HellaFlush mazda3s?

[Dave_The_BMXER]

Kit lacks air struts and the bags.

So it is just tank, compressor, management, and lines. Good start but incomplete.

[n00bMeiSter]

Kit lacks air struts and the bags.

So it is just tank, compressor, management, and lines. Good start but incomplete.

explains why it's so cheap

[loosecannon]

Kit lacks air struts and the bags.

So it is just tank, compressor, management, and lines. Good start but incomplete.

Thats the reason why i posted it if anyone was looking to start somewhere.

[midnightfxgt]

You can buy the Autopilot V2 from Airlift cheaper, and its a much better system than the old one

You can do air for around $2500-$3000 without digital air management (Just a box and some paddle switches). If you want didgital management add another $1000-1500.

-John

[hit26k]

[turtle]

That rolling shot is amazing.

[Aitch]

Gawd, nice wheels for cheap. 17x 9.0+48 17x10.0 +38. Someone jump on these before I get tempted.

[Dave_The_BMXER]

Damn those are quite nice.

[loosecannon]

Gawd, nice wheels for cheap. 17x 9.0+48 17x10.0 +38. Someone jump on these before I get tempted.

Wow. They look amazing. 17x10? What profile tires are needed to make these fit?

[Aitch]

I'm going to guess 215/40 would look good on there. Probably going to have to run a small spacer to clear the trailing arms (I was tight with my 9" +40mm) and then some extra camber as well.

In fact, spacers and a bit of camber might be needed up front. Still, killer setup.

[schmat66]

are you guys still doing a low contest this year? very curious to see this.

i know me and shea are going ham low! were still downnn

[zzz3]

rs4 avant w/perfect drop&tuck in lambo orange

[Dave_The_BMXER]

I'm going to guess 215/40 would look good on there. Probably going to have to run a small spacer to clear the trailing arms (I was tight with my 9" +40mm) and then some extra camber as well.

In fact, spacers and a bit of camber might be needed up front. Still, killer setup.

Pretty much bang on what I thought too. A 3mm in the back and a 5mm up front should work. Maybe even 5 all around.

[Burner]

I'm tempted to buy those rims...

[Kappa]

not a fan of the wheels... maybe if they where painted though...

[Y.B]

I love how the 350z rims look on the mazda 3s!

[gallipd001]

do the 350z rims fit relatively easy on the 3? I remember seeing a thread about this a while ago but can't seem to locate it now. any fender pulling/rolling or spacers required to make these work??

[GWN]

those wheels pictures above are 18x8 +30 / 18x8.5 +33 if I'm not mistaken, shouldn't have too many problems making them fit

[Hyperion]

do the 350z rims fit relatively easy on the 3? I remember seeing a thread about this a while ago but can't seem to locate it now. any fender pulling/rolling or spacers required to make these work??

Looks like a bit of rust on the rear

[gallipd001]

well in that case these just came up yesterday...

http://toronto.kijiji.ca/c-cars-vehi...AdIdZ355231565

i'd rock them if i had the extra cash for another set of wheels. i think they would sit flush and look awesome

[Punkrockjohn]

I love how the 350z rims look on the mazda 3s!

Yummyyyyyy

[CoolColombian]

Do you guys think the mazda center caps will fit in to those rims? I can't really tell on that picture but they look like mazda center caps, I wonder how this would look on my 2011 Mazda 6 lowered on Prokits. That kijiji deal is very tempting, any one want a set of RX-8s with Yokohama Envigors? lol

[Kiyomi]

bad gas mileage and poor performance. those things look sexy but weigh way too much.

[Punkrockjohn]

bad gas mileage and poor performance. those things look sexy but weigh way too much.

especially with a 2.0L like mine, I'm so glad i didnt go 18s and stuck with 17s

[gallipd001]

bad gas mileage and poor performance. those things look sexy but weigh way too much.

yup good point. from what I've read they are about 25 pounds (roughly) each. they do look amazing though