mikey32235's ride thread

[Thrizzl3]

..

[mikey32235]

no you can spin the head so it closes the valve so it circulates

[Thrizzl3]

no you can spin the head so it closes the valve so it circulates

ya i know. i was an idiot for posting that question...my bad..

lol

[mikey32235]

lol hahah lets see if it fixes the problem tomorrow!

[boyracer]

this thread should now be moved to "memebrs' rides" section.

I agree with Fobio wholeheartedly on this.

[mazdaspeedemon3]

bov VTA might be your problem.............

[Lockdown]

At idle?

Sounds like BOV left too loose could affect the idle but VTA shouldn't have anything to do with stumble at idle.

[loki]

No I think this thread should stay here

Might actually learn something from all these problems

[Fobio]

No I think this thread should stay here

Might actually learn something from all these problems

The problem is the loose nut behind the wheel. This section should not be home to a personal diary or journals. That's what the Members' Ride section is for.

[mikey32235]

im gonna check now to see if it fixes the problem.. fingers crossed!

[loki]

im gonna check now to see if it fixes the problem.. fingers crossed!

You're gonna check what exactly?

[mikey32235]

well to see if i closed the vent on my bov it would start better... nope, rough start/idle. then it died. ****!

[mikey32235]

bov VTA might be your problem.............

now its set to VTI..

[loki]

now its set to VTI..

recirculate

[mikey32235]

yes thank u for the correction loki lol. it is recirculating. hopefully i figure this out today what the problem is.

[Lockdown]

now its set to VTI..

But did you adjust it?
There should be a nut/bolt combo on it to adjust

[mikey32235]

yup i adjusted it.. i looked more into it and i need a belt tensioner pulley... its not moving and it gets stuck so mabye that can fix the problem

[loki]

yup i adjusted it.. i looked more into it and i need a belt tensioner pulley... its not moving and it gets stuck so mabye that can fix the problem

Breakfasteatre will give you $100 for your entire car as is. He needs the fuel pressure sensor.

[mikey32235]

**** off

[boyracer]

Breakfasteatre will give you $100 for your entire car as is. He needs the fuel pressure sensor.

Hahaha. loki, you're too much.

[Olestra]

VTI = Vent to interior?

[loki]

VTI = Vent to interior?

VTI = Vent To Innersphere

please try to keep up with the lingo...

[mikey32235]

by running the BNR SIII turbo, if i follow this, i think i should be good right? http://www.mazdaspeedforums.org/foru...wap-how-88946/ I'm thinking i would also need injector seals.

[greyseason]

Now i know i dont have a speed, But you cant just keep upgrading your car expecting all your problems to magically disappear. Id say before you go stage3 BNR figure out why youre having so many problems.. As its been metions at least once in here, just take it to MSpeed and have it professionally looked at. It will save you a head full or worry and creating even more problems.

[mikey32235]

i know believe me I'm going to do that first get everything fixed.. mazda said the car was good all it needs is a belt tensioner pulley.. they couldn't figure out why it was stalling when cold.