Random MS3 Chat Thread

[boyracer]

Word picking up my CP-E DP and HPFP tonight!!!!

Now we're talk'n!

[Turok]

Now we're talk'n!

Hell ya Probably my last big purchase for this year.. might squeeze in a meth kit and passenger side mount between now and end of summer..

[Fobio]

We can do this...

What you gotta do: Turbochargers are an excellent cooking tool, as they are heated up by the engine's exhaust gas, but they don't release any of those pesky toxic chemicals that health nuts hate. Toss a can of chili on there and, complimented by some wrapped hot dogs, you have a delicious meal.


As you've seen before, Chili can be cooked on the turbo. But there is more to a good meal. Start by wrapping some hot dogs (good ones like Hebrew Nationals, or Nathans) in foil.

Stick these between the injector and the valve cover (this holds 5 dogs). Then wrap hot dog buns in foil and stick them between the injection pump and the block (this holds 2 buns).

You can put more buns on the oil filter and on the intake, just make sure they don't get too hot. Drive for 30 min, and then pull everything off the engine, and you have Chili Dogs!

Grate some cheese if you'd like to be fancy! best part of this is all the food is pre-cooked so even if you get hungry before it's done, as long as it's hot you'll enjoy it.

[Turok]

I got some chilli at home

[BlueStreak]

We can do this...

Or, as evidenced by my manifold, we can flash cook a steak in 2 pulls on the dyno.

[Mr Wilson]

I'll take mine medium rare.

[loki]

I'll take mine medium rare.

^^this


I bet if I was cooking the steak on your manifold I would find a way to burn it huh MUTHER***KER!!


MUTHER***CER!!!!!

[BlueStreak]

^^this


I bet if I was cooking the steak on your manifold I would find a way to burn it huh MUTHER***KER!!


MUTHER***CER!!!!!

Funny enough, I had a reply just like that ready to go.

[loki]

I'm going to cut my bumper/fenders some more.

would you believe still rubbing in the right rear

only on extreme bumps tho...

[boyracer]

I'm going to cut my bumper/fenders some more.

would you believe still rubbing in the right rear

only on extreme bumps tho...

Still? Damn!

[Fobio]

Due to the recent success thru the Ultra94 push, along with our efforts with the 300 car epic pic, there will be a influx of newbs. It is a sign that our efforts to grow at the club "thru strength" when we are strongest, rather than push for membership when the club is waning/dying, is working and members are excited to be part of TM3. Be nice to these human beings, and allow them a bit more leaway than we give the regular village idiots. Keep the humour positive and help keep the load light for Ami and the Mod Team while they carry out the BubbaQ and help us make a big push for the 300 car epic pic.

PSA by Fobio/Vincent

[CelestSpeed3]

I'm going to cut my bumper/fenders some more.

would you believe still rubbing in the right rear

only on extreme bumps tho...

I can cut the rear bumper support and make it fit, but like I said I think your tire is too tall. Either way after I cur the support it will likely never rub again. There won't ne anything left to rub.

[loki]

I can cut the rear bumper support and make it fit, but like I said I think your tire is too tall. Either way after I cur the support it will likely never rub again. There won't ne anything left to rub.

I already cut them. I still think the fender needs to be banged out some more. I'll tackle that tomorrow if need be.

I spent 1.5 hours grinding the f****ing cobb shifter weight with a dremel and it still rubs in reverse. fack

[Fobio]

I already cut them. I still think the fender needs to be banged out some more. I'll tackle that tomorrow if need be.

I spent 1.5 hours grinding the f****ing cobb shifter weight with a dremel and it still rubs in reverse. fack

why not just super-tighten the shifter weight onto the rear hole only?

[loki]

kneegrow you might be a genius....

that would have saved me some time...

[alhope34]

My right rear shock is blown again. This is the 4th OEM rear that I have busted and my car is at 139,901 kms as of today.

[Turok]

My right rear shock is blown again. This is the 4th OEM rear that I have busted and my car is at 139,901 kms as of today.

Time to go koni yellows.

[alhope34]

No money. I can't even replace the blown OEM one in the near future. I'll probably have to wait til July or August sometime. Until then my car will be rocking back and forth and up and down on the rear over any bumps on the right side.

I'm going to try and get an OEM replacement at the same time I do my oil, which I'll also need to rotate my tires. Would make for some decent enough work on an install day.

[SKYMP3]

My right rear shock is blown again. This is the 4th OEM rear that I have busted and my car is at 139,901 kms as of today.

my car has almost 50% KM as yours and my both rear are busted already.
Put the Koni on 2 months ago, said good bye to the problem.

[S.F.W.]

No money. I can't even replace the blown OEM one in the near future. I'll probably have to wait til July or August sometime. Until then my car will be rocking back and forth and up and down on the rear over any bumps on the right side.

I'm going to try and get an OEM replacement at the same time I do my oil, which I'll also need to rotate my tires. Would make for some decent enough work on an install day.

I understand money is tight. However, I would look at a non OEM solution. Given the rate at which you have replaced shocks, maybe try and keep an eye out for used Koni Yellows..or even a used coil over set.

[alhope34]

If I waited for that, at the prices these used things go for, I'll probably still be on a busted shock til next spring. I'd rather just pay the $140 when I get it for OEM. There are many, many other things going on right now that are much more important than modding my car. Like my maxed out line of credit and my credit card that is creeping back up now that work has been slow for a month and a half and will continue to be slow for a month or so to name a couple. No aftermarket option will be considered unless it will cost less than a single brand new OEM shock.

[loki]

still rubbing

[CelestSpeed3]

To roll it more we'll need a wheel spacer, and possibly a file.

[breakfasteatre]

muhhhhhhhh nators

[breakfasteatre]

i hate to say it, but it seems like you need to sell your car. you have wayyy extended yourself and driving it just adds to the debt