mikey32235's ride thread

**mikey32235** · 10-31-2012, 10:43 AM

hey guys, i was bored and i put together a mod list for the spring time..
Full motor mount kit
gt3071r
fmic
2 stage clutch
cobb a/p
test pipe (res delete)

anyone else have any suggestions on what i should add? i have the fuel internals done, a lot of other supporting mods, any suggestions that would b great!

**Fack_Dude** · 10-31-2012, 10:49 AM

Originally Posted by mikey32235

hey guys, i was bored and i put together a mod list for the spring time..
Full motor mount kit
gt3071r
fmic
2 stage clutch
cobb a/p
test pipe (res delete)

anyone else have any suggestions on what i should add? i have the fuel internals done, a lot of other supporting mods, any suggestions that would b great!

Fack the gt3071 and get the bnr stage 3 turboslow. Way better turbo bro.

**mikey32235** · 10-31-2012, 10:57 AM

Originally Posted by Fack_Dude

Fack the gt3071 and get the bnr stage 3 turboslow. Way better turbo bro.

is that what you have? http://bnrsupercars.com/ stage 3 for $1100?

**Fack_Dude** · 10-31-2012, 10:57 AM

Originally Posted by mikey32235

is that what you have? http://bnrsupercars.com/ stage 3 for $1100?

No gtx 3076r.

**mikey32235** · 10-31-2012, 11:01 AM

oh, reason i want a 71 turbine is cause it spools faster 1000rpm sooner, bnr is better your saying?

**Fack_Dude** · 10-31-2012, 11:01 AM

One thing you need to know about big turbos is the danger factor is that your motor can blow without the proper tune. I have spent countless hours with mspeed tuning the car on the streets and also on the dyno. And tuning my car hasnt been cheap too.

**Fack_Dude** · 10-31-2012, 11:02 AM

Originally Posted by mikey32235

oh, reason i want a 71 turbine is cause it spools faster 1000rpm sooner, bnr is better your saying?

The bnr3 has quick spooling power like a gt2876. Yes, the bnr3 is a better alternative.

**mikey32235** · 10-31-2012, 11:08 AM

i see, what i was planning on doing is getting all the parts, installing them myself ( i can do it lol) and then bringing it to mspeed for a proper dyno and tune.. where is mspeed tuning anyways?

**loki** · 10-31-2012, 11:50 AM

Originally Posted by mikey32235

i see, what i was planning on doing is getting all the parts, installing them myself ( i can do it lol) and then bringing it to mspeed for a proper dyno and tune.. where is mspeed tuning anyways?

you're missing some stuff from that list.

I'll leave it up to you to figure out what's missing. Start by listing your current mods, then what you plan on adding for this turbo build.

**mikey32235** · 10-31-2012, 02:14 PM

Originally Posted by loki

you're missing some stuff from that list.

I'll leave it up to you to figure out what's missing. Start by listing your current mods, then what you plan on adding for this turbo build.

Current Mods:
Short ram intake
HPFP
BPV
Hypertech tune (will replace with the a/p)
Catless DP, 3 inch exhaust

Adding:

- Full Motor Mount Kit
- Gt2871r
- COBB a/p
- FMIC
- 2 Stage Clutch + flywheel
- Test Pipe
- Dyno and Tune at Mspeed
- Boost controler
- Boost cut killer
- HKS m series plugs
-

help me out loki lol

**mikey32235** · 10-31-2012, 06:10 PM

Originally Posted by Fobio

The dyno tuning that we do is done at APH.

And yes, you do need a lot of help on that list.

What else do you recommend?

**Fobio** · 10-31-2012, 06:14 PM

Originally Posted by mikey32235

What else do you recommend?

I recommend you read the Mod Path and decide for yourself what you'll need, instead of asking the "oh great Interwebs". None of us got to where we got cuz we listened to someone from the Internet...

**mikey32235** · 10-31-2012, 06:19 PM

will do, thanks fobio & Mr. wilson

**mikey32235** · 10-31-2012, 07:26 PM

Originally Posted by loki

This

Though if you give me 10 grand I'll organize all the parts and arrange for MSpeed to do install and dyno tune your car

ill keep that in mind for when i have ALL the cash aha! I'm capable of doing most of the mods myself, meth and turbo +tuning ill leave it up to mspeed.

**mikey32235** · 10-31-2012, 08:00 PM

Fobio, to install a stock turbo with all the internals of a gt2871R (from BNR), ACT 2stage clutch, and meth kit. Tune and Dyno how much would i be looking at?

**mikey32235** · 10-31-2012, 08:42 PM

lol I've already spent a sufficient amount, if i save enough and still have a good amount of cash on the side. ill b good!

**Fobio** · 10-31-2012, 08:47 PM

Originally Posted by mikey32235

Fobio, to install a stock turbo with all the internals of a gt2871R (from BNR), ACT 2stage clutch, and meth kit. Tune and Dyno how much would i be looking at?

Personally, I'd just get a GTX2871 and call it a day. Nothing wrong with the BNR solution, but having a spare turbo around is good insurance. Understand also that when you buy something from the manufacturer, like ATP, you also get the customer support that they offer to stand behind their products.

Overall, the cost of labour will be what I've quoted you already plus the extra time to assemble the turbo, install a meth kit and installing a clutch. One of the MSpeed guys will respond to you shortly.

Originally Posted by mazdaspeedemon3

here ya go read this... might change your mind lol

http://www.mazdaspeedforums.org/foru...-build-111788/

The thing is, ppl are now buying $15K MS3's...if you dump another $15K on top and do it smartly, you can have a 400+whp bulletproof wagon sleeper for $30K. We can make it happen...lol...but for us guys who've bought it new, it's best to take advantage of the 0% financing and amortize your path to a full build over the next few years.

**fywdyl** · 10-31-2012, 08:59 PM

Originally Posted by Fobio

Personally, I'd just get a GTX2871 and call it a day. Nothing wrong with the BNR solution, but having a spare turbo around is good insurance. Understand also that when you buy something from the manufacturer, like ATP, you also get the customer support that they offer to stand behind their products.

Overall, the cost of labour will be what I've quoted you already plus the extra time to assemble the turbo, install a meth kit and installing a clutch. One of the MSpeed guys will respond to you shortly.

The thing is, ppl are now buying $15K MS3's...if you dump another $15K on top and do it smartly, you can have a 400+whp bulletproof wagon sleeper for $30K. We can make it happen...lol...but for us guys who've bought it new, it's best to take advantage of the 0% financing and amortize your path to a full build over the next few years.

That's Vince for you. Solid modding/tuning advice AND financial advice.

**mikey32235** · 10-31-2012, 09:20 PM

Originally Posted by Fobio

Personally, I'd just get a GTX2871 and call it a day. Nothing wrong with the BNR solution, but having a spare turbo around is good insurance. Understand also that when you buy something from the manufacturer, like ATP, you also get the customer support that they offer to stand behind their products.

Overall, the cost of labour will be what I've quoted you already plus the extra time to assemble the turbo, install a meth kit and installing a clutch. One of the MSpeed guys will respond to you shortly.

The thing is, ppl are now buying $15K MS3's...if you dump another $15K on top and do it smartly, you can have a 400+whp bulletproof wagon sleeper for $30K. We can make it happen...lol...but for us guys who've bought it new, it's best to take advantage of the 0% financing and amortize your path to a full build over the next few years.

always have the right answer! well i already have an extra turbo (thats the one I'm gonna send out) so once i swap the 2871 in, ill have the stock one as a back up! i got it all planned out

**Fack_Dude** · 10-31-2012, 10:05 PM

Hey Mikey,

If I were you I would stay with the stock turbo and just go meth injection. I made 340 whp with the meth setup and the shit was stupid fast. My BT setup is fast but not stupid fast.

**mikey32235** · 10-31-2012, 10:10 PM

Originally Posted by Fack_Dude

Hey Mikey,

If I were you I would stay with the stock turbo and just go meth injection. I made 340 whp with the meth setup and the shit was stupid fast. My BT setup is fast but not stupid fast.

if i only tune for meth, i won't need half of the mods on there i guess right? and loki, i would have 1 spare (the one i would take out) and i have the 2871 (putting in) i don't know if u knew but i had a bad turbo lol, so id get that rebuilt with the 2871 build...

but i guess if u can make 340whp from meth, then id probably do that first. later on id still like to hit the 400whp mark one day!

ill defiantly think about it.

**mikey32235** · 10-31-2012, 10:34 PM

well if the meth install and tune can get me 340whp, and save me a lot of money, id rather do that now and wait until i feel like the turbo is no good anymore, then ill build 2871. any idea mspeed how much a meth install and tune is lol?

**mikey32235** · 11-07-2012, 01:38 PM

Hey guys, i just got my auto tech internals, any tips before installing it? I'm kind of nervous doing this aha. any advice would be great thanks!

**Snotrocket** · 11-07-2012, 02:07 PM

Originally Posted by mikey32235

Hey guys, i just got my auto tech internals, any tips before installing it? I'm kind of nervous doing this aha. any advice would be great thanks!

Just giver bud

**copycat10** · 11-07-2012, 02:12 PM

Originally Posted by mikey32235

Hey guys, i just got my auto tech internals, any tips before installing it? I'm kind of nervous doing this aha. any advice would be great thanks!

Hey mikey, I thought you ordered a CP-E HPFP? what made you change your mind?

Thread: mikey32235's ride thread

Thread Tools

Display