i got a question for you.. would i need better studs for a 10 or 15mm spacer or are stock good to go?
Printable View
i got a question for you.. would i need better studs for a 10 or 15mm spacer or are stock good to go?
Longer studs for 5mm and up. APH even told me with 5 I would have to check them often.
Love the meaty 255s!
You only get those nice rpf1s look with 9" or more. That's an awesome, awesome setup.
kk thanks dave im thinking ill be going 10 or 15.. i hope studs are crazy moneyQuote:
Originally Posted by Dave_The_BMXER
What are the specs on your current wheels?
Do you know what suspension he's on? Must be real stiff. I don't know if that's "GTA functional".
rpf-1 arent available in that offset in a 9" wheel unless he has 5mm spacersQuote:
Originally Posted by Dave_The_BMXER
Thanks for posting that first shot Dave. I'm actually planning that rear wheel fitment (different tire size though), but hadn't seen much posted like that yet.Quote:
Originally Posted by Dave_The_BMXER
We'll see what it looks like on a sedan! :)
Size: 17x7.5Quote:
Originally Posted by Dave_The_BMXER
Offset: 50mm
Backspacing: 6.27"
Bolt Pattern: 5-114
Weight: 21.0lbs.
Ya your right probably 45's with 5mm spacers.Quote:
Originally Posted by Pereira11
Not sure the suspension, I can try and find out, he is an autox guy so it's probably pretty stiff.Quote:
Originally Posted by prime
People often say our roads are bad and sure they are in some areas but you know that yellow mazda 3? He is from Ukraine and his roads are TERRIBLE and he pulls it off.
Aitch, can't wait
Mazda3forum has over 100 pages of semi flushness and a few good examples
Sedan Love
http://photos-e.ak.fbcdn.net/hphotos..._4529226_n.jpg
http://photos-g.ak.fbcdn.net/hphotos..._6345944_n.jpg
-front 17x9 +40
-rear 17x9 +45
-215/45/17 all around
(I have the mazda thread above open at work and click a new page every time I upload to the ftp server lol (which is a lot).
^ Enkei RPF01's? hmmm !)
sedan looks good could be lower :)
^That car's already been posted earlier on in this thread.
http://www.stanceiseverything.com/wp...1/01/wwyd2.jpg
Mexi flush FTL! (centerbore too small going to modify after I take more measurements with tires off)
lmao dave! love the mexi flush
WORK Equips?Quote:
Originally Posted by Dave_The_BMXER
^ Yessir, in that pic they are basically just sitting on the tip of the lugs due to the cb being off.
So my wheels ended up being 18x8/9 et 38 all around. I am getting them bored out then I am going to run them. In the mean time:
http://farm6.static.flickr.com/5083/...2c3d3d70_b.jpg
http://farm6.static.flickr.com/5207/...c8b82c73_b.jpg
http://farm6.static.flickr.com/5129/...3692f453_b.jpg
ain't scared!
hey dave do you have a link to that thread on M3F about stance? i cant seem to find it..
is this the same one ?
http://www.mazda3forums.com/index.php?topic=141255.2640
gonna sell the monza's after upgrading rims?
^ They were up for sale briefly. Once I confirm work fitment yes they will be for sale again.
Kappa yes same car, different setup.
Before anyone asks, no I am not going to be anywhere near that.
^You say that now.....
Nah dude, I can't deal with this:Quote:
Originally Posted by stevenma188
http://www.youtube.com/watch?v=BwRFdy06JA4
I'm often late so I need to get out of my drive in a hurry.
That dude in the white speed is crazy. That car looks stupid and has zero drivability. He imo over did it this time.
That black speed at the top of this page looks isane. He has both form and function = win.
+1000000000000!!!Quote:
Originally Posted by SSmoked
that is just crazy..i would never go that low and have my rims sticking out that much. i dont even think this is legal in canada.
btw what suspension is he running and does he have a skid plate?
Pure fail.
Phil, no skidplate, he's on BC coil overs with spring springs I am pretty sure. It's basically a custom setup of this and that.
I'd like to see you drive down Finch or any other street full of pot holes and terrible asphalt.
i wouldnt go as far as to call it fail.... true he is super low maybe to low but its not a fail he did what he was trying to do..
Me? That speed 3 isn't my car :) But I'll drive down finchQuote:
Originally Posted by 05Mazda3GT
Lol Michael (owner of slammed ms3) drives that car daily around Houston. Has zero drivability? Not really. It's not really functional or practical, which is true. That's not to say his car never saw the days of function. He's done with his racing days and got bored of his fail wheel drive car.
His old setup did the exact same thing getting out of his driveway lol even with the 350z wheels on it it did the same thing (clip off his bumper).
Love WORK Wheels <3
http://i566.photobucket.com/albums/s...g?t=1296251322
even the cobalt guys are getting into this scene.:(
http://i802.photobucket.com/albums/y...t%202/low1.jpg
http://i802.photobucket.com/albums/y...t%202/low2.jpg
^^ thats not hella flush, thats hella poke.