New suspension pics

[Dave_The_BMXER]

Took some pictures finally on the new set up.

I'm on BC BR coilovers now with shorter/higher rate springs, shorter shock cartridges and smaller lock rings up front.

I spent a lot of time emailing back and forth with BC's R&D department figuring out how to get my front end lower without sacrificing any ride quality or removing any lock rings and such.

The final result is exactly what I wanted, no finger gap all around (but at the same time not tucking) without saggy rear syndrome.

I'm not running camber arms if you are curious and the front is all the way down but I think the back has little more.

This was on the standard BC's (note the high front end)


And this is now





Big thanks to Peter @ Next Mod and the APH crew for getting me where I needed to be.

And Mat (Seche Media) for my vinyl needs.

[jonjon72]

Sweet looking ride Dave. Amazing job getting it all put together with the perfect height!

Coilovers you say.....hmmm.

[Default User]

I think you should change your name to Dave_The_Pebble_Pusher

Thumbsup to you for getting things done the way YOU want them.
Not many people will go as far as contacting the R&D dept at the manufacturer for help and advise.

Now the $1mill question...what's next?

[stevenma188]

^What size of tires are you running Dave? they look really small on your car.

[mazdilla]

Really nice stance.

What brand is your sunroof visor?

... its nice and low, and I really, really, really need one.

Thanks!

[Thrizzl3]

you still have your splash shield on dave?

[stealthman12]

such a sweet ride..and nice plate covers...JDMEGO FTW..lol

[hit26k]

Drop looks really good. I think you and Steven need to have photoshoot to see who has the lowest hatch on the boards.

[Dave_The_BMXER]

Sweet looking ride Dave. Amazing job getting it all put together with the perfect height!

Coilovers you say.....hmmm.

Thanks, and ya the ride is 10000x better than my previous setup

I think you should change your name to Dave_The_Pebble_Pusher

Thumbsup to you for getting things done the way YOU want them.
Not many people will go as far as contacting the R&D dept at the manufacturer for help and advise.

Now the $1mill question...what's next?

Not many people no, but I wanted to be happy with my new purchase. Mike @ BC was really great I am going to write a review soon of the product and the entire process.

What's next? More aggressive wheels. The new goal is no poke, no stretch, perfectly flush

^What size of tires are you running Dave? they look really small on your car.

215/40s I am pretty sure

such a sweet ride..and nice plate covers...JDMEGO FTW..lol

Thanks! And ya I dig the plate cover. I have 2 actually but didn't like it on the front.

Really nice stance.

What brand is your sunroof visor?

... its nice and low, and I really, really, really need one.

Thanks!

Autoshade I think? I will check tomorrow.

you still have your splash shield on dave?

Nay. Alum one soon first time in a long time anything will be under there.

Drop looks really good. I think you and Steven need to have photoshoot to see who has the lowest hatch on the boards.

I think he is lower, he rubbed through his fender liners and is trying to take home a lowest car trophy at the next show he enters.

But I would like to do a shoot with him once his car is done

[dadinho_nfg]

love the ride broo...
saw u the other day at ice land at the skate park when i drove by i notice the stance...
looking sick!!!!!!!

[Soyabean]

looking good Dave. Very very nice drop

[RECREATIONAL_ANXIETY]

LOOOOOOOOWWWWWW!!! Looks awesome dude.

[aris]

looks awesome

[cwp_sedan]

Siiick! Looks awesome Dave!

[Drago]

What type of rims are those? I really like them!

[Steven]

Looks really good Dave! Glad you got the height you wanted. We'll have a photoshoot after I get back from my honeymoon. My car is finally done now.

[Dave_The_BMXER]

Thanks again guys

Drago the wheels are A-tech Monoblocks which are sold as DAI Monza's here.

They may be discontinued though, Rick @ Garage 16 tried to do a group buy and couldn't get them anymore.

Oh and congrats Steven!

[philipfreire]

Looks really good Dave! Now tint your windows!

[Dave_The_BMXER]

Lol most are tinted but they front 2 were down and one has not been re done after a break in.

[Riftler]

Damn you got it lowered even more? And it looks so nice! Can you no longer fit your hand under the front like you wanted?

[Kevin@nextmod]

I saw them put on the new coilovers that day when they were tuning my car. Its pretty slammed now and i like the ride on your car then mine..!! (I didn't drive it, i went out with alic for a road test)

[Dave_The_BMXER]

Riftler, ya no more hand above the tire

And Pearly thanks, I saw your car when I picked it up.

[RBoy8]

Perfect stance, Dave! I love it. Something about that last picture really does it for me. So so gooood.

[Dave_The_BMXER]

Last pic is my fave too.

Apparently this is now called the extreme drop package available from BC

[against the grain]

Took some pictures finally on the new set up.

I'm on BC BR coilovers now with shorter/higher rate springs, shorter shock cartridges and smaller lock rings up front.

I spent a lot of time emailing back and forth with BC's R&D department figuring out how to get my front end lower without sacrificing any ride quality or removing any lock rings and such.

The final result is exactly what I wanted, no finger gap all around (but at the same time not tucking) without saggy rear syndrome.

I'm not running camber arms if you are curious and the front is all the way down but I think the back has little more.

This was on the standard BC's (note the high front end)


And this is now





Big thanks to Peter @ Next Mod and the APH crew for getting me where I needed to be.

And Mat (Seche Media) for my vinyl needs.

drooooling.....