MS3Edge's F150/300 SRT8/Mustang/Tesla/ST/RS

[Timmyg]

Today at ST Thomas Dragway park

I wish I would have known you were coming down to Sparta I would have loved to see this car in person. I live pretty close to Sparta.

[MS3Edge]

I wish I would have known you were coming down to Sparta I would have loved to see this car in person. I live pretty close to Sparta.

Sorry I don't post as much here anymore. But I can let you know the next time

[Timmyg]

Sorry I don't post as much here anymore. But I can let you know the next time

Sounds good. I look forward to seeing the car someday. Are you from around this area?

[MS3Edge]

Sounds good. I look forward to seeing the car someday. Are you from around this area?

Nope Whitby

[Timmyg]

Nope Whitby

Wow that's quite the drive for our old track.

[MS3Edge]

Wow that's quite the drive for our old track.

Event was held by the shop that did the work on my car

[MS3Edge]

[Snotrocket]

12.1@118..... maybe practice driving a bit before you frame it...

[MS3Edge]

12.1@118..... maybe practice driving a bit before you frame it...

Perhaps.

[Snotrocket]

I'm just saying you should be able to run 11s no problem with that mph. The car is fast...

[Canadianbacon]

T/C on/off during that run?

[MS3Edge]

I'm just saying you should be able to run 11s no problem with that mph. The car is fast...

Street tires and a check engine light on every pass with a miss fire cause some slow downs. We are working through the tune and replacing the injectors as we think we have a faulty new injector. And then we will should be in the 11's. But I had to be artful with the miss fire. Spring will see better numbers as I also have a whole new cat back coming this week


Sorry I miss took your comment

Moderators please remove my comment. My bad

[MS3Edge]

T/C on/off during that run?

T/C was on but still spinning in 2nd gear

[Flagrum_3]

T/C was on but still spinning in 2nd gear

Ju need big fat sticky tires mang!

[MS3Edge]

Ju need big fat sticky tires mang!

I know. Lol

[MS3Edge]

Next steps. Higher flowing exhaust. And a wide band

[SomeGuy]

Even I have to admit that's a pretty cool build...nice power out of that car.

[MS3Edge]

Even I have to admit that's a pretty cool build...nice power out of that car.

Thanks. Appreciate that

[MS3Edge]

Ok been a few weeks. Bunch of updates. AF wideband is in and wired to my trinity for logging. Not just there for eye candy. Flowmasters are in. Issue with the misfire is resolved MSD coils in. New 65lb injectors in and new badging in.

[MS3Edge]

Next project is match the valve covers with the MSD"s. Paint bought and base coat applied

[MS3Edge]

And some footage front the streets of Mexico
Notice the smoke hovering on the field like fog on a nice brisk morning

[MS3Edge]

And last but not least. All cleaned after the Mexico run

[MS3Edge]

Next phase 3 pod pilar as I want to run fuel pressure. And the rear strut brace. For the trunk. Which means I may sell my 12" L7 in the box. Stay tuned.

[jonjon72]

This car is so much win.

[Default User]

Notice the smoke hovering on the field like fog on a nice brisk morning

I thought that was a lake LOL