Random MS3 Chat Thread

[Fobio]

Something like this? I guess for connecting directly to the battery correct?

http://t0.gstatic.com/images?q=tbn:ANd9GcSTY44tFOm-zD7anmGF5DfCphRRBJs60Uuk5Z4EYCdlTV6pSdT1jg

holy shit dude...that's the waterproof (when not in use or when in use with waterproof sheath) usb plug I plan to use on my scooter. Why you would have found that one is beyond me!

[-cj-]

Just get some ring terminals and an inline fuse holder and do it right. Not to mention its cheaper.


But then you still need a switch. Reusing existing circuits is much cleaner. As long as you don't increase the actual fuse amperage, you're still safe. IE: IF you have a 30 amp circuit, and you add an 'add-a-circuit', re-use the 30amp for your main fuse and add a secondary which is less. That way, you aren't exceeding the circuit's total rated capacity. If you blow the 30 amp fuse, then find another one that might not be as loaded. IE: Cigarette lighter circuit

[rzapata]

holy shit dude...that's the waterproof (when not in use or when in use with waterproof sheath) usb plug I plan to use on my scooter. Why you would have found that one is beyond me!

Ahaha, I was looking through pictures of what Paul mentioned because I can't imagine how a ring terminal would be connected to the fuse box somehow (clearly I'm not an electrical guy). :chuckle

But yeah, I was merely referring to the ring terminal and the inline fuse. :chuckle

[CelestSpeed3]

Ring terminal is connected to the battery. Ignition source is done post fuse at the cigarette lighter. No switch needed.

You can also add another relay for simple logic control if needed.

[-cj-]

Definitely not simpler :)

I ran my meth pump off the eng bar 2 (or whatever it was called in the engine bay) and my stereo directly off the battery w/ 100 amp fuse. Never ran into issues. Other misc stuff I'd piggy back off existing circuits in the PJB, but I'd never increase the main fuse. Much cleaner...less cables. Your way is great, but I'd consider it over kill short of something that really needs it (Maybe meth pump would warrant it).

Then again, I bet you're no stranger to running cables :)

[loki]

Nowhere to ask this so I ask here

Why is darkice selling his accessport?

Wrote off his speed? Selling his speed?

[Karmaspeed]

Hi everyone just wanted to say hi because as of today I just picked up my 2012 cwp ms3. Some of you guys might remember me (filipino guy with ponytail) as I was there at Paul's place during one of your install days a few weeks ago; I came in a skyblue 3 gx hatch late in the afternoon. Anyways I'm always up to listening and learning new things with the speeds but won't be doing any mods for the first year or two as all my money is paying for the two new 3's, the wife is now driving the gx.
Cheers and looking forward to chat,
Carmelo

[S.F.W.]

Hi everyone just wanted to say hi because as of today I just picked up my 2012 cwp ms3. Some of you guys might remember me (filipino guy with ponytail) as I was there at Paul's place during one of your install days a few weeks ago; I came in a skyblue 3 gx hatch late in the afternoon. Anyways I'm always up to listening and learning new things with the speeds but won't be doing any mods for the first year or two as all my money is paying for the two new 3's, the wife is now driving the gx.
Cheers and looking forward to chat,
Carmelo

Carmelo - Good to see you make the jump. Nothing wrong with trying to wait to mod. Gives you lots of time to read and listen. That said.. resistance is futile..

[rzapata]

Hi everyone just wanted to say hi because as of today I just picked up my 2012 cwp ms3. Some of you guys might remember me (filipino guy with ponytail) as I was there at Paul's place during one of your install days a few weeks ago; I came in a skyblue 3 gx hatch late in the afternoon. Anyways I'm always up to listening and learning new things with the speeds but won't be doing any mods for the first year or two as all my money is paying for the two new 3's, the wife is now driving the gx.
Cheers and looking forward to chat,
Carmelo

Big congrats to you sir! Enjoy them boost! :thumbsup

[CelestSpeed3]

That makes 4 Mazda6 owners to jump to the Gen2 Speed3. The party is getting started again.

[2zoom]

Nowhere to ask this so I ask here

Why is darkice selling his accessport?

Wrote off his speed? Selling his speed?

Problems with his car...Not sure if anyone filled you in yet

[rzapata]

Problems with his car...Not sure if anyone filled you in yet

Not sure he comes to this thread... What kind of problems?

[2zoom]

Not sure he comes to this thread... What kind of problems?
Tranny problems.

[loki]

Shitty

So is it for sale or going in for warranty work? Or both

[rzapata]

So, looks like this weather is gonna hunt us all weekend! I'm gonna have to find a place where there's adequate shade to do my $#!&. Plan is, I was gonna use the whole Saturday to install/wire the gauges, place the vent pod as well and fix that screw hole that I messed up the last time.

If only this damn weather will cooperate!

[2zoom]

Shitty

So is it for sale or going in for warranty work? Or both

That part I do not know... I would assume its for sale because he's parting it out already

[Turok]

So, looks like this weather is gonna hunt us all weekend! I'm gonna have to find a place where there's adequate shade to do my $#!&. Plan is, I was gonna use the whole Saturday to install/wire the gauges, place the vent pod as well and fix that screw hole that I messed up the last time.

If only this damn weather will cooperate!

Ya the weather is suppose to be sh1t all weekend. I wanted to work on my car this weekend as well.

[rzapata]

Ya the weather is suppose to be sh1t all weekend. I wanted to work on my car this weekend as well.

I know man! I was planning eveything for this weekend, reading up on stuff, printing out lots of pictures and whatnot. If anything, I think I'll just set up an umbrella beside my car. Because I'm gonna be taking apart the dash and water seeping in is just something that I wouldn't want to happen.

We'll see...

[Fack_Dude]

I know man! I was planning eveything for this weekend, reading up on stuff, printing out lots of pictures and whatnot. If anything, I think I'll just set up an umbrella beside my car. Because I'm gonna be taking apart the dash and water seeping in is just something that I wouldn't want to happen.

We'll see...

What the faccckkkk. Riz, get jimmy to do it and save yourself the headache.....lol

[rzapata]

What the faccckkkk. Riz, get jimmy to do it and save yourself the headache.....lol

He told me I'd have to place the vent pod myself as he's not very fond of it. :chuckle That was the plan originally though.

But hey, I like working on the car.. There's going to be lots of swearing and cursing for sure but in the end, I'll be satisfied. :chuckle

[Fobio]

He told me I'd have to place the vent pod myself as he's not very fond of it. :chuckle That was the plan originally though.

But hey, I like working on the car.. There's going to be lots of swearing and cursing for sure but in the end, I'll be satisfied. :chuckle

riz...working on the car and liking it is one thing...doing it out in inclimate weather for the sake of, getting yourself, your equipment and your car soaked... is far from delivering quality workmanship to the job, as well as not very enjoyable in the sense that doing hobby work should be.

[rzapata]

riz...working on the car and liking it is one thing...doing it out in inclimate weather for the sake of, getting yourself, your equipment and your car soaked... is far from delivering quality workmanship to the job, as well as not very enjoyable in the sense that doing hobby work should be.

No yeah, I totally agree.. If it keeps raining like this this weekend (which it appears to be), most likely, I'll postpone it and show Jimmy the surprise. :chuckle I wouldn't want anything electrical to get soaked. Plus water inside the vacuum tube is not something I would risk either.

Schupid weather, just wasted all that planning and crap.

[mazdaspeedemon3]

Nowhere to ask this so I ask here

Why is darkice selling his accessport?

Wrote off his speed? Selling his speed?

maybe he also realized paying $750 a month on insurance is ludicrous...

[Turok]

maybe he also realized paying $750 a month on insurance is ludicrous...

$750 a month?? That's crazy.

[Booostin]

some people should just stick to public transit lol

[mazdaspeedemon3]

$750 a month?? That's crazy.

something like that.. it was in the low to mid 700's

[Fobio]

something like that.. it was in the low to mid 700's

oh...you mean his parents sayin' FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU to $700+ a month for insurance?

[BlueStreak]

:chuckle

[Turok]

something like that.. it was in the low to mid 700's

Damn... that's insanely high.

[mazdaspeedemon3]

oh...you mean his parents sayin' FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU to $700+ a month for insurance?

lol i would assume thats the situation..

[zzz3]

some people should just stick to public transit lol

A la redrocket?

I forget if thats you with the sticker or the other (loud) red speed lol.

[Booostin]

A la redrocket?

I forget if thats you with the sticker or the other (loud) red speed lol.

Which sticker?

[zzz3]

Which sticker?

'redrocket', on the trunk.

[Booostin]

'redrocket', on the trunk.

Ohh now I remember lol... ya that is Adam a.k.a abstrakt

[Elusivellama]

That makes 4 Mazda6 owners to jump to the Gen2 Speed3. The party is getting started again.

Pu party, smiles all around! :D

[Fack_Dude]

No yeah, I totally agree.. If it keeps raining like this this weekend (which it appears to be), most likely, I'll postpone it and show Jimmy the surprise. :chuckle I wouldn't want anything electrical to get soaked. Plus water inside the vacuum tube is not something I would risk either.

Schupid weather, just wasted all that planning and crap.


I will install the gauge for you for a case 24 coronas. But I cannot guarentee the quality of the work bro. lol

[rzapata]

I will install the gauge for you for a case 24 coronas. But I cannot guarentee the quality of the work bro. lol

Ahaha, well, offer's tempting but I think I'm gonna try my luck first. :chuckle At least if I mess up, I only have myself to blame. :chuckle

[Fack_Dude]

Ahaha, well, offer's tempting but I think I'm gonna try my luck first. :chuckle At least if I mess up, I only have myself to blame. :chuckle

best of luck. lol

[loki]

I wouldn't let fack_dud put gas in my car, let alone install gauges.....

:chuckle

[alhope34]

Just replaced my rear right shock. Finally drives properly again. =) Took me only 35 minutes from start to finish.

[loki]

Anyone up for wings later?

Don't have a car and will need a ride...

[Mr Wilson]

Have a wedding tonight.....otherwise I would be in.

[S.F.W.]

Anyone up for wings later?

Don't have a car and will need a ride...

Maybe - at the Bowmanville Zoo right now. Keep me posted.

[2zoom]

Anyone up for wings later?

Don't have a car and will need a ride...

It's guys night with my son tonight. But if I was free I'd be down. sorry loki next time for sure

[S.F.W.]

It's guys night with my son tonight. But if I was free I'd be down. sorry loki next time for sure
going to do wings tomorrow night instead..

[Turok]

So since I got my HPFP installed.. I heard new sounds coming from inside the engine when I'm driving. Like the turbo spooling quicker? or the fuel pump? I'm not sure.. sounds very cool. Never heard this sound before. I know I have new sounds from the transmission after installing the TMM, but this is a high pitch sound.

Maybe it's just me and I'm hearing things. Just thought I'd see if any of you know what I'm talking about.

[Fack_Dude]

It's only in your head Adam...lol

[loki]

fuel pump won't make the turbo spool quicker..

[-cj-]

It's probably fuel pump whine. The pump is fairly noisy.

[Turok]

fuel pump won't make the turbo spool quicker..

I know that.. but something sounds different.. lol


It's only in your head Adam...lol

I swear this new high pitch noise it sounds awesome.. but your probably right it's all in my head :(


It's probably fuel pump whine. The pump is fairly noisy.

YES!!!! That's exactly what it is!!! Thanks Jerry :)

[Fack_Dude]

At least your car doesn't sound like a jet during take off.....lol

[Turok]

At least your car doesn't sound like a jet during take off.....lol

Jet engine sound would be nice :)

[rzapata]

Mr. Fack_Dude what is the Hepe Mexican Special Detail?? :chuckle

[Fack_Dude]

Mr. Fack_Dude what is the Hepe Mexican Special Detail?? :chuckle

You get to become a victim of my detail services. Lol

[rzapata]

You get to become a victim of my detail services. Lol

I think I know this... Is a rock polisher part of the deal? :chuckle

[boyracer]

You get to become a victim of my detail services. Lol

You going to detail my car? I'm in.

[Turok]

Should I wait until I get my DP installed before going to a Stage 2 OTS map?

[Mr Wilson]

Yes, will be worth the wait!

[Turok]

Yes, will be worth the wait!

Alright I'll wait until Saturday.. man I can't wait to get that thing installed!!

[boyracer]

Alright I'll wait until Saturday.. man I can't wait to get that thing installed!!

Where are you planning on installing the DP?

[Turok]

Where are you planning on installing the DP?

I'll probably be installing at Bluestreak's.

[Fobio]

This is being reported on MSF. Either we're not affected or not many of us updated as yet to the latest ATR/maps. If we start to hear more, I'll start a new trhead to discuss it:

MSF LINK: Hesitations/ stumbling on latest updates
(http://www.mazdaspeedforums.org/forum/f331/hesitations-stumbling-latest-updates-114714/)

[Mr Wilson]

Not currently updated. Have some stuff to finish on the car before uploading so will most likely have to wait until I'm back from vacation.

That, said sure is nice the Speed community has Cobb representation that is willing to help.

[loki]

My car has been shuddering if I'm cruising around in 5th or 6th gear, apply pedal and then release.

This is around the 3500 rpm range as the car begins to build boost

[Booostin]

My car has been shuddering if I'm cruising around in 5th or 6th gear, apply pedal and then release.

This is around the 3500 rpm range as the car begins to build boost

Same here

[Fobio]

My car has been shuddering if I'm cruising around in 5th or 6th gear, apply pedal and then release.

This is around the 3500 rpm range as the car begins to build boost


Not currently updated. Have some stuff to finish on the car before uploading so will most likely have to wait until I'm back from vacation.

That, said sure is nice the Speed community has Cobb representation that is willing to help.


Same here

Someone check with Simon. I have not been able to pinpoint the culprit. It MIGHT be tuning related. Keep them coming!

[loki]

mine is probably something different, because it was doing that from before the update

[boyracer]

I haven't notice anything myself. Will have to pay more attention.

[boyracer]

.... I'm sure I would have noticed.

[Fobio]

So the talk on MSF is that it affects mainly 2010 MS3, but with all other speeds reporting something similar. It needs to be said, as loki have alluded to, that none of it may be related. I'll keep an eye out and see what's up. In the meantime, David@Cobb is on the issue so keep checking the thread on MSF for updates. I have a couple of theories tho....

[fywdyl]

So the talk on MSF is that it affects mainly 2010 MS3, but with all other speeds reporting something similar. It needs to be said, as loki have alluded to, that none of it may be related. I'll keep an eye out and see what's up. In the meantime, David@Cobb is on the issue so keep checking the thread on MSF for updates. I have a couple of theories tho....

^ this is what I was talking about earlier! Doesn't happen all the time, but when it does, it's around 3K - 3.5K.

[Fobio]

^ this is what I was talking about earlier! Doesn't happen all the time, but when it does, it's around 3K - 3.5K.

Thank you Anson!

EDIT: assuming that Simon really hasn't felt any of it, it leads me to assume that this can be "tuned" away...let me know when you're free to come by. ;)

[fywdyl]

Thank you Anson!

EDIT: assuming that Simon really hasn't felt any of it, it leads me to assume that this can be "tuned" away...let me know when you're free to come by. ;)

Cool, I'll take up your offer!

[boyracer]

Just got back from work, took the Hwy home and felt nothing at the 3000-4000 rpm range in 4th or 5th. I'll keep you boy's posted for the next few days.

[Fobio]

Just got back from work, took the Hwy home and felt nothing at the 3000-4000 rpm range in 4th or 5th. I'll keep you boy's posted for the next few days.

Thank you Simon!

[loki]

HID reverse lights: because every time I am reversing I want the people around me to think there's an alien invasion

[loki]

just in case you ship your car somewhere super dark at night like the Serengeti, and you want to see that pride of lions 4km behind you while you're backing up

[boyracer]

HID reverse lights: because every time I am reversing I want the people around me to think there's an alien invasion


just in case you ship your car somewhere super dark at night like the Serengeti, and you want to see that pride of lions 4km behind you while you're backing up

I thought you went loopy there for a second, then I saw the thread. That's ridiculous.

[Elusivellama]

I thought you went loopy there for a second, then I saw the thread. That's ridiculous.

The pictures blind me just by looking at them. HID reverse lights, when you don't want people to know whether you're in first or reverse.

Also... fackin' rear sway bar collars. They came loose, lost one half of one collar and 3 allen bolts. Sway bar is creaking in discontent now. When I get my replacement and put them back together, I'm coating the sh*t out of them with loctite. Anybody know where to find one, other than getting another from Jamie?

[Fobio]

The pictures blind me just by looking at them. HID reverse lights, when you don't want people to know whether you're in first or reverse.

Also... fackin' rear sway bar collars. They came loose, lost one half of one collar and 3 allen bolts. Sway bar is creaking in discontent now. When I get my replacement and put them back together, I'm coating the sh*t out of them with loctite. Anybody know where to find one, other than getting another from Jamie?

ackland-grainger and the like...industrial hardware stores. I also know one in Scarborough, but I know you're you're in KW.

[Elusivellama]

Thanks Vince, there appears to be one in Cambridge! Gonna go there tomorrow.

[horto]

just in case you ship your car somewhere super dark at night like the Serengeti, and you want to see that pride of lions 4km behind you while you're backing up

Don't joke about this, I have pics of a similar situation in South Africa from 6 months ago. Will post pics when I sober up and am back in the 416. But they were more like 4m behind us. ****ing lions.

[zzz3]

Don't joke about this, I have pics of a similar situation in South Africa from 6 months ago. Will post pics when I sober up and am back in the 416. But they were more like 4m behind us. ****ing lions.

this is a joke.

http://www.youtube.com/watch?v=4Is1N_-LVE4

your just frightened (easily).

[-cj-]

From the last NATOR install day... Dave didn't quite finish working on his MS3, so in true Portuguese fashion, he backed the Porsche out of the way so he could get to this bad boy:

http://www.clubnet.org/~clave/TM3/dave2.jpg
http://www.clubnet.org/~clave/TM3/dave1.jpg

[boyracer]

@ zzz3, (World's smallest car Peel P50 vs Lions), that was f**king funny. Nice find.

[Turok]

From the last NATOR install day... Dave didn't quite finish working on his MS3, so in true Portuguese fashion, he backed the Porsche out of the way so he could get to this bad boy:


And this puppy is turbo charged :chuckle

[BlueStreak]

From the last NATOR install day... Dave didn't quite finish working on his MS3, so in true Portuguese fashion, he backed the Porsche out of the way so he could get to this bad boy

Turbocharged and AWD. Nobody wants to race me.

[loki]

Turbocharged and AWD. Nobody wants to race me.

sounds like a speed6...

is the turbo a top mounted BT?

[Marta]

From the last NATOR install day... Dave didn't quite finish working on his MS3, so in true Portuguese fashion, he backed the Porsche out of the way so he could get to this bad boy:

http://www.clubnet.org/~clave/TM3/dave2.jpg
http://www.clubnet.org/~clave/TM3/dave1.jpg

bahahaha, truely Portugese indeed!

[BlueStreak]

sounds like a speed6...

is the turbo a top mounted BT?

Right now, its stock turbo. I was bouncing some BT ideas off Turok and -cj-. We might NATOR install my 3071 into it this weekend so I can drop in something bigger into my Speed.

Just discovered this website: Racecar Engineering (http://www.racecar-engineering.com/). Probably old hat for some but I expect today to be very unproductive.

[Turok]

Right now, its stock turbo. I was bouncing some BT ideas off Turok and -cj-. We might NATOR install my 3071 into it this weekend so I can drop in something bigger into my Speed.

Just discovered this website: Racecar Engineering (http://www.racecar-engineering.com/). Probably old hat for some but I expect today to be very unproductive.

I think we gotta upgrade the RMM as well... may some slicks too.

[Mr Wilson]

Great magazine, sold it at my old work. 99.9% of it was over my head, colour pics were nice.

[Elusivellama]

The pictures blind me just by looking at them. HID reverse lights, when you don't want people to know whether you're in first or reverse.

Also... fackin' rear sway bar collars. They came loose, lost one half of one collar and 3 allen bolts. Sway bar is creaking in discontent now. When I get my replacement and put them back together, I'm coating the sh*t out of them with loctite. Anybody know where to find one, other than getting another from Jamie?


As a follow up to this... you can find these things (2 piece clamping collars) at Spaenaur. $15 for one set (one clamping collar)... wtf. Do yourself a favor, check these fvckers to make sure they're tight and ditch those pansy ass 1/4" - 28 x 3/4"screws they come with. Get 1/4" - 28 x 1" long screws and smear them with loctite. Going to put them in tomorrow...

[loki]

As a follow up to this... you can find these things (2 piece clamping collars) at Spaenaur. $15 for one set (one clamping collar)... wtf. Do yourself a favor, check these fvckers to make sure they're tight and ditch those pansy ass 1/4" - 28 x 3/4"screws they come with. Get 1/4" - 28 x 1" long screws and smear them with loctite. Going to put them in tomorrow...

longer pieces are a great idea

mine were almost dropping out the first time I checked them. I'll check them again to make sure they're still in there good.

[cSPEED]

http://www.mazdaspeedforums.org/forum/f293/high-pitched-squeal-cold-start-115579/

Can anyone chime in?

I've been trying to get a video but it hasn't been as cold as the night it happened (it was like 14C that night) so my car hasn't made the sound. I'm pretty sure it only happens when it's cold since it hasn't happened since.

[standsideways]

upload a video or something.

if you cant get it to happen when its warm out then youll have to wait.

how many kms? belts replaced?

[cSPEED]

There's no video cause my car hasn't made the noise since. Will have one up when it does.

[fywdyl]

There's no video cause my car hasn't made the noise since. Will have one up when it does.

Do you have an upgraded fuel pump? Does it make a high pitch squeaking sound? (kinda like an old photocopier)

If so, you can tune that away with the AP.

[cSPEED]

Hm I do have ptp internals but the aound is super loud and constant but only while the cArs in motion. Its loud enough to be heard over blasting music inside the car. Its a distinct metal on metal rubbing sound and only happened for about 30 sec till the car was warm.

[Fobio]

Hm I do have ptp internals but the aound is super loud and constant but only while the cArs in motion. Its loud enough to be heard over blasting music inside the car. Its a distinct metal on metal rubbing sound and only happened for about 30 sec till the car was warm.

You should talk to Dave and ask him to "finger" your chain.

[BlueStreak]

You should talk to Dave and ask him to "finger" your chain.

That was our secret!

[Mr Wilson]

Well I don't know what that means, but I like where this is headed.

[loki]

I haz many mazdaz

[loki]

Well I don't know what that means, but I like where this is headed.

you haz to finga fuhk the chain to know if it's fuhked up

[cSPEED]

That was our secret!

Dearest Dave,

Will you do the honor of fingering my chain?
:chuckle

[Snotrocket]

where would be the best place to find supplies to custom build a larger intake.. also in need of a big MAF

[Fobio]

where would be the best place to find supplies to custom build a larger intake.. also in need of a big MAF

my shit is coming out soon time if you can wait...if not...talk to Dave ....theme of the day...

well, talk to CelestSpeed3/Paul as well...

sometimes I wish it was a chick named Celeste that wrenches on my car...

[Snotrocket]

my shit is coming out soon time if you can wait....

Timeframe?

[Fobio]

Timeframe?

hopefully a week...it's also tapped for reirc for dual OCC setup to vent the valvecover, esp important for BT. I got it new from CP-e...the setup was like close to $500.

[Snotrocket]

cool... diameter ?

[CelestSpeed3]

I think it's either 3.25ID or 3.5"OD. Either way it will suit your needs.

[Snotrocket]

I don't want to dial the boost up on my 3 inch inlet.. will another 1/4 inch make that much of a difference?

[Fobio]

I don't want to dial the boost up on my 3 inch inlet.. will another 1/4 inch make that much of a difference?

The MAF housing of the CP-e is 3.25". the inlet itself states it's a 3" cross-section throughout as it's more like a chamber than a 3" pipe. here's a link:

http://www.cp-e.com/products/mazdaspeed3-gen1/mzr-23-disi-nviscid%E2%84%A2-pipe

[Addison]

A place called D'muffler Mechanix man a custom turbo inlet for me. He does a ton of custom exhaust and pipe work.

Good guys: http://www.dmufflermechanix.ca/Services.html

[BlueStreak]

Dearest Dave,

Will you do the honor of fingering my chain?
:chuckle

I will... but I'm going in dry...


I don't want to dial the boost up on my 3 inch inlet.. will another 1/4 inch make that much of a difference?

Ideally, you want to keep the intake tract - up to the turbo - as large as possible (in our case 4") so that the turbo doesn't have to inherently run a higher pressure ratio to give you your desired boost.

For example,

You want 20 PSI manifold pressure (boost). Assuming you have a restrictive inlet/intake, the turbo will have to work harder on the inlet side (maybe 22PSI worth or something).

I'm holding the pressure drop on the post turbo side constant at whatever it is given your intercooler setup.

[Elusivellama]

longer pieces are a great idea

mine were almost dropping out the first time I checked them. I'll check them again to make sure they're still in there good.

When you check the clamping collars, also check the bracket bolts and the end link nuts. The end links on my sway bar were so loose you could twist them with your fingers. Had the car up on a hoist and (using the allen key to hold the nut in place) tightened the fvck out of them - way better to torque them tight on a hoist than to lie on your back under the car trying to tighten them that way.

[loki]

When you check the clamping collars, also check the bracket bolts and the end link nuts. The end links on my sway bar were so loose you could twist them with your fingers. Had the car up on a hoist and (using the allen key to hold the nut in place) tightened the fvck out of them - way better to torque them tight on a hoist than to lie on your back under the car trying to tighten them that way.

I checked all those already. they were still torqued the way we set them

50 lbs of torque is 50 lbs whether the car is up on a hoist, you're on the ground, you get a skank to do it, once the torque wrench clicks at the torque setting, you're good to go.

but it would be a hell of alot easier on a hoist....

[Elusivellama]

I got it at 50lbs torque last time or whatever the JBR instructions recommended, using a torque wrench. Clicked off and everything. Still came loose... might be a result of the clamping collars coming loose and allowing the bushings to move back and forth.

[fywdyl]

I got it at 50lbs torque last time or whatever the JBR instructions recommended, using a torque wrench. Clicked off and everything. Still came loose... might be a result of the clamping collars coming loose and allowing the bushings to move back and forth.

Must be from all that Krown you had under your car... ha ha.

[BlueStreak]

Chris, check the nuts that fasten the strut hat onto the strut shaft in the engine bay. Mine came loose on my yellows and made some wicked clunking sounds.

[loki]

Chris, check the nuts that fasten the strut hat onto the strut shaft in the engine bay. Mine came loose on my yellows and made some wicked clunking sounds.

my noise is definitely coming from the back right wheel hitting the bumper

and the evidence is on the bumper. Pieces of my R-S3.....pieces of my badass wheel.

[-cj-]

Fender flares.

http://i211.photobucket.com/albums/bb19/shaeffer_ryan/JMI/IMG00277.jpg

[Thrizzl3]

^^^^
that looks horrible..

[loki]

no...

[-cj-]

Just think. With that wide body kit, your bumper will never pop off near the headlight....

[Fobio]

^^^^
that looks horrible..


no...

if I did that it'd not be for looks...

having said that, if I did do that I'd hope to have the results looks a bit better...

[-cj-]

In before Vince starts running 315's

[Snotrocket]

Fender flares.

http://i211.photobucket.com/albums/bb19/shaeffer_ryan/JMI/IMG00277.jpg

Awesome! I kinda like it!

[Thrizzl3]

In before Vince starts running 315's

Paul/Celeste would want to go wider then lol..NATOR Fender Flare install?

[boyracer]

It's a little too much.

[Fack_Dude]

That shit is the bomb.

[rzapata]

Why is people hating on the widebody kit? :chuckle That thing's done the way it should be done so it's all good... To me at least. :)

[Thrizzl3]

need to get my boost gauge installed...soon..

[rzapata]

need to get my boost gauge installed...soon..

If you're gonna do it on your own, you might want to replace the clear straw with something better. One of those black vacuum lines instead... Jimmy didn't use that thing because he says that it didn't seem to have good quality. Also, he used a fair bit of extra wires because the package didn't have enough..

[CelestSpeed3]

315's are perfect for this car. I'd run 17x12's. The only issue is you cannot run the fender liners at all.

I tired it out with 2" spacers already . . . . Good news is that it doesn't rub the inside of the car. :)



EDIT: to be perfectly honest, I'd keep the 255's in the rear and flare the front only with 315's.

Then we can do weekly axle swaps. Good thing with the LSD you can still drive around if you snap one.

[-cj-]

Hahah... Paul, I DARE you to do it. I think that would be bad ass. Traction issues? What's that?

[CelestSpeed3]

I will do it, That's why I test fitted it already. I just couldn't find fender flares that fit. The other issue is that 17x12's are hella expensive. So realistically I would settle for 295's on a 17x10. I would lose some turn in feel but with enough camber the car won't care.

[-cj-]

Custom flares. :) ... I probably shouldn't be encouraging you, huh?

[CelestSpeed3]

Custom is easy to say, harder to do.


I looked into a few universal ones from extreme dimensions but I couldn't get the dimensions . . . Go figure.

[rzapata]

I'm sure it can be done if you really need to do it. Midnightfxgt has done it and is, so far, the only Mazda 3 I know that's got a custom widebody kit. His thread showed the steps he had to take to get it done. It seemed very tedious but doable. Also, his is a lot cleaner than that silver speed..

[standsideways]

SWAS again!

3rd gear, no ifs, ands, or buts about it.

Garbage.

Foot to the floor in third gear coming out of the last corner at shannonville, cuts boost untill the wheel is DEAD STRAIGHT then BOOM IVE GOT POWER.

Time to get rid of it : /

[alhope34]

I got new spark plugs today as per Vincent's advise from a few weeks ago and it would seem my car has no more hesitation or studdering at all at WOT in 3rd+. =) I was trying all the way home from Nextmod (installed them there) and it wouldn't happen when normally it would be every time I hit WOT in those gears once the turbo spooled up.

Thanks for the advise!

[breakfasteatre]

good advice ;)

[boyracer]

http://bravellir.com/gallery/d/6769-2/CAAO8XFQ.gif

[alhope34]

Lol, yea. Who knew that plugs with only 25-30k kms on them would have been bad already. Usually they are supposed to last 120k kms or so.

[Fobio]

SWAS again!

3rd gear, no ifs, ands, or buts about it.

Garbage.

Foot to the floor in third gear coming out of the last corner at shannonville, cuts boost untill the wheel is DEAD STRAIGHT then BOOM IVE GOT POWER.

Time to get rid of it : /

or you know...get a tune that works...


I got new spark plugs today as per Vincent's advise from a few weeks ago and it would seem my car has no more hesitation or studdering at all at WOT in 3rd+. =) I was trying all the way home from Nextmod (installed them there) and it wouldn't happen when normally it would be every time I hit WOT in those gears once the turbo spooled up.

Thanks for the advise!

no problem Al! glad to see you enjoying the car again!

[boyracer]

http://bravellir.com/gallery/d/6769-2/CAAO8XFQ.gif

The face-palm was towards the dreaded "SWAS". LOL. I doubt that it's SWAS, but as Fobio pointed out a proper tune is needed if you have an AP.

[CelestSpeed3]

I was just at the Sigma OTA and Alex was having some odd issues coming out of the corners.

Turn out a clamp on a boost tube was so loose it slid right down the coupling.

[breakfasteatre]

lol, i lost all boost again on my second timed lap. Clamp is possibly bad, as it slipped off again doh!

[loki]

http://www.torontomazda3.ca/forum/showthread.php?63185-FS-2007-Mazdaspeed3-Crystal-White-Pearl&p=956650&viewfull=1#post956650

This will be the next muther***ker to buy some cheap clapped out speed and then be begging us all for help


Love when someone tries to sell a speed3 on the forum. Always brings the idiots out of the woodworks to comment

[loki]

If only the speed3 was red....

If only it wasn't modded....

If only it was $8,000....

If only you would Stfu

[Booostin]

Loki when he reads comments



http://i445.photobucket.com/albums/qq176/bobbert4ever/rage.gif

[loki]

Indeed

[Elusivellama]

Or even just trying to sell speed wheels....

[zzz3]

http://www.torontomazda3.ca/forum/showthread.php?63185-FS-2007-Mazdaspeed3-Crystal-White-Pearl&p=956650&viewfull=1#post956650

This will be the next muther***ker to buy some cheap clapped out speed and then be begging us all for help


Love when someone tries to sell a speed3 on the forum. Always brings the idiots out of the woodworks to comment


If only the speed3 was red....

If only it wasn't modded....

If only it was $8,000....

If only you would Stfu


Or even just trying to sell speed wheels....

laissez-faire.
http://img440.imageshack.us/img440/7245/naearn8o0embfnbhy7qllq2.jpg

[Marta]

Loki when he reads comments



http://i445.photobucket.com/albums/qq176/bobbert4ever/rage.gif

bahahahahha

[cSPEED]

You guys think I can run with no skidplate? After Saturday I couldn't get it back on properly because the bolts were too rusted and broke off when I was removing them. Just 1 was left and it fell apart so I had to saw it off this morning before work. Do I really need a skid plate? People on MSF seem to think not but just to be safe. I guess I'd go Corksport as it's just a little more than OEM and it's aluminum.

[breakfasteatre]

first the skid plate, then the floorboard rivets. then the manifold


that shit is critical

[loki]

my car hates esso

[CelestSpeed3]

You guys think I can run with no skidplate? After Saturday I couldn't get it back on properly because the bolts were too rusted and broke off when I was removing them. Just 1 was left and it fell apart so I had to saw it off this morning before work. Do I really need a skid plate? People on MSF seem to think not but just to be safe. I guess I'd go Corksport as it's just a little more than OEM and it's aluminum.

I haven't ran the skidplate in a long time. I got tired of taking it off all the time. Not only that but it conceals leaks early on, so you find out about them when they are really bad.

[abstrakt]

well well well i havent posted on the forum in a while so i might aswell make a granndddd entrance lmao... eff that i am too lazy...celest is had fun talking to you and learning a bit more about our cars hahah..convo was good but the rain sucked..have to get together agian soon!!

[cSPEED]

I haven't ran the skidplate in a long time. I got tired of taking it off all the time. Not only that but it conceals leaks early on, so you find out about them when they are really bad.

Well that makes me feel better about it, thanks. Do you DD though? Drive with no skidplate in the winter?

[boyracer]

Skidplates are for pussies!

[Booostin]

Well that makes me feel better about it, thanks. Do you DD though? Drive with no skidplate in the winter?

I took mine off too. I will put it back on for the winter.

[loki]

I keep my skid plate on thanks

[Booostin]

Some people have said it achieves cooler intake temps but I have yet to test that. Don't think that really matters anyway.

[Turok]

I keep mine on aswell, it only takes a min to take off.

[loki]

I keep mine on aswell, it only takes a min to take off.

Ask Boyracer if it takes a minute to take off

:chuckle

[rzapata]

I keep mine in.. Think about it, that thing is the only barrier between crap on the road (rocks, etc) and the bottom of the engine, especially the oil pan. I'll continue to keep mine in just to be safe.

[Turok]

Ask Boyracer if it takes a minute to take off

:chuckle

Well he might have issues with his, mine only takes a min to take off :)

[loki]

Well he might have issues with his, mine only takes a min to take off :)

No I know

It's a joke between a few of us, we almost had to cut it off

[Thrizzl3]

No I know

It's a joke between a few of us, we almost had to cut it off

he was ready to rip it off....lol never heard him swear so much :chuckle

[Elusivellama]

Those cheapass retaining clips from Mazda are two piece and spot welded together. When they rust, the two pieces break free but spin around on themselves so that you can't use a socket wrench to remove the bolt. There are updated one piece clips that Mazda sells, but they're hella expensive for what they are (like $2 a clip or some shit).

[Fack_Dude]

I keep mine in.. Think about it, that thing is the only barrier between crap on the road (rocks, etc) and the bottom of the engine, especially the oil pan. I'll continue to keep mine in just to be safe.

Thanks for the pro tip of the day. :winner lol

[boyracer]

No I know

It's a joke between a few of us, we almost had to cut it off


he was ready to rip it off....lol never heard him swear so much :chuckle


I must have spent over an hour trying to get that f**king thing off.

[rzapata]

Thanks for the pro tip of the day. :winner lol

I got a couple more tips but I'll save those for some other day. :chuckle

[loki]

I got a couple more tips but I'll save those for some other day. :chuckle

give him some tips on how not to be an a$$hole

I need to rub off on him more

[Elusivellama]

I must have spent over an hour trying to get that f**king thing off.

The next time you get that thing off, make sure you have a bunch of clips to swap the shitty rusted Mazda ones out. Mazda sells that updated one piece clip, but I think you can find them at home despot.

[Booostin]

give him some tips on how not to be an a$$hole


That is irreversible

[cSPEED]

Those cheapass retaining clips from Mazda are two piece and spot welded together. When they rust, the two pieces break free but spin around on themselves so that you can't use a socket wrench to remove the bolt. There are updated one piece clips that Mazda sells, but they're hella expensive for what they are (like $2 a clip or some shit).

Exactly my problem. The bolts all rusted off and broke inside the housing. The last one was cross threaded and wouldn't come out or break off so I had to saw the ****ing thing off as it was dragging on the ground. It's not that I want to remove it, it's that I have no choice and am putting off buying a new one. That's why I asked.

[Turok]

Hey can anyone give me a hand, I have a stock pump I need to get to MPS this week. Can anyone meet me in Vaughan area later tonight or tomorrow and give it to MPS or drop it off at Jimmys if your going to be in the area?

[rzapata]

give him some tips on how not to be an a$$hole

I need to rub off on him more

It'd be a different dude then.. It's not gonna be Fack_Dude anymore.. Maybe Just_Dude. :chuckle

[S.F.W.]

Hey can anyone give me a hand, I have a stock pump I need to get to MPS this week. Can anyone meet me in Vaughan area later tonight or tomorrow and give it to MPS or drop it off at Jimmys if your going to be in the area?
I can do it. Pm coming

[Turok]

I can do it. Pm coming

Thanks buddy

[Fack_Dude]

give him some tips on how not to be an a$$hole

I need to rub off on him more


:thumbsup

[Lockdown]

Hey can anyone give me a hand, I have a stock pump I need to get to MPS this week. Can anyone meet me in Vaughan area later tonight or tomorrow and give it to MPS or drop it off at Jimmys if your going to be in the area?

How far in woodbridge are you? I have mine to get to him, being in woodbridge you may be even closer than me, depending on where

[Turok]

How far in woodbridge are you? I have mine to get to him, being in woodbridge you may be even closer than me, depending on where

It's not that I'm far I just don't have the time to drive out that way this week. PM me.

[zzz3]

ohai guise,

jush whan tu sey bewear af dah 'glk350 chinese lease special' (sic):
http://forums.redflagdeals.com/ahhhhhhhhhhhhhhhh-brand-new-car-woman-pulls-front-me-slams-brakes-1188996/

[fywdyl]

ohai guise,

jush whan tu sey bewear af dah 'glk350 chinese lease special' (sic):
http://forums.redflagdeals.com/ahhhhhhhhhhhhhhhh-brand-new-car-woman-pulls-front-me-slams-brakes-1188996/

Sorry to hear Alex... unfortunately, according to the fault determination rules, you will be deemed at fault in this case. The reason(s) why you would want to go through insurance are:

a) you can't afford to pay for the dmgs
b) you worry that she will "chinese neck pain special" you in the future

[Turok]

Damn Alex that sucks b@llz.

I'm picking up a dash cam as soon as that GB happens on Redflag.

[zzz3]

i would wait till the summer has passed before getting a blackvue. as it gets consistently warmer, it will be interesting to see how many fail due to overheating (a problem with blackvues). in the mean time it is probably a good idea a cheap ~$50 camera, as it could save you $1500 in the long run.

and if alex did have the camera, i think he might of had a case for unsafe lane change or something along those lines, but without a camera, he is 100% at-fault for rear ending the car...sucks.

[rzapata]

Oh man, Alex's just getting all the luck in the world... Sorry to hear about this.. If anything, you should not be paying for painting the bumper as there isn't any "visible damage. Did you take pictures though of the deemed no visible damage? I guess if you have the proof and stuff, you can probably get away without paying for the repaint. Would have been good if there's a supporting police report.. In the end it will come down to how you can support your claims.

[Lockdown]

Sucks. I was rearended last fall and was somehoiw charged lol. Do what you can to minimize the pain to both your insurance and pocketbook.

[boyracer]

F**k!!!! Sorry to hear Alex. That really really sucks!

[loki]

this news is so 2 days ago fellas

[breakfasteatre]

posting that link in here was an attempt to be funny,

beige glk350 = light blue bmw 323

' U NO IT MERCEDES, IT EXPENSIVE!'

update: ended up going through insurance, doubt they will reverse the decision that im at fault, but now, i dont give a shit. **** toronto

[zzz3]

bro you destroyed her car...

[boyracer]

?

[-cj-]

Why was that cross posted? What was the intention?

[J_Logik]

Damn Alex, the only breaks you're getting right now are bad ones!!

[abstrakt]

anybody have a spare pass side motor mount laying around..? that i could..a...borrow?

[CelestSpeed3]

Ya I have a stock one.

[Elusivellama]

http://i853.photobucket.com/albums/ab96/Elusivellama/1db7f525.jpg

What I saw this morning when heading to work. Didn't know Cracker Jack was still giving out driver licenses in the cereal boxes. It was a minivan.

[fywdyl]

Back from Vegas boys.... guns, bitches and booze

[BlueStreak]

Back from Vegas boys....

*sniff sniff*

I smell hooker...

[Thrizzl3]

Back from Vegas boys.... guns, bitches and booze

ohh so that is where you were..lol

[rzapata]

Back from Vegas boys.... guns, bitches and booze


*sniff sniff*

I smell hooker...

^^ Apparently, what happens in Vegas did not stay in Vegas. :chuckle

[loki]

Herpes is for life

[Marta]

^^ Apparently, what happens in Vegas did not stay in Vegas. :chuckle

:chuckle +1

[fywdyl]

*sniff sniff*

I smell hooker...


^^ Apparently, what happens in Vegas did not stay in Vegas. :chuckle

Sorry to disappoint, no hookers... what you smell is prob the strippers...

Was suppose to go back to work yesterday, but of course, that didn't happen.

Phil, get the hell off the econo map.

[J_Logik]

Sorry to disappoint, no hookers... what you smell is prob the strippers...

Was suppose to go back to work yesterday, but of course, that didn't happen.

Phil, get the hell off the econo map.

^^^Sounds like Ironhide got all lubed up!!:P Please tell me you took some snaps of the action?!?!

[Elusivellama]

As true TF fans (which I'm assuming you two are) what do you think of the Michael Bay movies? Honest question.

[Turok]

As true TF fans (which I'm assuming you two are) what do you think of the Michael Bay movies? Honest question.

I'm a true TF fan as well.. and they first movie was ok, the rest are so so.. (my whole network is named after decepticons, as well as my website :D )

[Thrizzl3]

^^^Sounds like Ironhide got all lubed up!!:P Please tell me you took some snaps of the action?!?!

Hahahahahaha only Jason

[fywdyl]

^^^Sounds like Ironhide got all lubed up!!:P Please tell me you took some snaps of the action?!?!

No pics = no evidence
My boys took a few pics at the gun range, but that's it.


As true TF fans (which I'm assuming you two are) what do you think of the Michael Bay movies? Honest question.

Not too bad... it's hard to cram all that story into a 2 hr film.


I'm a true TF fan as well.. and they first movie was ok, the rest are so so.. (my whole network is named after decepticons, as well as my website :D )

I agree with Adam, 1st was OK, rest were too much. And Bumblebee is not a whiny little bitch.

Speaking of TF... they're updating the old Soundwave toy and it looks AMAZING!!!

[Turok]

Speaking of TF... they're updating the old Soundwave toy and it looks AMAZING!!!

Sweet, Soundwave was one of my favs, but all time fav is Devastator aka Constructicons .. checkout Devastator.ca I snagged this cool picture off the web.

[Elusivellama]

That's what I thought......between all the humping robots, swinging scrotums, hash browns, Scott Witwicki always yelling and screaming "OPTIMUSSSSSSSSSSSSSSSSSS RAAAR RARARARRRRAA", Bumblebee missing his speech processors so that he seems more like a dog than a technologically advanced robotic lifeform, Optimus with a mouth, insect-like Decepticons, TFs with wheels for feet, Baysplosions and far too much product placement - there is something of value in there. Somewhere.

Then I watch the original TF movie and I'm reminded of how much more awesome it will always be...

[rzapata]

This one? :chuckle

http://upload.wikimedia.org/wikipedia/en/thumb/f/f1/Soundwaveboxart.JPG/240px-Soundwaveboxart.JPG

Screw soundwave. I like how they upgraded Shockwave on Dark of the moon.

http://t0.gstatic.com/images?q=tbn:ANd9GcRWMF2ZGk8Rd_-wN0JwKA09ql5eTmrbj9ojXpsZ1AHEefuAGibV

[S.F.W.]

guys, I know this is the random thread...but it's supposed to be random MS3 related chatter...

[loki]

guys, I know this is the random thread...but it's supposed to be random MS3 related chatter...

It's about random ms3 owner stuff too

Like Transformers!

[Elusivellama]

http://farm4.staticflickr.com/3642/3448621619_97009d8a2d_z.jpg?zz=1

?

[Turok]

?

Shockwave as a mazda? lol

[fywdyl]

guys, I know this is the random thread...but it's supposed to be random MS3 related chatter...

Last one Ami, I promise.
http://i923.photobucket.com/albums/ad78/fywdyl/SOC%20and%20Others/MP-13_edit.jpg

See what I did there? ;)

[fywdyl]

Shockwave as a mazda? lol

Yep, they also did Jazz as an RX-8... but enough OT.

[Thrizzl3]

Does it have pink fogs? Lol

[Turok]

Last one Ami, I promise.
See what I did there? ;)

Lol that's awesome, MS3 TF :)

[Mr Wilson]

I know there was battery talk before, but what was the answer for a decent replacement?

The car would struggle a little to start if it sat for a few days and after getting back from a trip last night (sat for 11 days), I had to jump it with the wife's car.

[Lockdown]

I know there was battery talk before, but what was the answer for a decent replacement?

The car would struggle a little to start if it sat for a few days and after getting back from a trip last night (sat for 11 days), I had to jump it with the wife's car.

Can't go wrong with an Optima. Definitely not the cheapest but one of the best.
I've noticed a lot more people requesting Optima batteries this summer.

[Lockdown]

http://farm4.staticflickr.com/3642/3448621619_97009d8a2d_z.jpg?zz=1

?

WOW, I had the metal version where he was a gun, when I was a kid.

Also have Grimlock as a S197 Mustang (metal as well) **** plastic

[J_Logik]

No pics = no evidence
My boys took a few pics at the gun range, but that's it.

Fair enough, didn't know that someone would be looking for evidence.

Not too bad... it's hard to cram all that story into a 2 hr film.

They were as good as you were going to get with Bay shooting the action. As far as combat scenes and camera angles, he's a genius, but for plot, patriotism and preservation of concept. I'd like to kick him in his Devastator wrecking b***s!!

I agree with Adam, 1st was OK, rest were too much. And Bumblebee is not a whiny little bitch.

Agreed on Bumblebee, but he was more adept than in the G1 cartoon.

Speaking of TF... they're updating the old Soundwave toy and it looks AMAZING!!!

Yes "Masterpiece" Soundwave will be joining the rest of my collection, the adult TF's have far more detail and articulation than any other line to come out since the originals and their solid as sh*t!!


That's what I thought......between all the humping robots, swinging scrotums, hash browns, Scott Witwicki always yelling and screaming "OPTIMUSSSSSSSSSSSSSSSSSS RAAAR RARARARRRRAA", Bumblebee missing his speech processors so that he seems more like a dog than a technologically advanced robotic lifeform, Optimus with a mouth, insect-like Decepticons, TFs with wheels for feet, Baysplosions and far too much product placement - there is something of value in there. Somewhere.

Then I watch the original TF movie and I'm reminded of how much more awesome it will always be...

+1,000,000 to this. Some of the best value came from Julie White b.k.a Mrs Witwicky, she was awesome in all of them, stole every scene she was in. MILFey too!!:chuckle.

Sorry Ami, but I couldn't have all those comments thrown in about TF without responding. As far as Mazda TF's was thrilled when Jazz became one, he is the lynch pin of both my Masterpiece/Alternators collection and my complete G1 one as well:D

[Fack_Dude]

http://i1076.photobucket.com/albums/w456/fast_dude/DSCI0701.jpg

Here is me and my .357 magnum. ;)

[Turok]

Nice what range do you go too?

[Mr Wilson]

Don't lie, that's the missus' gun. Is your Derringer in the UA fanny pack?

[Fack_Dude]

http://i1076.photobucket.com/albums/w456/fast_dude/DSCI0704.jpg

And my m16 assult rifle. Bad ass.

[Elusivellama]

Is that a Glock I see?

[fywdyl]

NATOR gun range meet????

[Fack_Dude]

Is that a Glock I see?

Yup.

[Turok]

And my m16 assult rifle. Bad ass.

I thought M16's were illegal in Canada? I'm assuming it's not registered? Is it semi or full?

[Elusivellama]

Yup.

Which? 17, 20 or 21

[Fobio]

Yup.

I want to shoot guns.

[Turok]

I want to shoot guns.

If you ever go to Vegas, this is the best gun range , I go almost every time I'm in Vegas. You can shoot almost any type of gun.

http://thegunstorelasvegas.com/try-one

[Fack_Dude]

I thought M16's were illegal in Canada? I'm assuming it's not registered? Is it semi or full?

Its legal and its semi auto.

[Fack_Dude]

Which? 17, 20 or 21

21

[Lockdown]

There's unrestricted, restricted and prohibited.
May fall in either restricted or more likely, prohibited. I haven't looked into prohibited at all, so I don't know many details on that

[Fack_Dude]

There's unrestricted, restricted and prohibited.
May fall in either restricted or more likely, prohibited. I haven't looked into prohibited at all, so I don't know many details on that

It will be a restricted firearm.

[Fack_Dude]

Faccckk a gun range. Me and the boyz live like hill billys at my cottage in buffalo. God bless america.

[Fobio]

Faccckk a gun range. Me and the boyz live like hill billys at my cottage in buffalo. God bless america.

ahem...I want to shoot guns...

[Turok]

Faccckk a gun range. Me and the boyz live like hill billys at my cottage in buffalo. God bless america.

Road trip to your cottage :)

[Fack_Dude]

ahem...I want to shoot guns...

;) we will do it up bro. You gots a passport?

[Fack_Dude]

Road trip to your cottage :)

Lets do.it up. Nator weekend.