Yes Gen1 specifically
Yes Gen1 specifically


I think I still have my cnt exhaust but it doesn't have the muffler section. It is straight through.
So its not the whole piece?
http://www.mazdaspeedstore.com/mazda...09-p-425.html#
Which part would it be missing?
If you have the whole catbackmill come to sauga and buy it today.


That is the one I bought but let me check and see which parts I have because I know I removed the muffler. Ill let you know soon.
Thanks, and by muffler do you mean resonator or cat? It doesnt seem to come with a muffler. Either way as long as it maintains a 3" diameter im happy.
A, I'm trying to stop by, but I have somewhere to be until early afternoon (it is in the north end of the city so I should be able to). Can you PM the address and I'll do my best to make it.
Oh and to the others who responded regarding the alignment, Thanks. Between that and the shop feedback thread, I got the info I needed and have an appointment booked for next week.


Getting a custom exhaust on fridayIf I am free sunday I will swing by Nator and help out where I can since I will have no parts to install... need to wait for the JBR order and pick up my meth from fobio...


Hi All,
Installed Autotech internals and put a stage 2 map yesterday...I'm in LOVE!!!
Just thought I'd share...
Thanks,
Rob.


Hole In Block Tuning! I'll give you HIB.
2010 MS3 Black395whp/386wtq
| Molnar Rods | CP-e Stage 2 Pistons | Much Head Work | ATP GTX3076 | Tial 38mm EWG | HTP 4 Inch Intake | BSD | Passenger and Rear MM | Denso ITV22's | OCC | Ultimate Racing TBE | Tredstone TR8C FMIC | Tial BPV | Autotech Internals | Grimmspeed ECBS 3 port | Te37 Volks| 245/45/17 Dunlop zzi tires| Cobb AP Self Street Tuned | Sonic Tuning CO's | stoptech breaks and slotted roters |
Hey rob. Im running the exact mods as you except I have downpipeback exhaust. Just installed the autotech internals but I haven't switched to stage 2.
Hows the car running? My CPe DP wont fit with my DP back exhaust so im buying a catback exhaust. Im very eager to get my DP and FMIC soni can run stage 2.. A local caliber srt4 kept pulling on me, I could only catch up through turns.


I believe at least one deleted cat is required to run stage two....
http://velocityfactor.wordpress.com/...guide-stage-2/
Thanks,
Shawn
Last edited by Snotrocket; 05-03-2013 at 11:51 AM.



Nino, you running stock cat back? It will work with the cp-e downpipe.
0.000212524463 gigawatts
Hey, Im running a 3" downpipe back exhaust made by Vibrant. It replaces the stock cat. The cpe also replaces that lower cat so i wont bolt up with my exhaust.
Just got off the phone with garage16 I was about to drive down to pick up an HKS CBE but they had one left and its on hold![]()



What's up Shawn?