-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
mikey32235
so with my remote starter at 6am today i started the car from my room, then i noticed after a few seconds it shut off... i tried again, it shut off.. when i went outside to see what was going on, everything looked normal. i got in and started it and it died. so for it to not shut off i had to hold the gas down to about 2500rpm.. until it got a little warm then it stayed on.. my engine light came on shortly after and it said p0300.. random misfire. when it was warmer outside i never had this problem. I'm not sure if its the 1 step colder plugs causing this effect but if someone has any idea that would be great. when i cleared the code i noticed there was absolutely no misfiring. only on start up it was being wierd. help!!!
Forgot to mention I'm not sure if this helps or not... i recently put in an injen cai, and test pipe so i have no cat in my dp or test pipe.. i need a cat so I'm gonna be putting in a high flow magna flow cat..
and I'm running stage 2 on the a/p
I've been looking on forums some ppl say injector seals, i don't think its that.. when i was holding the gas down a bit i did notice some noise with the idling (did sound like misfiring) but when the car was warm it went away.. I'm not sure if it has to be because of the test pipe i recently put in but if someone can explain if they have gone thru this before that would be great
anyone??? lol
Have you tried google yet? There's tons of info online.
It could be a whole shit load of things:
- boost leaks
- improperly gapped plugs
- coil pack broked
- wires broked
- EGR stuck
etc etc
-
Random MS3 Chat Thread
Oh yea that crazy search engine thing again.
-
Re: Random MS3 Chat Thread
yea I've looked online there are so many different possibilities. i think its the plugs.. just have to figure out how to gap them properly as i do not know how too lol
-
Re: Random MS3 Chat Thread
Pretty easy to gap them but how did you install them without gapping them properly to begin with?
-
Re: Random MS3 Chat Thread
Super easy to gap plugs, just buy a tool from a shop and getter done! :headbang
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
Lockdown
Pretty easy to gap them but how did you install them without gapping them properly to begin with?
i didn't know you had to gap them! i thought u had to just r+r.. i have ivt22 in there.. whats it supposed to be gapped at?
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
pwdunmore
Super easy to gap plugs, just buy a tool from a shop and getter done! :headbang
i see canadian tire has it for $3.. i gotta get this done lol!
-
Re: Random MS3 Chat Thread
Check MSF for what guys are using, Use the Google search bar in their forum. Most handy thing ever :) Other than a fleshlight
-
Re: Random MS3 Chat Thread
from reading the forums. apparently they already come gapped out of the box between .28 and .30... i guess i still gotta check lol
-
Re: Random MS3 Chat Thread
You definitely should always check. Get the proper tool and it's a piece of cake.
If you check them before putting them in, that way you can be sure they are correct and you don't have to do the work twice because plugs take a little longer with the top mount on
-
Re: Random MS3 Chat Thread
...or it could be from running catless on a rich OTS tune in the colder mornings...
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
Fobio
...or it could be from running catless on a rich OTS tune in the colder mornings...
fobio i think your right, thats what i was thinking.. i checked the plugs they are all correctly gapped. hopefully once i put the high flow in it wil fix the problem
-
Random MS3 Chat Thread
Quote:
Originally Posted by
mikey32235
fobio i think your right, thats what i was thinking.. i checked the plugs they are all correctly gapped. hopefully once i put the high flow in it wil fix the problem
What down pipe are you running?
-
Re: Random MS3 Chat Thread
What sort of sound was it making before it warmed up? did it sound like marbles under the valve cover?
-
Re: Random MS3 Chat Thread
Quote:
Originally Posted by
mazdaspeedemon3
Quote:
Originally Posted by
Snotrocket
I hope nobody borrows your computer some day and sees that you googled whale penis.....
Quote:
Originally Posted by
Fack_Dude
Your facccccckkkkked.
Quote:
Originally Posted by
pwdunmore
lmao... I would love to see the google search history
Quote:
Originally Posted by
fywdyl
He looked up, "JBR WP SRI".
LMFAO! i just seen this now hahahahahahahahahahahaha
-
Re: Random MS3 Chat Thread
not sure what dp cause it came with one.. I'm gonna cut and weld the magna flow one in. and it kind of sounds like a light popping sound until i warm it up a bit then it stops
-
Re: Random MS3 Chat Thread
did you check that the coil packs are not cracked? can be hard to see but i have seen this happen more recently. wipe the top of them off and look for a fine hair line crack.
-
mikey32235 everything is broken help me thread.
-
mikey32235 everything is broken help me thread.
-
Re: mikey32235 everything is broken help me thread.
lol i love it! so thoughtful :chuckle
-
mikey32235 everything is broken help me thread.
What does he need help with?
-
mikey32235 everything is broken help me thread.
Loki is supposed to transplant all his posts from random chat to here.
-
Re: mikey32235 everything is broken help me thread.
Quote:
Originally Posted by
Thrizzl3
What does he need help with?
Everything!!
-
Re: mikey32235 everything is broken help me thread.
Mikey needs to sell his speed and buy back his slowvo....lol
-
Re: mikey32235 everything is broken help me thread.
-
Re: mikey32235 everything is broken help me thread.
annnd just moved 135 posts...
had to go through 22 pages of the Random Chat thread to gather it all....
enjoy..
-
Re: mikey32235 everything is broken help me thread.
Haha. That's a shit to of fail removed.
-
mikey32235 everything is broken help me thread.
Now Mikey, any future problems get posted here.
-
Re: mikey32235 everything is broken help me thread.
6 pages & 135 posts.... Damn!!!'
-
Re: mikey32235 everything is broken help me thread.
-
Re: mikey32235 everything is broken help me thread.
Quote:
Originally Posted by
Fack_Dude
Mikey needs to sell his speed and buy back his slowvo....lol
lol now now lets not beat up on mikey! that volvo was pimppppppp!!!!!!! :headbang
-
Re: mikey32235 everything is broken help me thread.
-
Re: mikey32235 everything is broken help me thread.
Quote:
Originally Posted by
boyracer
6 pages & 135 posts.... Damn!!!'
153 .. including this one
-
Re: mikey32235 everything is broken help me thread.
I love this forum lmao... If I ever have a problem I can go to this thread and see if mikey found a fix for it :P
PS I will be at stage 2 with you soon! Where did you get your step colder spark plugs?
-
Re: mikey32235 everything is broken help me thread.
Quote:
Originally Posted by
pwdunmore
Where did you get your step colder spark plugs?
You can get it at JRP or Garage 16. I have ITV22 and my car is stock :s
-
Re: mikey32235 everything is broken help me thread.
I Got all my stuff from edgeautosport!
-
mikey32235 everything is broken help me thread.
Much fail to ensue. Stay tuned.
-
Re: mikey32235 everything is broken help me thread.
Quote:
Originally Posted by
Snotrocket
Much fail to ensue. Stay tuned.
http://i455.photobucket.com/albums/q...ce/ohsnap1.gif
but seriously..he'll be ok
-
Re: Random MS3 Chat Thread
lol i put in my cat today, no more smoke haha its all goooooood.
-
Re: Random MS3 Chat Thread