Random MS3 Chat Thread

[Fack_Dude]

You can do stoptech pads front/rear and stock rotors front/rear for around $425 not including labour to install

Where?

[SomeGuy]

Hey guys so finally bought the internals, cobb ap, cp-e sri,tip and forge bpv v1. Gonna get them installed in a couple of weeks. Would it be safe to run these mods on stock tune? Im planning to get a tune by our very own mspeed guys but it will be a month before i can find time for it. Plus i dont really trust the ots stage 1 maps on the cobb site. Any advise will be great thanks.

Yes it would be fine, but the stock tune sucks...the OTS maps from cobb are plenty safe (if not safer in some ways) so just run the stage 1 map until you go for a tune.

How much? I am curious cuz might go with corksport ones from the reviews they got by Haltech on MSF. That is when my OEM pads are shot which probably won't be for a little while.

I've got a set of the corksport pads on the way...we'll see if they're any good.

[loki]

Where?

pads from Alpha and rotors from Mazda of Toronto

[izoom]

Yes it would be fine, but the stock tune sucks...the OTS maps from cobb are plenty safe (if not safer in some ways) so just run the stage 1 map until you go for a tune..

Thanks for the info. Will do this then until i get a tune. Thanks again

[fywdyl]

I will wait patiently for your review Loki before I decide what to do.

Fyi OEM front pads 200, OEM rear pads 133.

[Fack_Dude]

is that what you're doing?

I have stoptech slotted rotors and Kevlar pads. I did them about a month ago.

[Mazdy]

What's the avg. Km per month u guys drive ur speed?

Cuz I'm almost at 3k after owning it for only almost 2 months....I feel like I drive her a lot..

[izoom]

What's the avg. Km per month u guys drive ur speed?

Cuz I'm almost at 3k after owning it for only almost 2 months....I feel like I drive her a lot..

Im putting the same on mine lol. Im averaging around 350 a week. Lol

[SilentJay]

What's the avg. Km per month u guys drive ur speed?
Cuz I'm almost at 3k after owning it for only almost 2 months....I feel like I drive her a lot..

Sitting at 8300km and my 3rd month is on Tuesday

[Thrizzl3]

I have stoptech slotted rotors and Kevlar pads. I did them about a month ago.

lol ok? quoted the wrong person? nice derek

[Fack_Dude]

What's the avg. Km per month u guys drive ur speed?

Cuz I'm almost at 3k after owning it for only almost 2 months....I feel like I drive her a lot..

Who cares how many kms you got on the car. It's a Mazda just drive it.

[SomeGuy]

I've got 36,000km on it after owning it nearly 3 years...so 1000km/month or so?

[bluecraze07]

I've heard the speed 3 is quite a hard car to drive with its clutch setup. Just wanna hear some feedback about the drive ability on the car from actual owners. Pain to drive smoothly in traffic an such?

[Mr Wilson]

It's fine, any idiosyncrasies you get used to after a short period.

[loki]

I've heard the speed 3 is quite a hard car to drive with its clutch setup. Just wanna hear some feedback about the drive ability on the car from actual owners. Pain to drive smoothly in traffic an such?

no issues

[mikey32235]

probably easier than a civic cause you can actually feel the release point.

[SilentJay]

It's a bit heavier than the regular Mazda3, but as someone who drives it through bumper-to-bumper everyday, you'll get used to it.

[loki]

It's a bit heavier than the regular Mazda3, but as someone who drives it through bumper-to-bumper everyday, you'll get used to it.

gen1 speed is a hell of alot stiffer than the gen2

[DLYDRVN]

I don't have any issues moving between my speed, rx8 and 2. My gen1 took zero adjustment time for me

[MarineMazda]

I've heard the speed 3 is quite a hard car to drive with its clutch setup. Just wanna hear some feedback about the drive ability on the car from actual owners. Pain to drive smoothly in traffic an such?

Speed 6 here with ACT 6 puck Clutch. When the car was running i had no issues in bumper to bumper, so Stock should be a breeze!!

[DLYDRVN]

This is good to know.. I've been thinking about 6-puck kit. Have a normal ACT in my2 and it's fantastic. 6puck for a DD speed3 works ok?

Speed 6 here with ACT 6 puck Clutch. When the car was running i had no issues in bumper to bumper, so Stock should be a breeze!!

[SomeGuy]

Just put in the corksport TMM insert...pretty neat little piece and made more of a difference than I expected but can't notice any additional vibes at all. Win win for those who don't want to do a full mount replacement.

[zzz3]

Anyone know what happened to 2012speed3? Txt'd him a while back to see what's new with no response and today I noticed he's banned ?

[Fobio]

Anyone know what happened to 2012speed3? Txt'd him a while back to see what's new with no response and today I noticed he's banned ?

He also owes $60 for a Prosport order...deferred it to Loki, who ate it for him.

[Fack_Dude]

It sucks when someone gets ripped off on the forum especially from another speed brother.