HellaFlush mazda3s?

[The Wolf]

^yes. Backing up over a skipping rope.

Here it is:

http://www.youtube.com/watch?v=N2Y5ZUDVNd0

[Aitch]

I like it, but wish it was spec'd so it could have less camber out back.

[GWN]

that is fantastic, wish I had the guts to drive that low daily, maybe next year lol

[schmat66]

that is fantastic, wish I had the guts to drive that low daily, maybe next year lol

yup hes static, just recently cracked his oil pan not knowing and blew his motor, shit happens rolling hard pays

me and you go ham next year?

[Hyperion]

now THAT is gorgeous. dare I ask, static? if so, game over (except for maybe Kevin on MF, at least i think that's his name lol)
fenders aren't butchered, camber is on point (not excessive because it's necessary imo) and the front end is spectacular, except it looks like the bumper and driver's side fender are slightly different colours?

His front passenger is demolished. All others, except for from driver, are bubbling.

[Dave_The_BMXER]

yup hes static, just recently cracked his oil pan not knowing and blew his motor, shit happens rolling hard pays


Wouldn't the oil pressure light go off fairly quick? Or was it a slow leak? Either way that sucks.

Fenders a little rougher than I thought but still not too bad. Quarters... well doesn't snow where he is right?

[schmat66]

Wouldn't the oil pressure light go off fairly quick? Or was it a slow leak? Either way that sucks.

Fenders a little rougher than I thought but still not too bad. Quarters... well doesn't snow where he is right?

slow leak

[GWN]

yeah fenders aren't as mint as I thought they were from the first picture, still props to him though. too bad about his motor though

[Reddie1337]

I would never want to run that low. Thats just hazardous, and the fact that he broke his oil pan, thats a problem, should have just put some washers under the motor mounts to raise the motor up a CM or so.

[Dave_The_BMXER]

http://i658.photobucket.com/albums/uu308/jturbo23/DSCN0569.jpg

Phil mandafaqup

[schmat66]

yes phil

[Gareth232]

+1

[zzz3]

http://i658.photobucket.com/albums/uu308/jturbo23/DSCN0569.jpg

Phil mandafaqup

Fuuu that.

Phil is coming to the track - he is all about hella functional.

[GWN]

http://i658.photobucket.com/albums/uu308/jturbo23/DSCN0569.jpg

Phil mandafaqup

buy my wheels? :chuckle

[Dave_The_BMXER]

Fuuu that.

Phil is coming to the track - he is all about hella functional.

This car:
http://illmotion.com/wp-content/uploads/2012/04/IMG_1796editS.jpg

=

http://www.sigmatimeattack.com/wp-content/gallery/august-21-2011_james-won/blue-honda-s2000-james-won-5-640x427.jpg
http://www.automotofoto.net/wp-content/gallery/sigma-racing-time-attack-round-4/sigma-racing-time-attack-round-4-gp_amf-020.jpg
http://www.automotofoto.net/wp-content/uploads/2012/08/Sigma-Racing-Time-Attack-Round-4-THUMBNAIL-18.jpg

Just sayin Phil could track his stocks.

Edit, added times.

Group A
1. Alex Morrow: 2011 Mazda Mazdaspeed 3 Blue – 1:26.20
2. MajesticBlue: 2008 Mazda Mazdaspeed 3 Red – 1:27.81
3. SED-G: 2012 BMW 335xi Black – 1:27.84

Group B:
1. James Won: 2007 Honda S2000 Blue – 1:26.46
2. Kyle Beaty: 1990 Toyota Celica Black – 1:34.26
3. Lazor: 2006 Mazda Mazda3 Blue – 1:37.60

(it's mosport)

[The Wolf]

BOOOOOOOOOOM

[midnightfxgt]

If someone is looking for air, get at me. Same setup as mine (Airrex and Autopilot V2 w/ Camber arms) for $2700!!

Not my setup, but Sam from MTL who isnt on the forums. I'll put you in touch with him... PM me :)

[Aitch]

Shit I think I should ask more for mine! Although now loki can stop calling me a bitch and focus on Sam.

[midnightfxgt]

How much are you going to ask Steve? I didnt know yours was ready to go!

[Dave_The_BMXER]

I have reason to believe his is gone

[Aitch]

Should be sold this weekend.

[loki]

Should be sold this weekend.

Bitch....


Who's Sam?

[Thrizzl3]

http://i658.photobucket.com/albums/uu308/jturbo23/DSCN0569.jpg

Phil mandafaqup

i like this....hmm..next year ;)

[zzz3]

BOOOOOOOOOOM

the guys runs different wheels on the track, so what? i do that too. lets see him run the SL's and put up FTD...

[The Wolf]

Not a 3, but on the subject of track beasts, I had to post this here...

http://farm9.staticflickr.com/8032/8056184200_149debf257_c.jpg
http://farm6.staticflickr.com/5117/7435274850_b37b3505df_c.jpg
http://farm9.staticflickr.com/8010/7457512672_dbd7f17eef_b.jpg
http://farm9.staticflickr.com/8335/8092623230_abf823981a_c.jpg

[loki]

Not a 3, but on the subject of track beasts, I had to post this here...


Damn those are some nice wheels

[mazdaspeedemon3]

tow hook is boss

[RBoy8]

Not a 3, but on the subject of track beasts, I had to post this here...

That is so hot.

[The Wolf]

Damn those are some nice wheels

http://farm8.staticflickr.com/7087/7350628896_b52d90c444_c.jpg

[Dave_The_BMXER]

the guys runs different wheels on the track, so what? i do that too. lets see him run the SL's and put up FTD...

So if you can do that, then so can Phil, thus the photo I posted is valid no and a fair rebuttal to your "FUUUU that" comment?

[zzz3]

So if you can do that, then so can Phil, thus the photo I posted is valid no and a fair rebuttal to your "FUUUU that" comment?

Phil could do that. I could eat humble pie. We'll just have to see.

[loki]

Phil could do that. I could eat humble pie. We'll just have to see.

humble pie tastes like shit, zzz


So if you can do that, then so can Phil, thus the photo I posted is valid no and a fair rebuttal to your "FUUUU that" comment?

Phil won't do that, but it does look good. Can't tell how much camber they're running on the rear, but doesn't seem overly excessive at all


tow hook is boss

you mean the licence plate holder? For towing it looks like he just has a strap



Sawatsky, again those rims are top. Huge fan of the simple race look

[Dave_The_BMXER]

That car isn't excessive at all camber wise. I would say less than myself and I'm about 2.5. So 2 maybe?

[CH0SiiN1]

I hope to get my 3 on this thread this spring, I don't know hellaflush I will go with what I got.. I do plan on going low, wide staggered rims with a lot of offset.. My pockets aren't deep enough for all that camber

[CH0SiiN1]

http://i658.photobucket.com/albums/uu308/jturbo23/DSCN0569.jpg

Phil mandafaqup

S!cK!!

[schmat66]

discuss

http://www.stancenation.com/wp-content/uploads/2012/10/521-640x426.jpg

[Thrizzl3]

where can he go fast? NO WHERE!!! hella sunk. lol

[Gareth232]

discuss

http://www.stancenation.com/wp-content/uploads/2012/10/521-640x426.jpg

Love it!

[The Wolf]

Steve no like wheels.

[GWN]

seems plain to me, but stance is on point

[loosecannon]

Are those MB battles?

[schmat66]

look like it yes

[Tokic_o]

kind of look like G35 rims too lol

[Genpu_Mz3]

discuss

http://www.stancenation.com/wp-content/uploads/2012/10/521-640x426.jpg

****ing Clean, Simple, Nothings Over Done. I Like Looooong Time!!

[schmat66]

anyone looking for kw v2s let me know, not mine seen a set go up for cheap

[zzz3]

If I pulled fenders, you guys think 18x9.5 +22 would work? Would I need camber plates? I don't mind a little poke in the front (as was the case with my street setup).

[Aitch]

You're going to need fender flares for that, especially in the front. I know Hyperion needs a few degrees negative camber just to fit 18x8.5 +38 on his front end, and you're talking about another 28mm of poke.

[GWN]

If I pulled fenders, you guys think 18x9.5 +22 would work? Would I need camber plates? I don't mind a little poke in the front (as was the case with my street setup).

it'll work with enough camber. up front is where it gets tricky, but the rear should be fine with a good stretch and some decent camber. i'd go narrower up front if you don't want demon camber or fender flares

[Nextmod]

If I pulled fenders, you guys think 18x9.5 +22 would work? Would I need camber plates? I don't mind a little poke in the front (as was the case with my street setup).

you will definitely have to pull and roll the front fenders and then get as much camber as you can in front. I am running 18x8.75 +20 all around and my front rubs everywhere i go! but it is do-able. i was planning to go with that size in the beginning and you own a 2010+ which means you have a bit wider fenders then the first gen 3's :) ! do it do it !

[Kiyomi]

If I pulled fenders, you guys think 18x9.5 +22 would work? Would I need camber plates? I don't mind a little poke in the front (as was the case with my street setup).

do that for the back. for the front 18x9 +35 will prob get what your looking for.

[Mty Mous]

9" wide with +35mm offset would be similar to my 8" wide with +22mm offset and yes, that should work fine for the Fronts, I simply lowered it didn't even bother checking camber or alignment this summer ... didn't care about wearing out the tires quick ... next spring with fresh rubber, it'd be a different story.

[midnightfxgt]

Positive offsets? :P

[The Wolf]

Positive offsets? :P

Lol buncha chicks eh?

[midnightfxgt]

Lol.. trust me, I wish I coulda run "normal specs". 3pc was the only way to get something that fit.

[zzz3]

i ran 18x9 +45 with 235/40 lowered 1.75" inch without pull/roll/rub. the new setup would be square, i wouldn't have a choice as im buying the rims off someone. they come with 255/35/18s (i really want the tires lol)...if i had a choice i would limit it to 9 up front but i dont.

[Hyperion]

Possibly the greatest link in this thread: http://www.fitmywheels.com/

[Aitch]

Possibly the greatest link in this thread: http://www.fitmywheels.com/

Shit that's bad-ass. I think I'll post that in the "will these wheels fit" thread.

[schmat66]

word on the street, lowest static 3 is thinking about going air

https://sphotos-a.xx.fbcdn.net/hphotos-prn1/134802_479428685431021_1328289443_o.jpg

[Aitch]

Can't take it any more. Wuss.

[Dave_The_BMXER]

I am all for Shavi going Air.

[Aitch]

I'm just jelly.

[05Mazda3GT]

This deserves a mention.

http://www.canibeat.com/2012/11/defying-the-odds-sam-mahmassanis-mazda3/

[The Wolf]

I think shavi swapped out his BC's for solid steel rods.

[loosecannon]

This deserves a mention.

http://www.canibeat.com/2012/11/defying-the-odds-sam-mahmassanis-mazda3/

What caught my attention was the line where it said "Only a short distance from his house, Sam’s dream came to a screeching halt."

I wonder what happened?

[Reddie1337]

Probably a crack in the road, possibly sending the rim into the fender.

Don't know why he would return it to stock, and not just lift it up a bit.

[Hyperion]

Probably a crack in the road, possibly sending the rim into the fender.

Don't know why he would return it to stock, and not just lift it up a bit.

He was on air...

[Aitch]

What caught my attention was the line where it said "Only a short distance from his house, Sam’s dream came to a screeching halt."

I wonder what happened?

Yeah I'm WTF about that too. They implied the law had something to do with it too.

[Dave_The_BMXER]

"To those that are inquiring, the car was forced to be brought back to stock due to local authority and law. (No modification of stock suspension)."

doesn't really make sense to me.

[Aitch]

Apparently, prohibited in Quebec: "Using springs that have been shortened, bundled or overheated. It is also prohibited to have a suspension that is too rigid, an insufficient wheelbase, tires that touch a vehicle component or any part of the vehicle body that touches the road surface in a normal driving situation." So hard-assed cops could have written tickets for improper suspension. Given how low his car sits, and knowing that the AirRex suspension only has about 3" of lift, even raised completely they might deem it too low (or find fault with suspension able to be adjusted while moving). I'm not saying its 100% illegal, but perhaps something like this occurred and Sam decide the hassle of fighting it wasn't worth it.

[-RJ3-]

I love to just have my car photoshopped to look like this.. Then I can decide if I want this lol.. Any takers?

[CelestSpeed3]

This thread is interesting. Is there any way someone can post the wheel and tire sizes on the cars.

You can run 10" wheels on the car with little issues. So unless they are larger than that I find the ridiculous camber very stupid.

[zzz3]

This thread is interesting. Is there any way someone can post the wheel and tire sizes on the cars.

You can run 10" wheels on the car with little issues. So unless they are larger than that I find the ridiculous camber very stupid.

This is what I want to run:
http://toronto.kijiji.ca/c-cars-vehicles-auto-parts-tires-tires-rims-SSR-Type-C-18x9-5-Wheels-W0QQAdIdZ424147944

You think we can make it work with pulled fenders? You got the roller and magic touch...

[The Wolf]

very few, if any people are running wheels larger than 10". Ridiculous camber is mostly due to low offset. Either just for the sake of having low offset, or for a deep dish/concave look.

Agree about the ridiculous camber. I'm personally not a fan. Everyone wants to be "the widest, the most extreme, the lowest" etc... without focusing how their car looks as a whole.


I heard a motorcycle builder/enthusiast describe how I feel best. Something along the lines of this:


It's kind of like a movie showing a big custom bike shop designing a bike. A shot of one guy designing the taillights, skip to a shot of another guy designing the gas tank, skip to another guy designing the handlebars... and as the camera pans out to reveal the finished bike, it just looks like a complete mess. Every part is designed well, and looks good on its own, but nothing flows with anything else. To me, I like to think about how one part of the bike will affect another. I like bikes that look like the whole thing was designed and thought out together.


edit: zzz3, methinks that'll be quite difficult to make happen up front.

[Dave_The_BMXER]

You can run 10" wheels on the car with little issues. So unless they are larger than that I find the ridiculous camber very stupid.

????? Do you know something we do not?

As for camber I think it needs to flow, so tons out back and very little upfront doesn't flow and thus isn't as appealing to me. But I've said this over and over.

[Thrizzl3]

10" wide on mazda 3. must see!!!

no seriously lol

[GWN]

10" wide on mazda 3. must see!!!

no seriously lol

wait for spring?

[Thrizzl3]

wait for spring?

damn right ;)

[GWN]

saw them at nextmod the other day, fitting them will be FUN to say the least lol. exact specs are being kept secret though :chuckle

[The Wolf]

fuuuuuuuuuuuuuuuuuuuuu

[loosecannon]

saw them at nextmod the other day, fitting them will be FUN to say the least lol. exact specs are being kept secret though :chuckle

On Unizzle's car or your car? ;)

[midnightfxgt]

10" wide on mazda 3. must see!!!

no seriously lol

http://instagram.com/p/N4BrBQnaWr/

[GWN]

On Unizzle's car or your car? ;)

one of the two lol

[Thrizzl3]

http://instagram.com/p/N4BrBQnaWr/

Besides yours John haha

[midnightfxgt]

Ya, mines cheating a bit lol.

[schmat66]

Ya, mines cheating a bit lol.

10 wide all around

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash4/269426_419011054819251_1493618216_n.jpg

[Dave_The_BMXER]

with little issues!

[midnightfxgt]

Ya I could have easily done 10" all around. Hell, even an 11"/12" stagger easy without the need for the terrible camber on that dude's car. LOL

[CelestSpeed3]

This is what I want to run:
http://toronto.kijiji.ca/c-cars-vehicles-auto-parts-tires-tires-rims-SSR-Type-C-18x9-5-Wheels-W0QQAdIdZ424147944

You think we can make it work with pulled fenders? You got the roller and magic touch...

The short answer is no. The problem is you need 2 different offsets for the front and rear. That offset will work in the front but not the back.


Phil you want to see 10's . . . . Wait for my track setup.

I think locally at least I'm running the widest set going. I could be wrong though.

[-RJ3-]

Ya, mines cheating a bit lol.

A bit BM3?????? lol.

[Slade]

This is the definition of new or modern rice in my eyes.

While alot of old rice cars looked like crap, its better then being unsafe.


10 wide all around

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash4/269426_419011054819251_1493618216_n.jpg

[terapr0]

I think it just looks ****ing stupid. Dangerous aside, it's ugly and looks broken.

[schmat66]

This is the definition of new or modern rice in my eyes.

While alot of old rice cars looked like crap, its better then being unsafe.

far from rice,

[Thrizzl3]

Phil you want to see 10's . . . . Wait for my track setup.

I think locally at least I'm running the widest set going. I could be wrong though.

this is have to see...

[Slade]

far from rice,

Big wing/ugly stickers/fart cannons vs tires that do not fit proper/rims that demolish your fenders/suspension so stiff your car has no vertical movement.

Both are ugly.
One is unsafe.
Neither make your car go faster or IMPROVE handling.

[schmat66]

okay so are you saying any show car is rice?

[schmat66]

people build cars for different reasons. if someone likes too boost there car go ahead, someone wants to slam it to the ground go ahead. but its not rice.

[loki]

far from rice,

far from rice, because is rice

:chuckle

[Slade]

okay so are you saying any show car is rice?

No, not in any way :)

It's just MY opinion that it is, because it matches most of the common descriptions of "rice"

Come follow me down a gravel road with my mud terrains sticking 6 inches out from my wheel wells/fenders :chuckle

I also don't believe your car tires are at a 75degree angle, I like your car, I much prefer a low car that has tucked wheels then one that scrapes their fender at the sight of a pot hole.

[Shinglez]

No, not in any way :)

It's just MY opinion that it is, because it matches most of the common descriptions of "rice"

Come follow me down a gravel road with my mud terrains sticking 6 inches out from my wheel wells/fenders :chuckle

I also don't believe your car tires are at a 75degree angle, I like your car, I much prefer a low car that has tucked wheels then one that scrapes their fender at the sight of a pot hole.

Lifting/Lowering....same diff :)

[schmat66]

No, not in any way :)

It's just MY opinion that it is, because it matches most of the common descriptions of "rice"

Come follow me down a gravel road with my mud terrains sticking 6 inches out from my wheel wells/fenders :chuckle

I also don't believe your car tires are at a 75degree angle, I like your car, I much prefer a low car that has tucked wheels then one that scrapes their fender at the sight of a pot hole.
thanks

just saying that is unsafe.. you could fling something into my windsheild causing a accident..

now im all for lifted trucks (dad has 2010 ram lifted 9 inchs) but everyone builds cars differently. most lifted trucks never get used for what there for anyways.

this is a show car ment to fit wide ass rims with being super low.

my car is just as rice as his... my car sparks down flat roads at times, thats unsafe

[GWN]

I think locally at least I'm running the widest set going. I could be wrong though.

ahhhh we'll see :chuckle

to those who say hellaflush is rice, your opinion is your own, but to me it seems odd to post it in the hellaflush thread? maybe the "rice" thread is a better spot? don't bother checking that anyway so have at it

[The Wolf]

Hellaflush is not rice. Hellaflush is not extreme camber. Skrillex is not dubstep. Taylor Swift is not hot. Popped collars are not cool. I could go on all day.

[schmat66]

nuff said


http://www.youtube.com/watch?v=S-BGIcRBPHM

[Tokic_o]

LOL so much hate. isn't this forum all about to each their own?

I think when I made this thread the focus wasn't for function it was for form and the satisfaction you get from everyone's respective "stance" that they achieve.

[schmat66]

exactly so if you dont like form dont look at this thread

and for the lovers not the haters

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/532323_552228914790924_2143984723_n.jpg

[Jackal]

Stop drinking the haterade people.

I wouldn't do it to my car, but everyone should decide that for themselves. I must admit it does look good on some cars or show cars (nothing extreme mind you so that it's dangerous).

[m3rk]

Here's another side viewhttp://i1208.photobucket.com/albums/cc377/Rayan_ZoOm/IMG_1244.jpg

[-RJ3-]

Next year I'm going stfu lol

Slammed
Tucked
Fat
Universal (just to add the u lol)

[midnightfxgt]

exactly so if you dont like form dont look at this thread


Like anything, there is good and bad. The thread has some really nicely done cars, and then some that are just dangerous. Not too many of the guys who have extreme camber last like that. They usually smarten up and go air, sell the car, or go back to something a little more tame.

The guy on Works above isn't bad. Little too much poke for me.

[Thrizzl3]

Next year I'm going stfu lol

Slammed
Tucked
Fat
Universal (just to add the u lol)

i wonder which rims you're thinking about :D

[The Wolf]

Something to get your knickers in a knot.

http://i103.photobucket.com/albums/m134/lax22pearl/54298_386044781474594_575583029_o.jpg

[schmat66]

brads speed, 11 wide in the rear

[Dave_The_BMXER]

Need more photos

[mazdaspeedemon3]

Something to get your knickers in a knot.

http://i103.photobucket.com/albums/m134/lax22pearl/54298_386044781474594_575583029_o.jpg

Knickers are knotted! Lol I love the way the front mount looks on the gen1's

[schmat66]

17x10 +9 17x11 -2

only 2 photos out atm


http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/550114_10151315079145482_2035317049_n.jpg

[Hyperion]

17x10 +9 17x11 -2

only 2 photos out atm



http://cdn.memegenerator.net/instances/400x/30593614.jpg

[Dave_The_BMXER]

The one directly above it is the other smarty pants.

[Thrizzl3]

Knickers are knotted! Lol I love the way the front mount looks on the gen1's

that fmic is fatter than mine :( oh well

[Aitch]

That's ok if yours is longer.

[Dave_The_BMXER]

http://24.media.tumblr.com/tumblr_mdv785AKDW1rph0z9o1_1280.png

Bout it.

[Impressive]

http://24.media.tumblr.com/tumblr_mdv785AKDW1rph0z9o1_1280.png

Bout it.

Royal flush of fitment right here.

[midnightfxgt]

^^^ Clean and flush is WAY nicer than stupid camber imho

[The Wolf]

Wheels don't do it for me, but the fitment is aces

[zzz3]

rims so nise. are they ccw?

[Dave_The_BMXER]

VIP modular looks like.

[GWN]

VIP modular looks like.

I believe they are modular's. If that's the car on MF i'm thinking of

[The Wolf]

VIP modular looks like.


I believe they are modular's. If that's the car on MF i'm thinking of

It's Wonderment from MF. Also yes they're VIP Modular. I like them on bigger cars, but not on a MS3.

[The Wolf]

All you guys on coilovers; do you think plasti-dipping them over the winter would protect the threads from salt/road gunk?

[terapr0]

you know I think that might actually work....it could be a little difficult to remove from the threads, but that's nothing a wire brush couldn't handle...
not a bad idea you should give it a try and let us know

[Aitch]

Yeah but using a wire brush will at least score the metal surface, making it easier for rust to take hold (even in summer).

[Kiyomi]

All you guys on coilovers; do you think plasti-dipping them over the winter would protect the threads from salt/road gunk?

I plan on cleaning them, raising them up, then greasing them like no tommorow. but that is an interesting idea.

[Hyperion]

I plan on cleaning them, raising them up, then greasing them like no tommorow. but that is an interesting idea.

Join 4 x 4!

[loosecannon]

Join 4 x 4!

Can I haz membarshipppp?

[schmat66]

cant wait for teh comments

http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash3/148137_343317535766105_1563951840_n.jpg

[The Wolf]

Poor exhaust execution. If he has snows on there, game over he wins.

[optiklenz13]

cant wait for teh comments

http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash3/148137_343317535766105_1563951840_n.jpg

It's underexposed. :D

[Dave_The_BMXER]

What wheels are those?

Not my style though. (Edit: the car)

[schmat66]

not sure just found the pic

[schmat66]

enjoy japan style

http://www.stancenation.com/wp-content/uploads/2012/11/831.jpg

http://www.stancenation.com/wp-content/uploads/2012/11/881.jpg

http://www.stancenation.com/wp-content/uploads/2012/11/373.jpg

[Reddie1337]

See, that looks good, the second last and last pic. It is flush, but not out on a crazy unsafe angle. That is nice.

[Dave_The_BMXER]

Lol didn't know those skateboards made it to Japan.

[The Wolf]

Lol @ flowboard.
Great example that some Japanese trends should be ignored

[Impressive]

enjoy japan style

http://www.stancenation.com/wp-content/uploads/2012/11/831.jpg

http://www.stancenation.com/wp-content/uploads/2012/11/881.jpg

http://www.stancenation.com/wp-content/uploads/2012/11/373.jpg

Beautiful fitment on both of those cars...I wish my black GT sedan looked like that :hawt

[Genpu_Mz3]

cant wait for teh comments

http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash3/148137_343317535766105_1563951840_n.jpg

omg if only, thats sick.

[schmat66]

found out more on genpoo

custom work rezax1 18x9.5 +17 18x10.5 -2 is the new rims

old wheels were these

http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash3/182572_4274216167013_1561455542_n.jpg

new rims
http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash4/602451_431863623533994_1413589121_n.jpg
http://sphotos-g.ak.fbcdn.net/hphotos-ak-ash4/483399_4429681053538_824686685_n.jpg

[Dave_The_BMXER]

Oh I know this car now.

[Aitch]

Via NextMod FB.
http://www.torontomazda3.ca/forum/attachment.php?attachmentid=8484&d=1354277972

[CelestSpeed3]

That's the kind of fitment I like.

Aggressive yet functional.

Wait until you see my next year setup.

Volk TE37's in bronze with 20mm spacers and 255/40-17's.


Edit: I just realized the car above has different front and back wheels.

[Marta]

this page is filled with SO much love....
all the pics are mindblowinggggggg

[leecheefoto]

this page is filled with SO much love....
all the pics are mindblowinggggggg

+1

So much ideas making me want to whore on wheels.

[-RJ3-]

The winter mode is helpfull.. It can judge how much tire you are actually using on the snow LMAO

[schmat66]

bwah

http://sphotos-g.ak.fbcdn.net/hphotos-ak-ash3/21808_455443797825361_1518736426_n.jpg

[Tokic_o]

^^^ needs to lose those side mirrors

[The Wolf]

So boring.

[FD22]

^^^ needs to lose those side mirrors

+1

They're so...awkward lol

[Marta]

+1

They're so...awkward lol

hideous!

[-RJ3-]

RHD????? Never heard of this on a Mazda3... could this be an AXELA?

[Aitch]

RHD????? Never heard of this on a Mazda3... could this be an AXELA?

Must be. Everywhere else that is RHD would have a different size license plate (Australia, Germany, UK)

[The Wolf]

IIRC, you can get North American sized plates in the UK

[Shinglez]

Clean.

http://i1166.photobucket.com/albums/q604/DBeets77/rp.jpg

[loosecannon]

Clean.

http://i1166.photobucket.com/albums/q604/DBeets77/rp.jpg

I think now he's running some really aggressive wheels (demon camber).

[schmat66]

Clean.

http://i1166.photobucket.com/albums/q604/DBeets77/rp.jpg

thats an old pic of kevs car...

last set up was this

http://sphotos-a.ak.fbcdn.net/hphotos-ak-snc7/406268_3572198708554_665869316_n.jpg

next he has ordered custom rims.. any guesses on size?

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/552433_3964702520904_939007454_n.jpg

[loosecannon]

thats an old pic of kevs car...

last set up was this

http://sphotos-a.ak.fbcdn.net/hphotos-ak-snc7/406268_3572198708554_665869316_n.jpg

next he has ordered custom rims.. any guesses on size?

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/552433_3964702520904_939007454_n.jpg

I'd say three hundred dollars deep.

[Shinglez]

Haha I didn't even realize

[schmat66]

because i know you all hate his mirrors

http://MazdaFitment.com/wp-content/uploads/2012/11/005.jpg

[stevenma188]

^Spaced out EvoX Enkeis! Love it.

[Aitch]

because i know you all hate his mirrors


I actually think they would look good on a second gen with the more swoopy styling.

[Genpu_Mz3]

this thread is too awesome, makes we want moar low, lil camber just to tease,can't wait till my cars paid off.

[greaves82]

Love it


because i know you all hate his mirrors

http://MazdaFitment.com/wp-content/uploads/2012/11/005.jpg

[Shinglez]

I really like the dual exhaust tip...looks clean as hell

[CH0SiiN1]

Sorry if this has been posted before, too many pages to check while at work ;) and yes I know its a 2 but thought she'd be worthy


http://i878.photobucket.com/albums/ab346/havoc-disciple/4923410355_b7f537cc75_b.jpg

[mEtH]

This image has popped up before in other threads I believe. I think it turned out that it was chopped but don't quote me on that. Still sick for a gas sipper!

[schmat66]

ya it looks photoshopped but id whip it foooo shoo

[Dave_The_BMXER]

I really like the dual exhaust tip...looks clean as hell

I'd been thinking about a dual tip on a hatch. Tis very nice indeed

[Shinglez]

Watched this a few times...a little bit too much camber for my liking but the wheels and ride height are on point :thumbsup


http://www.youtube.com/watch?v=BRXmXM4LkZg

[Thrizzl3]

I really like the dual exhaust tip...looks clean as hell

racing beat exhaust for speed 3..only iceman_f1 has it on his speed.

[Shinglez]

Love everything about this sedan...he even got rid of that stupid 3rd brake light insert in the factory lip spoiler


http://www.youtube.com/watch?v=mV47M4y3Ll8

[Impressive]

**** that sedan is nice!

[Dave_The_BMXER]

That is a very nice sedan.

[mathew.poulos]

Wow... Thats amazing, camber done right.

[thirdgen3]

That is a very nice sedan.

+1 ....looks great!

[The Wolf]

IIRC that sedan was on cut springs?

[schmat66]

here we go, for the snowplows, wait for the comments!!
oh and the hood got replaced because someone kicked his, still needs paint!

http://sphotos-g.ak.fbcdn.net/hphotos-ak-ash4/407307_311351672314532_1256134155_n.jpg

all i know is i love it. and its gangster

[leecheefoto]

Even with unpainted hood it looks good mmn

[GWN]

i like it unpainted, am i weird?

[schmat66]

naw i like it too lol

[Dave_The_BMXER]

If he switched up the grill a bit it would look fine like that.

Rust OCD making me twitch though.

[midnightfxgt]

Needs to fix his mashed up fenders.

[3GFX]

The hood looks good. The little bit of paint on the grill ties it well.

[Impressive]

i like it unpainted, am i weird?

No I agree with you on the unpainted hood looking sharp

[ABZ]

WOW:hawt

http://sphotos-g.ak.fbcdn.net/hphotos-ak-ash4/407307_311351672314532_1256134155_n.jpg

[DarshMZ3]

Does anyone know what wheels are on this car? I was thinking they are varrstoen, but wasn't sure.

http://s8.postimage.org/jpb1jjbk5/Justforkicks2.jpg

[Impressive]

Does anyone know what wheels are on this car? I was thinking they are varrstoen, but wasn't sure.

http://s8.postimage.org/jpb1jjbk5/Justforkicks2.jpg

:like

[The Wolf]

I think those are linea corsa's

[Shinglez]

There are a lot of companies that make LM style rims...hard to tell.

[The Wolf]

He has threads on MF and SW, from his posts I can say they're definitely not Varrstoen.

[Marta]

Does anyone know what wheels are on this car? I was thinking they are varrstoen, but wasn't sure.

http://s8.postimage.org/jpb1jjbk5/Justforkicks2.jpg


K WOW. This car is probably the nicest one ive ever seen

[Marta]

those are CCW rims

[The Wolf]

those are CCW rims

No haha they aren't.

they're BB5's (BBS LM copy). I asked the owner

[Marta]

No haha they aren't.

they're BB5's (BBS LM copy). I asked the owner

hmmm, my friend was wrong then, that bastard.
Time to get quotes :hawt

[The Wolf]

That exact set is for sale 600 shipped..
http://mazdafitment.com/forums/showthread.php?t=1684

[Marta]

That exact set is for sale 600 shipped..

do you know if it will fit on mine and whether my wheel lock would too :S

[leecheefoto]

That exact set is for sale 600 shipped..
http://mazdafitment.com/forums/showthread.php?t=1684

Dammit I pm'd him and he told me it's sold :(

[Marta]

Dammit I pm'd him and he told me it's sold :(

I think Im going after that set-up for the summer. A little less low though.

[GrimeFunkMaster]

Hai Ryan http://img.tapatalk.com/d/13/01/09/tevajyru.jpg

[schmat66]

im in love....

http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/427772_10151245672247462_398917776_n.jpg

[Marta]

im in love....

http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/427772_10151245672247462_398917776_n.jpg

thats sick but Im not a fan of the overwhelming eyelids

[Reddie1337]

thats sick but Im not a fan of the overwhelming eyelids

I gotta go with you on this one, it seems like high beams would be completely useless now, and headlights would probably be hindered.

[leecheefoto]

I gotta go with you on this one, it seems like high beams would be completely useless now, and headlights would probably be hindered.

Driver doesn't have to be punked for leaving his highbeams on, since there's no more glare!
On top of that he'll get that cut off line :chuckle


Clean ride though

[stevenma188]

Those eyelids don't even flow with ANY of the lines on the car. Terrible

[GrimeFunkMaster]

http://img.tapatalk.com/d/13/01/12/qahe7aha.jpg

[The Wolf]

Those eyelids don't even flow with ANY of the lines on the car. Terrible

Yup

[Shinglez]

Not gonna lie, personally I like the lids...they're different and make the car look high as hell haha

[Nextmod]

im in love....

http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/427772_10151245672247462_398917776_n.jpg

those wheels look really familiar ^^ hahah =) !

[schmat66]

okay people we arnt judgeing a car on the eyelids in the "hellaflush thread" disregard the eyelids... the fitment is keey

[Dave_The_BMXER]

I still don't much like the eye lids :P

I enjoy the clean fenders.

[loki]

All I see is eyelids

[The Wolf]

http://cdn.bleacherreport.net/images_root/slides/photos/001/813/163/oie_noah_display_image.jpg?1326874024

[FD22]

http://cdn.bleacherreport.net/images_root/slides/photos/001/813/163/oie_noah_display_image.jpg?1326874024

LOL the similarity is spot on

[6strings]

thats sick but Im not a fan of the overwhelming eyelids
car looks stoned.

[babyblue3]

im in love....

http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/427772_10151245672247462_398917776_n.jpg

I'm in love with those wheels!

[Albin0smurfs]

im in love....

http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/427772_10151245672247462_398917776_n.jpg
Do you know what front bumper and year that is?

[Nextmod]

that is the OEM stock bumper for 07-09 Mazdaspeed 3 Gen 1 =)

[The Wolf]

Do you know what front bumper and year that is?

It won't fit a non-speed Mazda 3 though. Just a heads up

[Shinglez]

http://i1166.photobucket.com/albums/q604/DBeets77/309717_485711338162219_1100453181_n_zps3a6a8f11.jp g

[Dave_The_BMXER]

It won't fit a non-speed Mazda 3 though. Just a heads up

I've been thinking about this (ms3 lip options suck though) with the right amount of work (sectioning) it could probably work right? I mean it would cost a lot (money or manhours) but is theoretically possible with a plastic welder or something?

[Nextmod]

I've been thinking about this (ms3 lip options suck though) with the right amount of work (sectioning) it could probably work right? I mean it would cost a lot (money or manhours) but is theoretically possible with a plastic welder or something?

ive seen it done before.. but it is ALOT of work! you need the speed 3 hood, fenders, and front bumper (and possibly some other small mods here and there)

[The Wolf]

I've been thinking about this (ms3 lip options suck though) with the right amount of work (sectioning) it could probably work right? I mean it would cost a lot (money or manhours) but is theoretically possible with a plastic welder or something?

For sure it's possible if you have the skills and know-how, or money. I could see it being cheaper to trade up to a speed3, or full front end swap than to custom fit a speed3 bumper



ive seen it done before.. but it is ALOT of work! you need the speed 3 hood, fenders, and front bumper (and possibly some other small mods here and there)

Also need the front cowl and rad support. I think Dave was asking about custom-fitting the bumper to the existing NA hood and fenders though.

[Dave_The_BMXER]

ive seen it done before.. but it is ALOT of work! you need the speed 3 hood, fenders, and front bumper (and possibly some other small mods here and there)

Yeah I'm talking just the bumper just sectioned.

I have a lot of silly OEM swaps in my head for Mazda 3s.

IE if I got a speed 3 I'd want to FMIC and swap the other way (reg front on speed3 for sleeperness)

[Aitch]

Anyone wants to be baller and flush, these are REAL nice.

http://i326.photobucket.com/albums/k437/pattrick02/_DSC0604.jpg

Specs, perfect for us:
F - 18x8.5et45
R - 18x9.5et45

Unfortunately asking $2300 + shipping (http://www.stanceworks.com/forums/showthread.php?t=39293) :(

[dentinger]

^^ totally worth it.

[Cab0oze]

http://i1166.photobucket.com/albums/q604/DBeets77/309717_485711338162219_1100453181_n_zps3a6a8f11.jp g

lmao that looks hilarious

-edit-
but wait, is that an orange speed????? <3 Do want...

[Mr Wilson]

Just an MS3 spoiler and lower valence.

[Cab0oze]

Yeah i saw the spoiler, hole-less trunk, valence and speed3 exhaust and figured maybe it was actually a repainted speed...

[Reddie1337]

Yeah i saw the spoiler, hole-less trunk, valence and speed3 exhaust and figured maybe it was actually a repainted speed...

That was my guess. I just like that colour.

[GrimeFunkMaster]

http://i47.photobucket.com/albums/f170/scott_j_mackay/IMG_0310.jpg
http://i47.photobucket.com/albums/f170/scott_j_mackay/IMG_0352.jpg

[schmat66]

lmao that looks hilarious

-edit-
but wait, is that an orange speed????? <3 Do want...

my background atm. i love taylors car

[The Wolf]

Yeah I'm talking just the bumper just sectioned.

I have a lot of silly OEM swaps in my head for Mazda 3s.

IE if I got a speed 3 I'd want to FMIC and swap the other way (reg front on speed3 for sleeperness)

Buy a CWP gen 1 and I'll swap front ends with you

[mEtH]

http://i1166.photobucket.com/albums/q604/DBeets77/309717_485711338162219_1100453181_n_zps3a6a8f11.jp g

This car looks like a hover craft! I am still not a fan of the crazy camber...

[midnightfxgt]

^^^ +1... Mashed up fenders, breaking stuff and looks terrible.

[-RJ3-]

This car looks like a hover craft! I am still not a fan of the crazy camber...

You mean wheelchair camber

[standsideways]

http://i1166.photobucket.com/albums/q604/DBeets77/309717_485711338162219_1100453181_n_zps3a6a8f11.jp g

That shits not even remotely acceptable.

The mazda 3 rice bar has officially been raised by that orange thing

[The Wolf]

That shits not even remotely acceptable.

The mazda 3 rice bar has officially been raised by that orange thing

teenagers gonna teen.

[standsideways]

teenagers gonna teen.

Lol awesome, never heard that one!

[Dave_The_BMXER]

"In the car scene of today, the current trend seems to be pushing cars to their absolute extreme, often leaving any sense of practicality behind in the pursuit of creating the next "big hit." The wheels sit mere millimeters (or less) from the fenders, smashing into them over even the slightest of bumps, while the ground "clearance" insures the body of the car is just as friendly with the pavement. The car becomes more of a chore to drive than enjoyable, and while the cars look fantastic doing this, it makes them less than desirable to drive on a daily basis. "

This.

[Aitch]

Yup. Great intro on that article.

[The Wolf]

http://i22.photobucket.com/albums/b302/ClunBB9/IMG_0457A_zps08b67053.jpg
http://i22.photobucket.com/albums/b302/ClunBB9/IMG_0459_zpse5735ace.jpg

[loki]

those....rims....are..hideous

at least no one will steal them

[The Wolf]

I know they're awful, I love it so much.

[dentinger]

turbo wheels are so cool!

they look better on older german cars though.