Page 77 of 281 FirstFirst ... 2767757677787987127177 ... LastLast
Results 1,901 to 1,925 of 7019

Thread: Random MS3 Chat Thread

  1. #1901
    Sponsor
    BlueStreak's Avatar
    Join Date
    Oct 2007
    Posts
    1,183
    Thanks
    39
    Thanked 34 Times in 13 Posts
    Mentioned
    34 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Quote Originally Posted by rzapata View Post
    Thanks for the info Dave..

    Just another thing to clarify with oil pressure.. If for example, there's an oil leak somewhere, shouldn't the oil pressure decrease because there's less volume? Or is the effect of gravity negated since the oil is constantly moving within the system?

    Also, isn't the pressure related to temperature, which means that with an oil pressure gauge you're basically monitoring both?
    Oil leaks don't spontaneously show up. If you never touch the motor where oil is pumped through it, you'll never ever leak. Granted, you need to get your oil changed every X KMs so there's always a chance (and it has happened but is extremely rare). If you do happen to lose the motor shortly after an oil change, tow the car to Mazda, give them the keys to your car and have them replace the motor. It was their mistake and they should fix it (assuming Mazda changed your oil).

    If you swap in a bigger turbo, part of your due diligence is checking for leaks after the turbo was installed. You look from the top, crawl under, rev the engine, check again. Check again in a few days. If it isn't leaking now, it won't leak later.

    Pressure IS related to temperature. I have monitored oil pressure vs. coolant temperature many a time and notice a 5-10PSI drop in oil pressure as coolant temperatures surapass 200*F in stop and go traffic. You can expect the same effect if you're tracking the car. At the end of the day, it is not something to be worried about. The only time things become an issue is if oil pressure dips below 20PSI and at that point, it'll be 0 within a few seconds as there is something seriously wrong with the motor.

  2. #1902
    Sr Member rzapata's Avatar
    Join Date
    Jan 2011
    Location
    Downtown TO
    Posts
    4,502
    Thanks
    191
    Thanked 135 Times in 86 Posts
    Mentioned
    36 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Ok, thanks for clarifying further Dave.. I think this reinforces what I know so far.

  3. #1903
    Sponsor
    BlueStreak's Avatar
    Join Date
    Oct 2007
    Posts
    1,183
    Thanks
    39
    Thanked 34 Times in 13 Posts
    Mentioned
    34 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Quote Originally Posted by rzapata View Post
    Ok, thanks for clarifying further Dave.. I think this reinforces what I know so far.
    Snazz

  4. #1904
    Sponsor - Mspeed Tuning & Diagnostics
    MajesticBlueNTO's Avatar
    Join Date
    May 2004
    Posts
    3,287
    Thanks
    77
    Thanked 241 Times in 113 Posts
    Mentioned
    49 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    besides, we already have a ghetto oil pressure "gauge" in the oil pressure warning light which goes off when there is a catastrophic drop in oil pressure.

  5. #1905
    Sponsor - Mspeed Tuning & Diagnostics
    CelestSpeed3's Avatar
    Join Date
    Aug 2005
    Location
    Vaughan
    Posts
    1,409
    Thanks
    13
    Thanked 41 Times in 13 Posts
    Mentioned
    48 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    I think the stock oil pressure switch is set at 5psi.
    Want to work on your car but not sure how, send me a PM. Learn the way of Nator.

  6. #1906
    Member standsideways's Avatar
    Join Date
    Jan 2010
    Posts
    1,643
    Thanks
    13
    Thanked 1 Time in 1 Post
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default

    A g
    Se

  7. #1907
    Member Elusivellama's Avatar
    Join Date
    Feb 2010
    Ride
    2010 MS3 (black mica)
    Posts
    1,456
    Thanks
    10
    Thanked 12 Times in 10 Posts
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Oil siphon... anybody haz, or know where to buy one for super dirt cheap? For reducing the oil level in my engine, I think it's been overfilled by a little bit (roughly a little less than 1/4" above the Max mark).

  8. #1908
    Sponsor - Mspeed Tuning & Diagnostics
    Fobio's Avatar
    Join Date
    Jan 2008
    Age
    47
    Posts
    6,742
    Thanks
    663
    Thanked 456 Times in 178 Posts
    Mentioned
    173 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Quote Originally Posted by Elusivellama View Post
    Oil siphon... anybody haz, or know where to buy one for super dirt cheap? For reducing the oil level in my engine, I think it's been overfilled by a little bit (roughly a little less than 1/4" above the Max mark).
    MBNTO bot an oil pump/extractor a little while ago...

    MSpeed Tuning & Diagnostics - The Street Lab is always OPEN FOR BUSINESS
    All Powder & Ceramic Coating @ Quy's Coating . Tires and Wheels @ Simply Tire . Wraps by mleblond @ Seche Media . Dyno'd @ Advance Power House . Professionally Serviced by Jimmy @ Street Performance . Signature Pic by PCLoadLetter . Street Tuned by myself .
    "It is amazing how many drivers, even at the Formula One Level, think that the brakes are for slowing the car down." -- Mario Andretti

  9. #1909
    Member Elusivellama's Avatar
    Join Date
    Feb 2010
    Ride
    2010 MS3 (black mica)
    Posts
    1,456
    Thanks
    10
    Thanked 12 Times in 10 Posts
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    It's ok, I fixed it, thx Vince. As a side note, the oil already smells of fuel and it's been barely 500km since the oil change. Lowering my OCI down to like 5000 - 5500km as a result even on Rotella T6.
    Last edited by Elusivellama; 05-03-2012 at 06:31 PM.

  10. #1910
    Sponsor - Mspeed Tuning & Diagnostics
    Fobio's Avatar
    Join Date
    Jan 2008
    Age
    47
    Posts
    6,742
    Thanks
    663
    Thanked 456 Times in 178 Posts
    Mentioned
    173 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Quote Originally Posted by Elusivellama View Post
    It's ok, I fixed it, thx Vince. As a side note, the oil already smells of fuel and it's been barely 500km since the oil change. Lowering my OCI down to like 5000 - 5500km as a result even on Rotella T6.
    you're running rich...typical Gen2 stock or OTS tune.

  11. #1911
    Member Elusivellama's Avatar
    Join Date
    Feb 2010
    Ride
    2010 MS3 (black mica)
    Posts
    1,456
    Thanks
    10
    Thanked 12 Times in 10 Posts
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Quote Originally Posted by Fobio View Post
    you're running rich...typical Gen2 stock or OTS tune.
    Thanks. This will be fixed later this summer after I go stage 2 and get you to protune the mofo

  12. #1912
    Jr Member joedemarco's Avatar
    Join Date
    Jul 2011
    Location
    Bolton, Ontario
    Posts
    747
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    looking for a simple answer to these questions.

    1: is a test pipe is similar to a downpipe in that I need and ungraded FP in order to safely run it?
    2: will it make my stock exhaust slightly louder?
    3: I see that SU is highly recommended. Is there any other TP that are recommended, preferably ones that you have experience with.

    I have tried to search for this info, on google and the forum but havent got a definitive answer. please post a link if you have a link that answers these (mainly the first) and if you do, dont bother answering them as I will read the link.

    Thanks.
    Quote Originally Posted by S.F.W. View Post
    Easy formula to remember for success when modding your car..
    no wife + no kids = no problems.

  13. #1913
    Sr Member
    Join Date
    Oct 2007
    Location
    Bradford
    Ride
    Genesis coupe 3.8, yaris
    Posts
    3,093
    Thanks
    8
    Thanked 2 Times in 2 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    1) generally not for a first gen, but if you get less than 1650 or so psi at wot then yes
    2) yes
    3) I used to have the SU TP and fitment was very good.

  14. #1914
    Moderator Mr Wilson's Avatar
    Join Date
    Jan 2010
    Location
    Toronto
    Posts
    4,621
    Thanks
    1,341
    Thanked 700 Times in 381 Posts
    Mentioned
    227 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    1: Exhaust is downpipe, mid pipe and cat back. DP and MP have cats. Some aftermarket DP are single piece DP/MP. Pump is alway recommended.
    2: Yes
    3: Not sure
    0.000212524463 gigawatts

  15. #1915
    Member fywdyl's Avatar
    Join Date
    Jun 2010
    Posts
    1,631
    Thanks
    88
    Thanked 105 Times in 64 Posts
    Mentioned
    40 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    1) TP removes the 2nd CAT, as per the two above, pump is recommended
    2) Yes if you get catless, maybe not if you get the UR resonated one
    3) Neil (majesticblueNTO) and I both have the UR combo (DP + TP) and both are resonated TPs. Neil says that it's not much louder than stock, and you heard my car the other day... I don't think it's much louder, just a little deeper tone.

  16. #1916
    Sponsor - Mspeed Tuning & Diagnostics
    Fobio's Avatar
    Join Date
    Jan 2008
    Age
    47
    Posts
    6,742
    Thanks
    663
    Thanked 456 Times in 178 Posts
    Mentioned
    173 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    chk out the Guardian Angel thread. I need to confirmm order ASAP.

  17. #1917
    Jr Member cSPEED's Avatar
    Join Date
    Oct 2011
    Location
    Richmond Hill
    Posts
    854
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Joe if you just want a louder exhaust at almost no cost just cut the resonators. I've been told numerous times my car sounds like an STi cause it does haha. Doesn't drone on highways but when you rip it it sounds beastly. I have a downpipe too though.
    2007 Mazdaspeed3
    drive slow homie...

  18. #1918
    Sponsor
    BlueStreak's Avatar
    Join Date
    Oct 2007
    Posts
    1,183
    Thanks
    39
    Thanked 34 Times in 13 Posts
    Mentioned
    34 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Yesterday was a big day for my car. It has finally passed the 100,000 KM mark.


    I would like to raise a toast to the biggest pain in my ass. I still love you so much <3

    Also note the sweet mileage on one tank of gas. Pretty sure I could've gotten it to 500KMs easy. I just didn't want to run out of gas... again x3...

    Pretty sweet mileage for a forged motor

    Quote Originally Posted by loki View Post
    You've been driving like a bitch.
    Yes.

  19. #1919
    Banned
    Join Date
    Apr 2010
    Location
    Projects
    Ride
    another mazda
    Posts
    1,976
    Thanks
    67
    Thanked 261 Times in 121 Posts
    Mentioned
    51 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Quote Originally Posted by BlueStreak View Post
    Yesterday was a big day for my car. It has finally passed the 100,000 KM mark.


    I would like to raise a toast to the biggest pain in my ass. I still love you so much <3

    Also note the sweet mileage on one tank of gas. Pretty sure I could've gotten it to 500KMs easy. I just didn't want to run out of gas... again x3...

    Pretty sweet mileage for a forged motor



    Yes.

    Faack dude. Did you just drive to China and back??? You were at 90k a month ago bro.

  20. #1920
    Sponsor
    BlueStreak's Avatar
    Join Date
    Oct 2007
    Posts
    1,183
    Thanks
    39
    Thanked 34 Times in 13 Posts
    Mentioned
    34 Post(s)
    Tagged
    0 Thread(s)

    Default

    The drive to New Jersey packed on some serious miles

  21. #1921
    Banned
    Join Date
    Apr 2010
    Location
    Projects
    Ride
    another mazda
    Posts
    1,976
    Thanks
    67
    Thanked 261 Times in 121 Posts
    Mentioned
    51 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    not 10k worth....lol

  22. #1922
    Moderator loki's Avatar
    Join Date
    Mar 2011
    Location
    Toronto
    Age
    43
    Posts
    18,049
    Thanks
    1,911
    Thanked 6,154 Times in 3,173 Posts
    Mentioned
    881 Post(s)
    Tagged
    1 Thread(s)

    Default Re: Random MS3 Chat Thread

    when your car is that badass, you earn double miles

    think about it

  23. #1923
    Member mazdaspeedemon3's Avatar
    Join Date
    Nov 2011
    Location
    Hamilton/St. Kitts
    Posts
    1,007
    Thanks
    47
    Thanked 27 Times in 12 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Hey guys, anyone know if these parts are compatible with the Gen2 (all parts would be coming from Gen1)

    Weathertech digital floor liners
    Cobb Accessport v2
    test pipe
    Cobb SRI
    Cobb TIP
    also would a 215/45/18 size tire throw off the tachometer or anything else?

    Thanks,
    Mazdaspeedemon3's Ride



    yo, i update my sig everyday with other peoples comments. son

  24. #1924
    Moderator Mr Wilson's Avatar
    Join Date
    Jan 2010
    Location
    Toronto
    Posts
    4,621
    Thanks
    1,341
    Thanked 700 Times in 381 Posts
    Mentioned
    227 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Weathertech digital floor liners - no
    Cobb Accessport v2 - should be
    test pipe - yes
    Cobb SRI - yes
    Cobb TIP - yes
    also would a 215/45/18 size tire throw off the tachometer or anything else - shouldn't, that's the stock tire size on the Gen 1, not thinking of this size for your car are you?

  25. #1925
    Member mazdaspeedemon3's Avatar
    Join Date
    Nov 2011
    Location
    Hamilton/St. Kitts
    Posts
    1,007
    Thanks
    47
    Thanked 27 Times in 12 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Random MS3 Chat Thread

    Quote Originally Posted by Mr Wilson View Post
    Weathertech digital floor liners - no
    Cobb Accessport v2 - should be
    test pipe - yes
    Cobb SRI - yes
    Cobb TIP - yes
    also would a 215/45/18 size tire throw off the tachometer or anything else - shouldn't, that's the stock tire size on the Gen 1, not thinking of this size for your car are you?
    k Thanks Wilson, reason i asked is a member is selling stuff from his gen1 and hes got winter tires that size, j/w if they'd work... but i dont want to mess up the tach so i think ill just stick with stock size winters.

Page 77 of 281 FirstFirst ... 2767757677787987127177 ... LastLast

Similar Threads

  1. XBOX 360, PS3 & Wii Chat thread.
    By jaM3ican in forum General Lounge
    Replies: 89
    Last Post: 06-05-2009, 09:22 PM
  2. Random Movie Thread
    By SirWanker in forum General Lounge
    Replies: 20
    Last Post: 04-10-2009, 03:21 PM
  3. Random Pic Thread
    By Broli in forum Pictures and Videos
    Replies: 12
    Last Post: 08-12-2007, 01:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •