'first' link posted by Ryan2.3 thoroughly, that should give you an idea how stupid it would be to remove a balance shaft. Especially note the part about crankshaft bearings, but it'll do damage to other internal components most definitely, and quickly. Manufacturers place balanced shafts on their engines for a good reason...Specifically engine durability and longevity, not just for customer comfort.

I see no benefit whatsoever, just headaches down the road...Costly headaches.



_3