What Did You Do To Your Car Today?

[staax]

wet sanded it with 800 grit, 1000 grit, 3000 grit, then polished with (http://www.canadiantire.ca/en/pdp/si...l#.VdHtn_lVhBc). If you can get your hands on it, I would suggest using this over it but I can't find it anywhere other than online (http://www.amazon.com/gp/product/B00...U77RN3DHFZ2PXB).

Looks good, I would also finish it up with a sealant periodically to prevent you from having to do this again in the future though.

Somethig like opticoat which is pricy, or for a cheaper route Meguiars headlight protectant

[Noobster12]

Installed my JBR Stage 1 Short shift plate kit on my 2.0L




Final installation

[ryan2.3]

wet sanded it with 800 grit, 1000 grit, 3000 grit, then polished with (http://www.canadiantire.ca/en/pdp/si...l#.VdHtn_lVhBc). If you can get your hands on it, I would suggest using this over it but I can't find it anywhere other than online (http://www.amazon.com/gp/product/B00...U77RN3DHFZ2PXB).

I was looking at that opti coat, it was between that and wrapping it in clear vinyl

[betterthansx]

I was looking at that opti coat, it was between that and wrapping it in clear vinyl

If you are going to do vynil, might as well do 3M clearbra on it. It will be clearer than vinyl and it will take the heat of the headlights better than vinyl.

[jaimie08mazda3]

wet sanded it with 800 grit, 1000 grit, 3000 grit, then polished with (http://www.canadiantire.ca/en/pdp/si...l#.VdHtn_lVhBc). If you can get your hands on it, I would suggest using this over it but I can't find it anywhere other than online (http://www.amazon.com/gp/product/B00...U77RN3DHFZ2PXB).

I got lazy and bought another set with angel eyes. Two birds stoned at once.

[aitakeru]

Looks good, I would also finish it up with a sealant periodically to prevent you from having to do this again in the future though.

Somethig like opticoat which is pricy, or for a cheaper route Meguiars headlight protectant

Thanks for the tip! I'll make sure to pick one up if I remember.

I got lazy and bought another set with angel eyes. Two birds stoned at once.

I would love to do the same thing but no $$$

[jaimie08mazda3]

Thanks for the tip! I'll make sure to pick one up if I remember.




I would love to do the same thing but no $$$

Realistically I bought the set for 120 and sold my old ones that were still pretty good for like 60 and a set of tweeters so it wasn't a whole crazy amounts. gen 1 parts are cheap if you search for them lol.

[aitakeru]

I was looking at that opti coat, it was between that and wrapping it in clear vinyl

I have a buddy who has his wrapped and it looks clean, and it's been years.

[aitakeru]

Realistically I bought the set for 120 and sold my old ones that were still pretty good for like 60 and a set of tweeters so it wasn't a whole crazy amounts. gen 1 parts are cheap if you search for them lol.

That's not that bad actually. Okay, so maybe I'm just too lazy to look.

[microtandme]

Got my windows 15% for $100 in south Columbia and new kenwood 6x8 door speakers wayyyyy better than stock I'd recommend to anyone that is interested in upgrading them

[silverstarmazda]

put my 19s on lol, man it looks stupid with the factory height

[jaimie08mazda3]

That's not that bad actually. Okay, so maybe I'm just too lazy to look.

There ya go lol. Between classified here, kijiji and the scrapyard I've saved a lot. I love the scrapyard. I've saved a lot on body parts and my seats and other things from cars that just blew up or rusted right out.

[jaimie08mazda3]

put my 19s on lol, man it looks stupid with the factory height

So you know what you need to do.

[silverstarmazda]

So you know what you need to do.

plans are already in place!!! going air hahaha your gonna love it

[jaimie08mazda3]

plans are already in place!!! going air hahaha your gonna love it

I knew it was a matter of time before this one starts to get modded. Bet it won't be cheap though lol.

[natspriceless]

Like a nervous parent I'm waiting to find out if McNally Auto can get Vixxxen on the hoist to do an alignment 😯

[Aitch]

If they can't, you'll be a little disappointed but a little proud.

[natspriceless]

If they can't, you'll be a little disappointed but a little proud.

Lol...not going to lie I did feel proud when they came over to tell me...

They were able to get her on thankfully

[Reddie1337]

Alignment, they have a flat hoist.

[jaimie08mazda3]

Alignment, they have a flat hoist.

This has me curious lol.

[ryan2.3]

Do you know the mufflerman?

[jaimie08mazda3]

Do you know the mufflerman?

Yea he lives on Hespler road.

[loki]

Do you know the mufflerman?

Yea he lives on Hespler road.

I think he missed your joke...

[dentinger]

Yea he lives on Hespler road.

Pretty sure he lives on Drury Lane...

[jaimie08mazda3]

I think he missed your joke...

I got the joke. Just changed drury lane to hespler road. Come on bro you think I'm new? lol.