mikey32235's ride thread

[mikey32235]

lol, theres power to the wire i tested it. no clue, gonna look more into it tomoorrow.

[pwdunmore]

Takes pics of the wiring + system and post them, that's the only way I can help lol... fack_dude is right, its ****ed

Try to get them in focus too

[mikey32235]

Takes pics of the wiring + system and post them, that's the only way I can help lol... fack_dude is right, its ****ed

Try to get them in focus too

will do sir!

[Fack_Dude]

will do sir!

Bro. Remember that I told you NOT to go with the boost application.

[Snotrocket]

Sounds like a seized muffler bearing...

I'd start there.

[miako]

Bro. Remember that I told you NOT to go with the boost application.

I have MAF voltage application, have you tried MAF instead of boost to rule out some possibilities?

[mikey32235]

talkingto some people andthe guys at edge reccomended theboost kit. i can switch to a maf kit but then i will need a re tune... nota problembut ill stick to what i gotfor now. they reccomended to get the bioost kit.

gonna try in a few hours to get the light to work

[loki]

talkingto some people andthe guys at edge reccomended theboost kit. i can switch to a maf kit but then i will need a re tune... nota problembut ill stick to what i gotfor now. they reccomended to get the bioost kit.

gonna try in a few hours to get the light to work

why would you think going with the boost kit would be better than MAF?

How often are you above 10 psi when you're in boost??

oh yeh...all the time.

[mikey32235]

Just bought some new gauges (oil pressure/boost/fuel pressure) , oil filter conversion kit, adapter plate for oil pressure gauges All from pro-sport. the conversion kit i got from avante mazda. only $60, not bad!

[mikey32235]

noticed my driver side corksport sway bar link snapped after the snow storm this past week. i hit some bad pot holes that i couldnt see drivving home, definately what caused it. got off the phone with corksport this morning and they sent one out to me today!

[mikey32235]

[schmat66]

i like

[FD22]

noice

[mikey32235]

thanks guys!

[mikey32235]

rims have arived!

[pwdunmore]

Wow, hope your car doesn't end up on blocks with those

[mikey32235]

Wow, hope your car doesn't end up on blocks with those

lol! my car stays in the garage all night!

[loki]

Wow, hope your car doesn't end up on blocks with those

You mean to take these off to steal the ms3 brake pads?

[pwdunmore]

You mean to take these off to steal the ms3 brake pads?

I wonder if that would be considered braking and entering...

[loki]

I wonder if that would be considered braking and entering...

Yes!!!!!

[mikey32235]

lol hahaha

[mikey32235]

alright so I'm a little concerned here… after reviewing a wot 4th gear, I've come across some issues, running too rich…timing off..and small knock at one point.. flat lines at top end too..

I contacted brian at APH just waiting on his response on what to do. is it even safe to drive?

[breakfasteatre]

what you just said means nothing. we would need to see logs, but in reality, you should be consulting with your tuner, not the internet

[mikey32235]

what you just said means nothing. we would need to see logs, but in reality, you should be consulting with your tuner, not the internet

how can i post the log?

[optiklenz13]

When did you do your log? It's so cold..

Go advanced and attach the log, there's an option to attach files on here. I'm on my phone, otherwise I'll check the step by step..