So... ummm... Yeah any ideas? Clearly a plunger isn't working lol
So... ummm... Yeah any ideas? Clearly a plunger isn't working lol
2008.5 Mazda3 Black Mica GS Sedan- Injen RD6061 CAI - Koni Yellows - Eibach Prokits - SPC Rear Camber Kit - Tenzo Type M 18x8 Powdercoated Bronze - Yokohama S.Drives 225/40/18 - Rolled Fenders - Rear Flares - Gforce Strut Bar - Prolumen 6000K - 3000k HID Fogs - Speedline Wide Angle Blue/LED Side Mirrors - LED Interior - Eyelids - LED 3rd Brake Light/Sidemarkers - LED Reflectors -LED Footwell/Trunk/Cup Holder Lighting - Solar Guard 28% Tints All Round - VG Sharkfin - Borla Catback - 07+ GS Lip - Eyelids - Sideskirt Extensions - Aluminium Pedals - Sickspeed Horns - Kenwood - Alpine - SPL -
cut a wire hanger and make it straight, then poke it in and see if it helps.
2010 Subaru STI
Mods:
Not enough room to list
Keep using the plunger..
Get yourself a plumbers snake. I think Home Depot might even rent the powered version. If you want to save your money though you could alway put on a big rubber glove and try to break up the clog with your hand.
I usually just let the toilet fill 3/4 with water, then let the relentless plunging begin. Plunge HARD!![]()
i,ll have to try the wire hanger tomorrow morning... I give up on the plunger.. This shit is making me want to vomit (pun intended lol)..
oh.... my god. Did you really just post this on a car forum?!
lol well, seeing how its the only forum i visit.. I guess I did just post it here haha..
Ok the relentless plunging, i cant see how it is a good idea there a ton of crap in the toilet and the bowl is like almost full! I,ll need a bio hazard suit :/
Gonna see if i can grab a snake tmrw, but i heard it damages the porcelin in the bowl...
closet auger hmm ok time to hit up the home depot tmrw. Do i need a power drill to use it?
Forget a shower i need full blown decontamination after this grr..
Damn these lo flow toilets!! No power.. Maybe i can add a turbo to the flush system hmm.. lol
Last edited by omalak; 07-23-2010 at 12:55 AM.
Have you tried using draino fluid?
2008.5 Metropolitan Grey Mica Mazda 3 GT Hatch with Luxury Package DONE: OEM LED Side Mirror Turn Signals | TM3 Decals / Plates | Axela Badge | 3M Scotchguard Film on Front Hood / Fenders | Solarguard Quantum Tints 37% Front 28% Back | Flipkey | JDM Rainguards | MS3 Rear Valence | Super White LED Interior / Trunk / License Plate Lights | Smoked LED Sidermarkers | Powdercoated Blue 18" OZ Ultraleggera Rims | Michelin Pilot Sport AS3 | Blue Calipers with Gunmetal Axela Decals | HID 6000K/3000K with Yellow Film Fogs | Hella Tones | Rally Armor Mudflaps | Powdercoated Gunmetal Xenon Expert Aluminum Pedals | Clear Reflectors | Carbon Fibre Rear Emblem Insert | Redline Elite Hood Lifts | CP-E Tow Plate | Her: 2012 Sky Blue Mica Mazda 3 GS
no havent used Draino, i dont have any atm... Gonna be making alot of purchases at home depot tmrw lol hopefully one of the remedies works
Use your hand push it in![]()
You don't need a drill for a closet auger. All the ones I've used are hand cranked. Look like this:
![]()
Word of advice: You might waste a little more water, but a courtesy flush goes a LONG way to not having your toilet clogged.
Damn son, must of been a big log.
I don't buy a car with out AWD.
I had this problem about a month ago. It took me 3 trips to Wal-Mart and 5 plungers to get it "fixed".
This plunger saved the day, it was $15 from Wal-Mart. It works like magic.
![]()
lol Burner u seem to be an expert
Get the rubber gloves out and scoop it out into a bag/bucket.
Be brave and flush with lid open as mentioned above and/or have the super plunger pictured above.
(Geez, never thought I'd be giving this type of advice)