The Wolf's 07 CWP GS

[Dave_The_BMXER]

What size tires are you on?

I never touch my pinch weld, but I think I am a little higher than you

[The Wolf]

I'm on 215/45's. it may not be the pinch welds though. fender to ground I'm 23 1/2"

[Burner]

I didn't think I was rubbing my pinch welds at my previous height but apparently I was. The paint was rubbed off of them when I checked yesterday. I'm glad I only took 1 collar off though.

[Dave_The_BMXER]

Ah the 45s would explain it

[The Wolf]

yeah kinda beefy haha

[Aitch]

Y'all need smaller tires. I rub the under-engine splash guard but not the pinch weld.

[The Wolf]

Y'all need smaller tires. I rub the under-engine splash guard but not the pinch weld.

thinking about it, I don't think I'm rubbing the pinch weld... most rubbing happens only when the wheel is turned. I think it's the fender liner right where it meets the fender. Also rub the liner on full lock, but DGAF. (I swear I'm not 18)

Also, I will be buying a new centre cap assembly over the winter to replace the one I lost. If anyone knows where I can get the whole thing (pictured below), I would probably buy them a Stewart's Key Lime Soda (I'm looking at you, BMXer).


Will probably replace all the logo caps while I'm at it, since they're looking rough, and thinking about going with flat caps instead of hex's (my wheels come stock with 1/2 caps)

Thoughts?

ANOTHER EDIT:
I will hopefully be replacing my mashed bumper over the winter. Maybe saving my pennies for an OEM lip.

[Aitch]

I need polished center caps in my life. Can't decide what style I want. Maybe if I can find another 1/2 height one we can work out a deal for yours

[The Wolf]

yes, that is a definite possibility haha

[Dave_The_BMXER]

Might take me awhile to dig up the contact. I did it through hotmail (!!!)

[The Wolf]

Last photo before winter mode likely. Come spring I'm hoping for a couple major changes

[The Wolf]

Made the switch to winter mode at the shop after work today.

[m3rk]

Super clean! Really great pic!

[Shinglez]

Man your ride is too sex

[CH0SiiN1]

Wow impressive.. I'm so envyous

Keep up the amazing work!!

[The Wolf]

Thanks guys! Means a lot

The car got some new plumbing today. Huuuuge difference from stock...

[stevenma188]

OE MS3 CBE?

[The Wolf]

Correct sir

[stevenma188]

Race pipe or you welded on your OE cat?

[The Wolf]

Welded to the OE cat. I didn't want a deafening exhaust... It's plenty loud to say the least

[stevenma188]

Weaksauce :p

[The Wolf]

Will you still pass emissions with a race pipe?

[CH0SiiN1]

There goes the fuel mileage lol.. Ever since I put a CBE and Intake my fuel costs have been climbing, not because it effects the fuel mileage but because the novelty never wears off.. Its been half a year and Im still heavy footed, I can only imagine if I get a header.. or race pipe

[CH0SiiN1]

Will you still pass emissions with a race pipe?

I believe I asked him the same thing a while back, I think he said I'd be fine.

[Shinglez]

Videeeeooo breeoooo