mikey32235's ride thread

[Kiyomi]

I will be getting the head cylinder re done, and the block obviously honed and bored with the new pistons and rings... why cant anyone be positive about this!! no more compression problems when its all done.

hehe, because you were trying to sell the car as is with knowledge of the compression problems. kind of like giving up and would have potentially screwed over someone else.

gl with your build and hope it goes well.

[Mr Wilson]

gl with the build.

[mikey32235]

thanks guys. I'm planning on having all my parts in within the next few months. i dont plan on driving my car in the winter from now on, so i will have everything by october/november time, then the teardown will start then. ill keep posted with the updates on what has arrived!

[mikey32235]

Update, I have purchased my BNR S3 turbo, here is the upcoming list of things that i need to aquire. im planning on having everything by the next few months or so.. I would like to drive the car until november and start the build during the winter, that is the plan.

Next on the list:

- Pistons
- Rods
- Rebuild kit
- Mahle bearings
- Catch can
- EGR delete plate
- Injector seals
- Grimspeed EBCS
- Bosch 3-bar MAF
- JBR widepath 3.0 intake
- Snow performance Stage 2 MAF kit

.....exciting right?!

[Genpu_Mz3]

boss

[mikey32235]

just arrived at the doorstep!

- Catch can
- EGR delete plate
- Injector seals
- Grimspeed EBCS

also the BNR S3 turbo arrived last week!
...

will be purchasing in a few weeks the following:

1. K1 connecting rod
2. Wiseco Pistons
3. JBR IM TB gasket
4. Bosch 3 bar tmap sensor
5. jbr 3.0 wide path intake
6. motor rebuild kit
7. battery small tray
this will run me just over $2000.. then the build begins!

[loki]

Didn't you sell the bnr turbo?

[mikey32235]

Didn't you sell the bnr turbo?

was going to then backed out lol

[loki]

was going to then backed out lol

ok just so you know any classifieds post you create moving forward will automatically get deleted.

[mikey32235]

ok just so you know any classifieds post you create moving forward will automatically get deleted.

why?

[greyseason]

ok just so you know any classifieds post you create moving forward will automatically get deleted.

lmao

[mikey32235]

Just placed an order for the following:

- Wiseco pistons overbore
- Eagle rods 22.5mm
- HTP 3" Intake
- Bosch 3bar map sensor
- plug and play harness
- motor build kit
- mahle bearings
- jbr TIG's

[greyseason]

excited to see the dyno sheet when she gets done

[peterm15]

excited to see this when she gets done

It will look the same. Lol.


Planing on doing the work yourself?

[greyseason]

It will look the same. Lol.


Planing on doing the work yourself?

fixed

[loki]

excited to see the dyno sheet when she gets done

I think everyone is more interested in the compression results

[greyseason]

I think everyone is more interested in the compression results

i have something wrote along those lines, but figured he's heard enough of that haha

[mikey32235]

i have something wrote along those lines, but figured he's heard enough of that haha

appreciated lol

the teardown and re assembily yes ill b doing myself. engine work (head cylinder rebuild, block machining etc) I have someone doing that for me.

[mikey32235]

just bought snow performance meth kit

[Snotrocket]

Who's doing your machine work?

[mikey32235]

Who's doing your machine work?

theres a place in markham i was refered to by one of my mechanics at my old work called rainbow automotive... there giving me cost price to do the block and head cyl. i can do the teardown and re-assembily myself.. Im gonna get in touch with APR as-well and see how much they want to do it cause i know there probably one of the best in town. if anyone has any suggestions let me know/ also how much they paid if possible

@Snotrocket

[Snotrocket]

Keep us posted. Some of us are interested in machine shop options.

[mikey32235]

Keep us posted. Some of us are interested in machine shop options.

will do man.

[mikey32235]

Engine came out last saturday, it has been at the machine shop from yesterday, should be getting it back by next week. here are some teardown pics: http://s1278.photobucket.com/user/mi...g.html?filters[user]=134954184&filters[recent]=1&sort=1&o=0
http://s1278.photobucket.com/user/mi...g.html?filters[user]=134954184&filters[recent]=1&sort=1&o=1
http://s1278.photobucket.com/user/mi...g.html?filters[user]=134954184&filters[recent]=1&sort=1&o=2

[pwdunmore]

Engine came out last saturday, it has been at the machine shop from yesterday, should be getting it back by next week. here are some teardown pics: http://s1278.photobucket.com/user/mi...g.html?filters[user]=134954184&filters[recent]=1&sort=1&o=0
http://s1278.photobucket.com/user/mi...g.html?filters[user]=134954184&filters[recent]=1&sort=1&o=1
http://s1278.photobucket.com/user/mi...g.html?filters[user]=134954184&filters[recent]=1&sort=1&o=2

If you want to post pics click on the right, beside the picture: IMG [Url=http:\\"blahblahblah"...

Do that for picture in your gallery and paste that link instead of the actual web address @mikey32235